添加485获取特定命令或者命令加参数的形式

inc/RS485.h

@@ -5,7 +5,12 @@
 #ifndef RS485_H
 #define RS485_H
 
+#include "gd32e23x_it.h"
 #include <stdbool.h>
 #include <string.h>
 
+#define RX_BUFFER_SIZE 64
+
+void process_command(char *cmd);
+
 #endif //RS485_H

src/RS485.c

@@ -11,19 +11,25 @@
 #define MAX_CMD_SIZE 16
 #define BUFSIZE 8
 
-static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE];
+extern uint16_t g_distance_uint16;
-static char *strchr_pointer = NULL;
+extern uint16_t g_temperature_uint16;
 
-static int bufindr = 0;
+void process_command(char *cmd) {
-static int bufindw = 0;
+    if (strncmp(cmd, "M1", 2) == 0) {
-static int buflen = 0;
+        printf("M1 -=-=- OK!\r\n");
-
+        printf("Distance: %d\r\n", g_distance_uint16);
-bool code_seen(char code)
+    } else if (strncmp(cmd, "M2", 2) == 0) {
-{
+        printf("M2 -=-=- OK!\r\n");
-    strchr_pointer = strchr(cmdbuffer[bufindr], code);
+        printf("Temperature: %d\r\n", g_temperature_uint16);
-    return (strchr_pointer != NULL);  //Return True if a character was found
+// } else if (strncmp(cmd, "M3", 2) == 0) {
-}
+//     char *param_str = cmd + 2; // Skip "M3"
-float code_value(void)
+//     int param = atoi(param_str + 1); // Skip "S" and convert to integer
-{
+//     if (param >= 0 && param <= 100) {
-    return (strtod(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL));
+//         printf("M3 with parameter %d -=-=- OK!\r\n", param);
+//     } else {
+//         printf("Invalid parameter for M3 command!\r\n");
+//     }
+    } else {
+        printf("Invalid Command!\r\n");
+    }
 }

src/gd32e23x_it.c

@@ -37,9 +37,13 @@ OF SUCH DAMAGE.
 #include "main.h"
 #include "systick.h"
 #include "ultrasonic_driver.h"
+#include "rs485.h"
 
 __IO uint32_t g_capture_value;
 
+char rx_buffer[RX_BUFFER_SIZE];
+uint8_t rx_index = 0;
+
 /*!
     \brief      this function handles NMI exception
     \param[in]  none
@@ -62,6 +66,7 @@ void NMI_Handler(void)
 void HardFault_Handler(void)
 {
     /* if Hard Fault exception occurs, go to infinite loop */
+    // log_error("HardFault_Handler");
     while(1) {
     }
 }
@@ -156,4 +161,24 @@ void EXTI0_1_IRQHandler(void) {
         timer_disable(TIMER16);
         exti_interrupt_disable(EXTI_0);
     }
+}
+
+void USART0_IRQHandler(void) {
+    if(RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE))
+    {
+        usart_interrupt_flag_clear(USART0, USART_INT_FLAG_RBNE);
+        uint8_t received_data = (uint8_t)usart_data_receive(USART0);
+
+        // 将接收到的数据存储到缓冲区
+        if(rx_index < RX_BUFFER_SIZE - 1) {
+            rx_buffer[rx_index++] = received_data;
+        }
+
+        // 检查是否接收到换行符，表示指令结束
+        if(received_data == '\n') {
+            rx_buffer[rx_index] = '\0'; // 添加字符串结束符
+            process_command(rx_buffer); // 处理指令
+            rx_index = 0; // 重置缓冲区索引
+        }
+    }
 }

src/ultrasonic_driver.c

@@ -57,6 +57,9 @@ void usart_config(void)
     usart_transmit_config(USART0_PHY, USART_TRANSMIT_ENABLE);
 
     usart_enable(USART0_PHY);
+
+    nvic_irq_enable(USART0_IRQn, 0);
+    usart_interrupt_enable(USART0_PHY, USART_INT_RBNE);
 }
 
 void UltraSonic_GPIO_Config(void)