hulk/gd32e23x_template
Template
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Revert "test"

Browse Source 
This reverts commit fecaa256ca875a88d75a33249926d835c4ddafe0.
This commit is contained in:
yelvlab 2024-12-30 22:23:47 +08:00
parent fecaa256ca
commit 7fa633805b
19 changed files with 117 additions and 1079 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
CMakeLists.txt
View File

@ -18,11 +18,7 @@ set(TARGET_C_SRC
${CMAKE_SOURCE_DIR}/src/main.c
${CMAKE_SOURCE_DIR}/src/gd32e23x_it.c
${CMAKE_SOURCE_DIR}/src/systick.c
${CMAKE_SOURCE_DIR}/src/rs485.c
${CMAKE_SOURCE_DIR}/src/led.c
${CMAKE_SOURCE_DIR}/src/i2c.c
${CMAKE_SOURCE_DIR}/src/soft_i2c.c
${CMAKE_SOURCE_DIR}/src/fwdgt.c
${CMAKE_SOURCE_DIR}/src/peripheral.c
)
add_executable(gd32e23x_template ${TARGET_C_SRC})

1
README.md
View File

@ -15,6 +15,7 @@ set(TARGET_C_SRC
${CMAKE_SOURCE_DIR}/src/main.c
${CMAKE_SOURCE_DIR}/src/gd32e23x_it.c
${CMAKE_SOURCE_DIR}/src/systick.c
${CMAKE_SOURCE_DIR}/src/peripheral.c
)
```
## 关于链接脚本

44
inc/board_config.h
View File

@ -1,44 +0,0 @@
//
// Created by dell on 24-12-28.
//
#ifndef BOARD_CONFIG_H
#define BOARD_CONFIG_H
#define SOFTWARE_IIC
// #define DEBUG_VERBOES
/******************************************************************************/
#define RCU_GPIO_I2C RCU_GPIOF
#define RCU_I2C RCU_I2C0
#define I2C_SCL_PORT GPIOF
#define I2C_SCL_PIN GPIO_PIN_1
#define I2C_SDA_PORT GPIOF
#define I2C_SDA_PIN GPIO_PIN_0
#define I2C_GPIO_AF GPIO_AF_1
/******************************************************************************/
#define RS485_RCU RCU_USART0
#define RS485_GPIO_RCU RCU_GPIOA
#define RS485_GPIO_PORT GPIOA
#define RS485_TX_PIN GPIO_PIN_2
#define RS485_RX_PIN GPIO_PIN_3
#define RS485_PHY USART0
#define RS485_BAUDRATE 115200U
#define RS485_EN_PIN GPIO_PIN_1
/******************************************************************************/
#define LED_PORT GPIOA
#define LED_PIN GPIO_PIN_7
#define LED_RCU RCU_GPIOA
#define LED_BLINK_TIMER_RCU RCU_TIMER16
#define LED_BLINK_TIMER TIMER16
#define LED_BLINK_IRQ TIMER16_IRQn
/******************************************************************************/
#endif //BOARD_CONFIG_H

15
inc/fwdgt.h
View File

@ -1,15 +0,0 @@
//
// Created by yelv1 on 24-12-29.
//
#ifndef FWDGT_H
#define FWDGT_H
#include "gd32e23x.h"
#include "board_config.h"
void watchdog_init(void);
void fwdgt_reset_mcu(void);
#endif //FWDGT_H

48
inc/i2c.h
View File

@ -1,48 +0,0 @@
//
// Created by dell on 24-12-20.
//
#ifndef I2C_H
#define I2C_H
#include "gd32e23x_it.h"
#include "gd32e23x.h"
#include "systick.h"
#include "main.h"
#include "board_config.h"
/******************************************************************************/
#define I2C_SPEED 20000
#define I2C_TIME_OUT (uint16_t)(5000)
#define I2C_OK 1
#define I2C_FAIL 0
#define I2C_END 1
/******************************************************************************/
typedef enum {
I2C_START = 0,
I2C_SEND_ADDRESS,
I2C_CLEAR_ADDRESS_FLAG,
I2C_TRANSMIT_DATA,
I2C_STOP
} i2c_process_enum;
/******************************************************************************/
void i2c_gpio_config(void);
void i2c_config(void);
void i2c_bus_reset(void);
void i2c_scan(void);
uint8_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]);
uint8_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data);
#endif //I2C_H

13
inc/led.h
View File

@ -1,13 +0,0 @@
//
// Created by dell on 24-12-20.
//
#ifndef LED_H
#define LED_H
#include "gd32e23x_it.h"
#include "board_config.h"
void led_config(void);
#endif //LED_H

16
inc/main.h
View File

@ -35,20 +35,4 @@ OF SUCH DAMAGE.
#ifndef MAIN_H
#define MAIN_H
#include <stdio.h>
#include "gd32e23x.h"
#include "systick.h"
#include "gd32e23x_libopt.h"
#include "rs485.h"
#include "led.h"
#include "fwdgt.h"
#include "board_config.h"
#ifdef SOFTWARE_IIC
#include "soft_i2c.h"
#else
#include "i2c.h"
#endif
#endif /* MAIN_H */

11
inc/peripheral.h Normal file
View File

@ -0,0 +1,11 @@
//
// Created by yelv1 on 24-9-22.
//
#ifndef PERIPHERAL_H
#define PERIPHERAL_H
void usart_config(void);
void led_blink_config(void);
#endif //PERIPHERAL_H

22
inc/rs485.h
View File

@ -1,22 +0,0 @@
//
// Created by dell on 24-12-3.
//
#ifndef RS485_H
#define RS485_H
#include "gd32e23x_it.h"
#include "gd32e23x.h"
#include "board_config.h"
/******************************************************************************/
#define RX_BUFFER_SIZE 32
/******************************************************************************/
void usart_config(void);
void rs485_config(void);
#endif //RS485_H

53
inc/soft_i2c.h
View File

@ -1,53 +0,0 @@
//
// Created by dell on 24-12-28.
//
#ifndef SOFT_I2C_H
#define SOFT_I2C_H
#include "gd32e23x_it.h"
#include "gd32e23x.h"
#include "systick.h"
#include "main.h"
#include "board_config.h"
/******************************************************************************/
#define I2C_SCL_HIGH() gpio_bit_set(I2C_SCL_PORT, I2C_SCL_PIN)
#define I2C_SCL_LOW() gpio_bit_reset(I2C_SCL_PORT, I2C_SCL_PIN)
#define I2C_SDA_HIGH() gpio_bit_set(I2C_SDA_PORT, I2C_SDA_PIN)
#define I2C_SDA_LOW() gpio_bit_reset(I2C_SDA_PORT, I2C_SDA_PIN)
#define I2C_SDA_READ() gpio_input_bit_get(I2C_SDA_PORT, I2C_SDA_PIN)
/******************************************************************************/
#define SOFT_I2C_OK 1
#define SOFT_I2C_FAIL 0
#define SOFT_I2C_END 1
/******************************************************************************/
void soft_i2c_delay(void);
void soft_i2c_config(void);
void soft_i2c_start(void);
void soft_i2c_stop(void);
void soft_i2c_send_ack(void);
void soft_i2c_send_nack(void);
uint8_t soft_i2c_wait_ack(void);
void soft_i2c_send_byte(uint8_t data);
uint8_t soft_i2c_receive_byte(uint8_t ack);
uint8_t soft_i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]);
uint8_t soft_i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data);
#endif //SOFT_I2C_H

2
sdk/CMSIS/src/system_gd32e23x.c
View File

@ -45,7 +45,7 @@
/* select a system clock by uncommenting the following line */
//#define __SYSTEM_CLOCK_8M_HXTAL (__HXTAL)
// #define __SYSTEM_CLOCK_8M_IRC8M (__IRC8M)
//#define __SYSTEM_CLOCK_8M_IRC8M (__IRC8M)
// #define __SYSTEM_CLOCK_72M_PLL_HXTAL (uint32_t)(72000000)
#define __SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2 (uint32_t)(72000000)

28
src/fwdgt.c
View File

@ -1,28 +0,0 @@
//
// Created by yelv1 on 24-12-29.
//
#include "fwdgt.h"
void watchdog_init(void) {
/* Enable the LSI clock */
rcu_osci_on(RCU_IRC40K);
rcu_osci_stab_wait(RCU_IRC40K);
/* Configure FWDGT counter clock: 40KHz(IRC40K) / 64 = 0.625 KHz */
fwdgt_config(625, FWDGT_PSC_DIV64); // Set timeout to 1 seconds (625 / 0.625 KHz)
/* Enable FWDGT */
fwdgt_enable();
}
void fwdgt_reset_mcu(void) {
/* Enable the write access to the FWDGT_CTL register */
FWDGT_CTL = FWDGT_WRITEACCESS_ENABLE;
/* Configure FWDGT to trigger a system reset */
fwdgt_config(50, FWDGT_PSC_DIV4);
/* Reload the counter to trigger the reset */
fwdgt_counter_reload();
}

54
src/gd32e23x_it.c
View File

@ -35,8 +35,6 @@ OF SUCH DAMAGE.
#include "gd32e23x_it.h"
#include "main.h"
#include "systick.h"
#include "rs485.h"
#include "led.h"
/*!
\brief this function handles NMI exception
@ -44,9 +42,10 @@ OF SUCH DAMAGE.
\param[out] none
\retval none
*/
void NMI_Handler(void) {
void NMI_Handler(void)
{
/* if NMI exception occurs, go to infinite loop */
while (1) {
while(1) {
}
}
@ -56,9 +55,10 @@ void NMI_Handler(void) {
\param[out] none
\retval none
*/
void HardFault_Handler(void) {
void HardFault_Handler(void)
{
/* if Hard Fault exception occurs, go to infinite loop */
while (1) {
while(1) {
}
}
@ -68,9 +68,10 @@ void HardFault_Handler(void) {
\param[out] none
\retval none
*/
void SVC_Handler(void) {
void SVC_Handler(void)
{
/* if SVC exception occurs, go to infinite loop */
while (1) {
while(1) {
}
}
@ -80,9 +81,10 @@ void SVC_Handler(void) {
\param[out] none
\retval none
*/
void PendSV_Handler(void) {
void PendSV_Handler(void)
{
/* if PendSV exception occurs, go to infinite loop */
while (1) {
while(1) {
}
}
@ -92,26 +94,26 @@ void PendSV_Handler(void) {
\param[out] none
\retval none
*/
void SysTick_Handler(void) {
void SysTick_Handler(void)
{
}
/**
* @brief This function handles TIMER5 interrupt request.
* @param[in] none
* @param[out] none
* @retval None
*/
void TIMER16_IRQHandler(void) {
if (timer_interrupt_flag_get(LED_BLINK_TIMER, TIMER_INT_FLAG_UP) == SET) {
timer_interrupt_flag_clear(LED_BLINK_TIMER, TIMER_INT_FLAG_UP);
void TIMER13_IRQHandler(void)
{
if (timer_interrupt_flag_get(TIMER13, TIMER_INT_FLAG_UP) == SET)
{
timer_interrupt_flag_clear(TIMER13, TIMER_INT_FLAG_UP);
static uint8_t led_status = 0;
if (led_status) {
gpio_bit_write(LED_PORT, LED_PIN, RESET);
timer_autoreload_value_config(LED_BLINK_TIMER, 19200);
if (led_status)
{
//! turn on led & reconfig timer13 period to 19000(1900ms)
gpio_bit_write(GPIOB, GPIO_PIN_1, RESET);
timer_autoreload_value_config(TIMER13, 19200);
} else {
gpio_bit_write(LED_PORT, LED_PIN, SET);
timer_autoreload_value_config(LED_BLINK_TIMER, 800);
//! turn off led & reconfig timer13 period to 1000(100ms)
gpio_bit_write(GPIOB, GPIO_PIN_1, SET);
timer_autoreload_value_config(TIMER13, 800);
}
led_status = !led_status;
}
}
}

491
src/i2c.c
View File

@ -1,491 +0,0 @@
//
// Created by dell on 24-12-20.
//
#include "i2c.h"
/*!
\brief configure the GPIO ports
\param[in] none
\param[out] none
\retval none
*/
void i2c_gpio_config(void) {
/* enable IIC GPIO clock */
rcu_periph_clock_enable(RCU_GPIO_I2C);
/* connect I2C_SCL_PIN to I2C_SCL */
gpio_af_set(I2C_SCL_PORT, I2C_GPIO_AF, I2C_SCL_PIN);
/* connect I2C_SDA_PIN to I2C_SDA */
gpio_af_set(I2C_SDA_PORT, I2C_GPIO_AF, I2C_SDA_PIN);
/* configure GPIO pins of I2C */
gpio_mode_set(I2C_SCL_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, I2C_SCL_PIN);
gpio_output_options_set(I2C_SCL_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SCL_PIN);
gpio_mode_set(I2C_SDA_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, I2C_SDA_PIN);
gpio_output_options_set(I2C_SDA_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SDA_PIN);
}
/*!
\brief configure the I2CX interface
\param[in] none
\param[out] none
\retval none
*/
void i2c_config(void) {
/* configure I2C GPIO */
i2c_gpio_config();
/* enable I2C clock */
rcu_periph_clock_enable(RCU_I2C);
/* configure I2C clock */
i2c_clock_config(I2C0, I2C_SPEED, I2C_DTCY_2);
/* configure I2C address */
i2c_mode_addr_config(I2C0, I2C_I2CMODE_ENABLE, I2C_ADDFORMAT_7BITS, 0xA0);
/* enable I2CX */
i2c_enable(I2C0);
/* enable acknowledge */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
}
/*!
\brief reset I2C bus
\param[in] none
\param[out] none
\retval none
*/
void i2c_bus_reset(void) {
i2c_deinit(I2C0);
/* configure SDA/SCL for GPIO */
GPIO_BC(I2C_SCL_PORT) |= I2C_SCL_PIN;
GPIO_BC(I2C_SDA_PORT) |= I2C_SDA_PIN;
gpio_output_options_set(I2C_SCL_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, I2C_SCL_PIN);
gpio_output_options_set(I2C_SDA_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, I2C_SDA_PIN);
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
GPIO_BOP(I2C_SCL_PORT) |= I2C_SCL_PIN;
__NOP();
__NOP();
__NOP();
__NOP();
__NOP();
GPIO_BOP(I2C_SDA_PORT) |= I2C_SDA_PIN;
/* connect I2C_SCL_PIN to I2C_SCL */
/* connect I2C_SDA_PIN to I2C_SDA */
gpio_output_options_set(I2C_SCL_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SCL_PIN);
gpio_output_options_set(I2C_SDA_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SDA_PIN);
/* configure the I2CX interface */
i2c_config();
}
/**
* @brief 扫描I2C总线，查找连接的设备
*
* 该函数会扫描I2C总线上的所有地址（1到126），并尝试与每个地址进行通信。
* 如果在某个地址上发现了设备，则会打印出该设备的地址。
* 最后会打印出找到的设备总数。
*/
void i2c_scan(void) {
uint32_t timeout;
uint8_t address;
int found_devices = 0;
printf("Scanning I2C bus...\r\n");
for (address = 1; address < 127; address++) {
timeout = 0;
// 生成起始条件
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout >= I2C_TIME_OUT) {
continue; // 超时，跳过该地址
}
i2c_start_on_bus(I2C0);
timeout = 0;
// 等待起始条件发送完成
while (!i2c_flag_get(I2C0, I2C_FLAG_SBSEND) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout >= I2C_TIME_OUT) {
continue; // 超时，跳过该地址
}
i2c_master_addressing(I2C0, (address << 1), I2C_TRANSMITTER);
timeout = 0;
// 等待地址发送完成
while (!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout < I2C_TIME_OUT) {
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
printf("Found device at 0x%02X\r\n", address);
found_devices++;
}
// 生成停止条件
i2c_stop_on_bus(I2C0);
timeout = 0;
while (i2c_flag_get(I2C0, I2C_FLAG_STPDET) && (timeout < I2C_TIME_OUT))
timeout++;
}
if (found_devices == 0) {
printf("No I2C devices found.\r\n");
} else {
printf("Total %d I2C devices found.\r\n", found_devices);
}
}
/*!
\brief write 16 bits data to the specified register of the slave device
\param[in] slave_addr: slave device address
\param[in] reg_addr: register address
\param[in] data: data to be written
\param[out] none
\retval 0: failed, 1: success
*/
uint8_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]) {
uint8_t state = I2C_START;
uint16_t timeout = 0;
uint8_t i2c_timeout_flag = 0;
/* enable acknowledge */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
while (!(i2c_timeout_flag)) {
switch (state) {
case I2C_START:
/* i2c master sends start signal only when the bus is idle */
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
i2c_start_on_bus(I2C0);
timeout = 0;
state = I2C_SEND_ADDRESS;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c bus is busy in WRITE BYTE!\n");
#endif
}
break;
case I2C_SEND_ADDRESS:
/* i2c master sends START signal successfully */
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
i2c_master_addressing(I2C0, slave_addr, I2C_TRANSMITTER);
timeout = 0;
state = I2C_CLEAR_ADDRESS_FLAG;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master sends start signal timeout in WRITE BYTE!\n");
#endif
}
break;
case I2C_CLEAR_ADDRESS_FLAG:
/* address flag set means i2c slave sends ACK */
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
timeout = 0;
state = I2C_TRANSMIT_DATA;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master clears address flag timeout in WRITE BYTE!\n");
#endif
}
break;
case I2C_TRANSMIT_DATA:
/* wait until the transmit data buffer is empty */
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
/* send IIC register address */
i2c_data_transmit(I2C0, reg_addr);
timeout = 0;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master sends data timeout in WRITE BYTE!\n");
#endif
}
/* wait until BTC bit is set */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
/* send register MSB value */
i2c_data_transmit(I2C0, data[0]);
timeout = 0;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master sends MSB data timeout in WRITE BYTE!\n");
#endif
}
/* wait until BTC bit is set */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
/* send register LSB value */
i2c_data_transmit(I2C0, data[1]);
timeout = 0;
state = I2C_STOP;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master sends LSB data timeout in WRITE BYTE!\n");
#endif
}
/* wait until BTC bit is set */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
state = I2C_STOP;
timeout = 0;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master sends data timeout in WRITE BYTE!\n");
#endif
}
break;
case I2C_STOP:
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
/* i2c master sends STOP signal successfully */
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
timeout = 0;
state = I2C_END;
i2c_timeout_flag = I2C_OK;
} else {
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c master sends stop signal timeout in WRITE BYTE!\n");
#endif
}
break;
default:
state = I2C_START;
i2c_timeout_flag = I2C_OK;
timeout = 0;
#ifdef DEBUG_VERBOES
printf("i2c master sends start signal in WRITE BYTE.\n");
#endif
break;
}
}
return I2C_END;
}
/*!
\brief read 16 bits data from the specified register of the slave device
\param[in] slave_addr: slave device address
\param[in] reg_addr: register address
\param[out] data: data to be read
\retval 0: failed, 1: success
*/
uint8_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data) {
uint8_t state = I2C_START;
uint8_t read_cycle = 0;
uint16_t timeout = 0;
uint8_t i2c_timeout_flag = 0;
uint8_t number_of_byte = 2;
/* enable acknowledge */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
while (!(i2c_timeout_flag)) {
switch (state) {
case I2C_START:
if (RESET == read_cycle) {
/* i2c master sends start signal only when the bus is idle */
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
/* whether to send ACK or not for the next byte */
i2c_ackpos_config(I2C0, I2C_ACKPOS_NEXT);
} else {
// i2c_bus_reset();
timeout = 0;
state = I2C_START;
#ifdef DEBUG_VERBOES
printf("i2c bus is busy in READ!\n");
#endif
}
}
/* send the start signal */
i2c_start_on_bus(I2C0);
timeout = 0;
state = I2C_SEND_ADDRESS;
break;
case I2C_SEND_ADDRESS:
/* i2c master sends START signal successfully */
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
if (RESET == read_cycle) {
i2c_master_addressing(I2C0, slave_addr, I2C_TRANSMITTER);
state = I2C_CLEAR_ADDRESS_FLAG;
} else {
i2c_master_addressing(I2C0, slave_addr, I2C_RECEIVER);
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
state = I2C_CLEAR_ADDRESS_FLAG;
}
timeout = 0;
} else {
timeout = 0;
state = I2C_START;
read_cycle = RESET;
#ifdef DEBUG_VERBOES
printf("i2c master sends start signal timeout in READ!\n");
#endif
}
break;
case I2C_CLEAR_ADDRESS_FLAG:
/* address flag set means i2c slave sends ACK */
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
if ((SET == read_cycle) && (1 == number_of_byte)) {
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
}
timeout = 0;
state = I2C_TRANSMIT_DATA;
} else {
timeout = 0;
state = I2C_START;
read_cycle = RESET;
#ifdef DEBUG_VERBOES
printf("i2c master clears address flag timeout in READ!\n");
#endif
}
break;
case I2C_TRANSMIT_DATA:
if (RESET == read_cycle) {
/* wait until the transmit data buffer is empty */
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
/* send the EEPROM's internal address to write to : only one byte address */
i2c_data_transmit(I2C0, reg_addr);
timeout = 0;
} else {
timeout = 0;
state = I2C_START;
read_cycle = RESET;
#ifdef DEBUG_VERBOES
printf("i2c master wait data buffer is empty timeout in READ!\n");
#endif
}
/* wait until BTC bit is set */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
timeout = 0;
state = I2C_START;
read_cycle = SET;
} else {
timeout = 0;
state = I2C_START;
read_cycle = RESET;
#ifdef DEBUG_VERBOES
printf("i2c master sends register address timeout in READ!\n");
#endif
}
} else {
while (number_of_byte) {
timeout++;
if (2 == number_of_byte) {
/* wait until BTC bit is set */
while (!i2c_flag_get(I2C0, I2C_FLAG_BTC));
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
}
/* wait until RBNE bit is set */
if (i2c_flag_get(I2C0, I2C_FLAG_RBNE)) {
/* read a byte from the EEPROM */
*data = i2c_data_receive(I2C0);
/* point to the next location where the byte read will be saved */
data++;
/* decrement the read bytes counter */
number_of_byte--;
timeout = 0;
}
if (timeout > I2C_TIME_OUT) {
timeout = 0;
state = I2C_START;
read_cycle = 0;
#ifdef DEBUG_VERBOES
printf("i2c master sends data timeout in READ!\n");
#endif
}
}
timeout = 0;
state = I2C_STOP;
}
break;
case I2C_STOP:
/* i2c master sends STOP signal successfully */
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout < I2C_TIME_OUT) {
timeout = 0;
state = I2C_END;
i2c_timeout_flag = I2C_OK;
} else {
timeout = 0;
state = I2C_START;
read_cycle = 0;
#ifdef DEBUG_VERBOES
printf("i2c master sends stop signal timeout in READ!\n");
#endif
}
break;
default:
state = I2C_START;
read_cycle = 0;
i2c_timeout_flag = I2C_OK;
timeout = 0;
#ifdef DEBUG_VERBOES
printf("i2c master sends start signal in READ.\n");
#endif
break;
}
}
return I2C_END;
}

38
src/led.c
View File

@ -1,38 +0,0 @@
//
// Created by dell on 24-12-20.
//
#include "led.h"
/*!
\brief configure LED
\param[in] none
\param[out] none
\retval none
*/
void led_config(void) {
rcu_periph_clock_enable(LED_RCU);
gpio_mode_set(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_PIN);
gpio_output_options_set(LED_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, LED_PIN);
gpio_bit_write(LED_PORT, LED_PIN, SET);
rcu_periph_clock_enable(LED_BLINK_TIMER_RCU);
timer_deinit(LED_BLINK_TIMER);
timer_parameter_struct timer_initpara;
timer_struct_para_init(&timer_initpara);
timer_initpara.prescaler = 7199;
timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
timer_initpara.counterdirection = TIMER_COUNTER_UP;
timer_initpara.period = 9999;
timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
timer_init(LED_BLINK_TIMER, &timer_initpara);
timer_auto_reload_shadow_enable(LED_BLINK_TIMER);
timer_interrupt_enable(LED_BLINK_TIMER, TIMER_INT_UP);
timer_enable(LED_BLINK_TIMER);
nvic_irq_enable(LED_BLINK_IRQ, 2);
}

25
src/main.c
View File

@ -5,6 +5,12 @@
\version 2024-02-22, V2.1.0, firmware for GD32E23x
*/
#include "main.h"
#include <stdio.h>
#include "gd32e23x.h"
#include "systick.h"
#include "gd32e23x_libopt.h"
#include "peripheral.h"
/*!
\brief main function
@ -12,26 +18,19 @@
\param[out] none
\retval none
*/
int main(void) {
// setbuf(stdout, NULL);
int main(void)
{
/* configure systick */
systick_config();
/* configure USART */
// rs485_config();
/* configure LED */
// led_config();
usart_config();
led_blink_config();
delay_ms(5000);
printf("system start!\r\n");
rcu_periph_clock_enable(RCU_GPIOA);
gpio_mode_set(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_7);
gpio_output_options_set(GPIOA, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_7);
gpio_bit_write(GPIOA, GPIO_PIN_7, SET);
while(1){
printf("hello world!\r\n");
delay_ms(1000);
delay_ms(5000);
}
}

63
src/peripheral.c Normal file
View File

@ -0,0 +1,63 @@
//
// Created by yelv1 on 24-9-22.
//
#include "peripheral.h"
#include "gd32e23x.h"
void usart_config(void)
{
rcu_periph_clock_enable(RCU_GPIOA);
rcu_periph_clock_enable(RCU_USART0);
gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_3);
gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_2);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_3);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_3);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_2);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_2);
usart_deinit(USART0);
usart_baudrate_set(USART0, 115200U);
usart_receive_config(USART0, USART_RECEIVE_ENABLE);
usart_transmit_config(USART0, USART_TRANSMIT_ENABLE);
usart_enable(USART0);
gpio_mode_set(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_4);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_4);
gpio_bit_write(GPIOA, GPIO_PIN_4, SET);
}
/*!
\brief led blink configuration
\param[in] none
\param[out] none
\retval none
*/
void led_blink_config(void)
{
rcu_periph_clock_enable(RCU_GPIOB);
gpio_mode_set(GPIOB, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO_PIN_1);
gpio_output_options_set(GPIOB, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_1);
gpio_bit_write(GPIOB, GPIO_PIN_1, SET);
rcu_periph_clock_enable(RCU_TIMER13);
timer_deinit(RCU_TIMER13);
timer_parameter_struct timer_initpara;
timer_struct_para_init(&timer_initpara);
timer_initpara.prescaler =7199;
timer_initpara.alignedmode =TIMER_COUNTER_EDGE;
timer_initpara.counterdirection =TIMER_COUNTER_UP;
timer_initpara.period =999;
timer_initpara.clockdivision =TIMER_CKDIV_DIV1;
timer_init(TIMER13, &timer_initpara);
timer_auto_reload_shadow_enable(TIMER13);
timer_interrupt_enable(TIMER13, TIMER_INT_UP);
nvic_irq_enable(TIMER13_IRQn, 0);
timer_enable(TIMER13);
}

49
src/rs485.c
View File

@ -1,49 +0,0 @@
//
// Created by dell on 24-12-3.
//
#include "rs485.h"
/**
* @brief configure the USART0
* @param none
* @retval none
*/
void usart_config(void) {
rcu_periph_clock_enable(RS485_GPIO_RCU);
rcu_periph_clock_enable(RS485_RCU);
gpio_af_set(RS485_GPIO_PORT, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);
/* configure USART Tx&Rx as alternate function push-pull */
gpio_mode_set(RS485_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, RS485_TX_PIN | RS485_RX_PIN);
gpio_output_options_set(RS485_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, RS485_TX_PIN | RS485_RX_PIN);
/* USART configure */
usart_deinit(RS485_PHY);
usart_baudrate_set(RS485_PHY, RS485_BAUDRATE);
usart_receive_config(RS485_PHY, USART_RECEIVE_ENABLE);
usart_transmit_config(RS485_PHY, USART_TRANSMIT_ENABLE);
usart_enable(RS485_PHY);
nvic_irq_enable(USART0_IRQn, 0);
usart_interrupt_enable(RS485_PHY, USART_INT_RBNE);
usart_interrupt_enable(RS485_PHY, USART_INT_IDLE);
}
/**
* @brief configure the RS485(MAX13487EESA)
* @param none
* @retval none
*/
void rs485_config(void) {
usart_config();
rcu_periph_clock_enable(RS485_GPIO_RCU);
/* configure RS485 EN Pin */
gpio_mode_set(RS485_GPIO_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, RS485_EN_PIN);
gpio_output_options_set(RS485_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, RS485_EN_PIN);
gpio_bit_write(RS485_GPIO_PORT, RS485_EN_PIN, SET); // auto direction control
}

217
src/soft_i2c.c
View File

@ -1,217 +0,0 @@
//
// Created by dell on 24-12-28.
//
#include "soft_i2c.h"
/*!
\brief delay
\param[in] none
\param[out] none
\retval none
*/
void soft_i2c_delay(void) {
delay_us(20); // Adjust delay as needed
/* delay to freq
* 15KHz: delay_us(20);
* 65KHz: delay_us(1);
*/
}
/*!
\brief configure the software IIC GPIO
\param[in] none
\param[out] none
\retval none
*/
void soft_i2c_config(void) {
rcu_periph_clock_enable(RCU_GPIO_I2C);
gpio_mode_set(I2C_SCL_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, I2C_SCL_PIN);
gpio_output_options_set(I2C_SCL_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SCL_PIN);
gpio_mode_set(I2C_SDA_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, I2C_SDA_PIN);
gpio_output_options_set(I2C_SDA_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SDA_PIN);
I2C_SCL_HIGH();
I2C_SDA_HIGH();
}
/*!
\brief generate I2C start signal
\param[in] none
\param[out] none
\retval none
*/
void soft_i2c_start(void) {
I2C_SDA_HIGH();
I2C_SCL_HIGH();
soft_i2c_delay();
I2C_SDA_LOW();
soft_i2c_delay();
I2C_SCL_LOW();
}
/*!
\brief generate I2C stop signal
\param[in] none
\param[out] none
\retval none
*/
void soft_i2c_stop(void) {
// sda_out();
I2C_SCL_LOW();
I2C_SDA_LOW();
soft_i2c_delay();
I2C_SCL_HIGH();
soft_i2c_delay();
I2C_SDA_HIGH();
}
/*!
\brief send I2C ACK signal
\param[in] none
\param[out] none
\retval none
*/
void soft_i2c_send_ack(void) {
// sda_out();
I2C_SDA_LOW();
soft_i2c_delay();
I2C_SCL_HIGH();
soft_i2c_delay();
I2C_SCL_LOW();
soft_i2c_delay();
I2C_SDA_HIGH();
}
/*!
\brief send I2C NACK signal
\param[in] none
\param[out] none
\retval none
*/
void soft_i2c_send_nack(void) {
I2C_SDA_HIGH();
soft_i2c_delay();
I2C_SCL_HIGH();
soft_i2c_delay();
I2C_SCL_LOW();
soft_i2c_delay();
I2C_SDA_HIGH();
}
/*!
\brief wait I2C ACK signal
\param[in] none
\param[out] none
\retval 0: ACK received, 1: ACK not received
*/
uint8_t soft_i2c_wait_ack(void) {
I2C_SDA_HIGH();
soft_i2c_delay();
I2C_SCL_HIGH();
soft_i2c_delay();
uint8_t ack = !I2C_SDA_READ();
I2C_SCL_LOW();
return ack;
}
/*!
\brief send a byte via I2C
\param[in] byte: byte to be sent
\param[out] none
\retval none
*/
void soft_i2c_send_byte(uint8_t byte) {
// sda_out();
for (int i = 0; i < 8; i++) {
if (byte & 0x80) {
I2C_SDA_HIGH();
} else {
I2C_SDA_LOW();
}
byte <<= 1;
soft_i2c_delay();
I2C_SCL_HIGH();
soft_i2c_delay();
I2C_SCL_LOW();
soft_i2c_delay();
}
}
/*!
\brief receive a byte via I2C
\param[in] ack: 1: send ACK, 0: send NACK
\param[out] none
\retval received byte
*/
uint8_t soft_i2c_receive_byte(uint8_t ack) {
uint8_t byte = 0;
I2C_SDA_HIGH();
for (int i = 0; i < 8; i++) {
byte <<= 1;
I2C_SCL_HIGH();
soft_i2c_delay();
if (I2C_SDA_READ()) {
byte |= 0x01;
}
I2C_SCL_LOW();
soft_i2c_delay();
}
if (ack) {
soft_i2c_send_ack();
} else {
soft_i2c_send_nack();
}
return byte;
}
uint8_t soft_i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]) {
soft_i2c_start();
soft_i2c_send_byte(slave_addr);
if (!soft_i2c_wait_ack()) {
soft_i2c_stop();
return SOFT_I2C_FAIL;
}
soft_i2c_send_byte(reg_addr);
if (!soft_i2c_wait_ack()) {
soft_i2c_stop();
return SOFT_I2C_FAIL;
}
soft_i2c_send_byte(data[0]);
if (!soft_i2c_wait_ack()) {
soft_i2c_stop();
return SOFT_I2C_FAIL;
}
soft_i2c_send_byte(data[1]);
if (soft_i2c_wait_ack()){}
soft_i2c_stop();
return SOFT_I2C_OK;
}
uint8_t soft_i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data)
{
soft_i2c_start();
soft_i2c_send_byte(slave_addr);
if (!soft_i2c_wait_ack()) {
soft_i2c_stop();
return SOFT_I2C_FAIL;
}
soft_i2c_send_byte(reg_addr);
if (!soft_i2c_wait_ack()) {
soft_i2c_stop();
return SOFT_I2C_FAIL;
}
soft_i2c_start();
soft_i2c_send_byte(slave_addr | 0x01);
if (!soft_i2c_wait_ack()) {
soft_i2c_stop();
return SOFT_I2C_FAIL;
}
soft_i2c_delay();
data[0] = soft_i2c_receive_byte(1);
data[1] = soft_i2c_receive_byte(0);
soft_i2c_stop();
return SOFT_I2C_OK;
}