fix some shit

Reviewed-on: #2

CMakeLists.txt

@@ -5,8 +5,8 @@ project(xlsw_3dp_ultrasonic_300K)
 
 set(POWER_VOLTAGE "12V")
 set(VERSION_MAJOR 0)
-set(VERSION_MINOR 0)
-set(VERSION_PATCH 13)
+set(VERSION_MINOR 1)
+set(VERSION_PATCH 14)
 set(VERSION "V${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}")
 string(TIMESTAMP CURRENT_DATE "%Y-%m-%d")
 
@@ -29,6 +29,7 @@ set(TARGET_C_SRC
         ${CMAKE_SOURCE_DIR}/src/systick.c
         ${CMAKE_SOURCE_DIR}/src/ultrasonic_driver.c
         ${CMAKE_SOURCE_DIR}/src/mlx90614.c
+        ${CMAKE_SOURCE_DIR}/src/RS485.c
 )
 
 add_executable(xlsw_3dp_ultrasonic_300K ${TARGET_C_SRC})

cmake/toolchain.cmake

@@ -33,8 +33,6 @@ find_program(CMAKE_OBJCOPY NAMES ${TARGET_TRIPLET}-objcopy HINTS ${TOOLCHAIN_BIN
 find_program(CMAKE_OBJDUMP NAMES ${TARGET_TRIPLET}-objdump HINTS ${TOOLCHAIN_BIN_PATH})
 find_program(CMAKE_SIZE NAMES ${TARGET_TRIPLET}-size HINTS ${TOOLCHAIN_BIN_PATH})
 
-
-
 function(print_size_of_target TARGET)
     add_custom_target(${TARGET}_always_display_size
             ALL COMMAND ${CMAKE_SIZE} "$<TARGET_FILE:${TARGET}>"

inc/RS485.h

@@ -0,0 +1,16 @@
+//
+// Created by dell on 24-11-29.
+//
+
+#ifndef RS485_H
+#define RS485_H
+
+#include "gd32e23x_it.h"
+#include <stdbool.h>
+#include <string.h>
+
+#define RX_BUFFER_SIZE 64
+
+void process_command(char *cmd);
+
+#endif //RS485_H

inc/ultrasonic_driver.h

@@ -23,7 +23,7 @@
 #endif
 
 #define ULTRASONIC_CYCLES   0x05U
-#define ULTRASONIC_TRAN_US  998  // (ms)
+#define ULTRASONIC_TRAN_US  498  // (ms)
 
 #define LED_PORT            GPIOA
 #define LED_PIN             GPIO_PIN_9
@@ -34,12 +34,14 @@
 
 #define USART_RCU            RCU_USART0
 #define USART_GPIO_RCU       RCU_GPIOA
-#define USARET_GPIO_PORT     GPIOA
+#define USART_GPIO_PORT      GPIOA
 #define USART_TX_PIN         GPIO_PIN_2
 #define USART_RX_PIN         GPIO_PIN_3
 #define USART0_PHY           USART0
 #define USART_BAUDRATE       115200U
 
+#define USART_EN_PIN         GPIO_PIN_4
+
 #define US_TRAN_GPIO_RCU     RCU_GPIOB
 #define US_TRAN_GPIO_PORT    GPIOB
 #define US_TRAN_PIN          GPIO_PIN_1

openocd_gd32e230f4.cfg

@@ -1,7 +1,7 @@
 # 连接cmsis-dap（喝粥）
 ; interface cmsis-dap
 source [find interface/cmsis-dap.cfg]
-
+; source [find interface/jlink.cfg]
 # 选择SWD
 transport select swd
 

src/RS485.c

@@ -0,0 +1,35 @@
+//
+// Created by dell on 24-11-29.
+//
+
+#include "RS485.h"
+#include "gd32e23x.h"
+#include "systick.h"
+#include <stdio.h>
+#include <stdlib.h>
+
+#define MAX_CMD_SIZE 16
+#define BUFSIZE 8
+
+extern uint16_t g_distance_uint16;
+extern uint16_t g_temperature_uint16;
+
+void process_command(char *cmd) {
+    if (strncmp(cmd, "M1", 2) == 0) {
+        printf("M1 -=-=- OK!\r\n");
+        printf("Distance: %d\r\n", g_distance_uint16);
+    } else if (strncmp(cmd, "M2", 2) == 0) {
+        printf("M2 -=-=- OK!\r\n");
+        printf("Temperature: %d\r\n", g_temperature_uint16);
+// } else if (strncmp(cmd, "M3", 2) == 0) {
+//     char *param_str = cmd + 2; // Skip "M3"
+//     int param = atoi(param_str + 1); // Skip "S" and convert to integer
+//     if (param >= 0 && param <= 100) {
+//         printf("M3 with parameter %d -=-=- OK!\r\n", param);
+//     } else {
+//         printf("Invalid parameter for M3 command!\r\n");
+//     }
+    } else {
+        printf("Invalid Command!\r\n");
+    }
+}

src/gd32e23x_it.c

@@ -37,9 +37,13 @@ OF SUCH DAMAGE.
 #include "main.h"
 #include "systick.h"
 #include "ultrasonic_driver.h"
+#include "rs485.h"
 
 __IO uint32_t g_capture_value;
 
+char rx_buffer[RX_BUFFER_SIZE];
+uint8_t rx_index = 0;
+
 /*!
     \brief      this function handles NMI exception
     \param[in]  none
@@ -62,6 +66,7 @@ void NMI_Handler(void)
 void HardFault_Handler(void)
 {
     /* if Hard Fault exception occurs, go to infinite loop */
+    // log_error("HardFault_Handler");
     while(1) {
     }
 }
@@ -156,4 +161,24 @@ void EXTI0_1_IRQHandler(void) {
         timer_disable(TIMER16);
         exti_interrupt_disable(EXTI_0);
     }
+}
+
+void USART0_IRQHandler(void) {
+    if(RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE))
+    {
+        usart_interrupt_flag_clear(USART0, USART_INT_FLAG_RBNE);
+        uint8_t received_data = (uint8_t)usart_data_receive(USART0);
+
+        // 将接收到的数据存储到缓冲区
+        if(rx_index < RX_BUFFER_SIZE - 1) {
+            rx_buffer[rx_index++] = received_data;
+        }
+
+        // 检查是否接收到换行符，表示指令结束
+        if(received_data == '\n') {
+            rx_buffer[rx_index] = '\0'; // 添加字符串结束符
+            process_command(rx_buffer); // 处理指令
+            rx_index = 0; // 重置缓冲区索引
+        }
+    }
 }

src/main.c

@@ -14,7 +14,8 @@
 #include "mlx90614.h"
 
 extern uint32_t g_capture_value;
-uint16_t distance_uint16;
+uint16_t g_distance_uint16;
+uint16_t g_temperature_uint16;
 
 /*!
     \brief      main function
@@ -34,13 +35,10 @@ int main(void)
 
     /* ---------- debug start ---------- */
 
-
-
-
     /* ---------- debug end ---------- */
 
     printf("\r\n");
-    printf("XLSW-3DP-UltraSonic Analog 300K!\r\n");
+    printf("XLSW-3DP-UltraSonic Analog 300K! V0.1.14\r\n");
     printf("\r\n");
 
     delay_ms(2000);
@@ -48,17 +46,19 @@ int main(void)
     while (1)
     {
         delay_ms(ULTRASONIC_TRAN_US);
-
         UltraSonic_PwmOut_Cycles(ULTRASONIC_CYCLES);
-
         delay_ms(2);
-        printf("cap_val:%ld\t", g_capture_value);
+        // printf("cap_val:%ld\t", g_capture_value);
+        if (g_capture_value <= CAPTURE_VALUE_MAX) {
+            g_distance_uint16 = UltraSonic_CalcDistance(g_capture_value);
+        } else {
+            g_distance_uint16 = 0x0000;
+        }
+        // const char* result = (g_capture_value <= CAPTURE_VALUE_MAX) ? "Distance: %d\t" : "Over Range\t";
+        // printf(result, distance_uint16);
 
-        const char* result = (g_capture_value <= CAPTURE_VALUE_MAX) ? "Distance: %d\t" : "Over Range\t";
-        distance_uint16 = UltraSonic_CalcDistance(g_capture_value);
-        printf(result, distance_uint16);
-
-        printf("Temp:%d\n", MLX90614_GetObjectTemperature());
+        // printf("Temp:%d\n", MLX90614_GetObjectTemperature());
+        g_temperature_uint16 = MLX90614_GetObjectTemperature();
     }
 }
 

src/ultrasonic_driver.c

@@ -39,11 +39,16 @@ void usart_config(void)
     rcu_periph_clock_enable(USART_GPIO_RCU);
     rcu_periph_clock_enable(USART_RCU);
 
-    gpio_af_set(USARET_GPIO_PORT, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);
+    gpio_af_set(USART_GPIO_PORT, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);
 
-    /* configure USART Tx as alternate function push-pull */
-    gpio_mode_set(USARET_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, USART_TX_PIN | USART_RX_PIN);
-    gpio_output_options_set(USARET_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, USART_TX_PIN | USART_RX_PIN);
+    /* configure USART Tx&Rx as alternate function push-pull */
+    gpio_mode_set(USART_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, USART_TX_PIN | USART_RX_PIN);
+    gpio_output_options_set(USART_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, USART_TX_PIN | USART_RX_PIN);
+
+    /* configure RS485 EN Pin */
+    gpio_mode_set(USART_GPIO_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, USART_EN_PIN);
+    gpio_output_options_set(USART_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, USART_EN_PIN);
+    gpio_bit_write(USART_GPIO_PORT, USART_EN_PIN, SET);
 
     /* USART configure */
     usart_deinit(USART0_PHY);
@@ -52,6 +57,9 @@ void usart_config(void)
     usart_transmit_config(USART0_PHY, USART_TRANSMIT_ENABLE);
 
     usart_enable(USART0_PHY);
+
+    nvic_irq_enable(USART0_IRQn, 0);
+    usart_interrupt_enable(USART0_PHY, USART_INT_RBNE);
 }
 
 void UltraSonic_GPIO_Config(void)