Initial commit

2024-12-03 15:33:54 +08:00
commit ae92418e1e
70 changed files with 63204 additions and 0 deletions
--- a/sdk/GD32E23x_standard_peripheral/Src/gd32e23x_misc.c
+++ b/sdk/GD32E23x_standard_peripheral/Src/gd32e23x_misc.c
@@ -0,0 +1,141 @@
+/*!
+    \file    gd32e23x_misc.c
+    \brief   MISC driver
+    
+    \version 2024-02-22, V2.1.0, firmware for GD32E23x
+*/
+
+/*
+    Copyright (c) 2024, GigaDevice Semiconductor Inc.
+
+    Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    1. Redistributions of source code must retain the above copyright notice, this 
+       list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright notice, 
+       this list of conditions and the following disclaimer in the documentation 
+       and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holder nor the names of its contributors 
+       may be used to endorse or promote products derived from this software without 
+       specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+OF SUCH DAMAGE.
+*/
+
+#include "gd32e23x_misc.h"
+
+/*!
+    \brief      enable NVIC request
+    \param[in]  nvic_irq: the NVIC interrupt request, detailed in IRQn_Type
+    \param[in]  nvic_irq_priority: the priority needed to set (0-3)
+    \param[out] none
+    \retval     none
+*/
+void nvic_irq_enable(uint8_t nvic_irq, 
+                     uint8_t nvic_irq_priority)
+{
+    /* set the priority and enable the selected IRQ */
+    NVIC_SetPriority((IRQn_Type)nvic_irq, (uint32_t)nvic_irq_priority);
+    NVIC_EnableIRQ((IRQn_Type)nvic_irq);
+}
+
+/*!
+    \brief      disable NVIC request
+    \param[in]  nvic_irq: the NVIC interrupt request, detailed in IRQn_Type
+    \param[out] none
+    \retval     none
+*/
+void nvic_irq_disable(uint8_t nvic_irq)
+{
+    /* disable the selected IRQ.*/
+    NVIC_DisableIRQ((IRQn_Type)nvic_irq);
+}
+
+/*  */
+/*!
+    \brief      initiates a system reset request to reset the MCU
+    \param[in]  none
+    \param[out] none
+    \retval     none
+*/
+void nvic_system_reset(void)
+{
+    NVIC_SystemReset();
+}
+
+/*!
+    \brief      set the NVIC vector table base address
+    \param[in]  nvic_vict_tab: the RAM or FLASH base address
+      \arg        NVIC_VECTTAB_RAM: RAM base address
+      \arg        NVIC_VECTTAB_FLASH: Flash base address
+    \param[in]  offset: Vector Table offset
+    \param[out] none
+    \retval     none
+*/
+void nvic_vector_table_set(uint32_t nvic_vict_tab, uint32_t offset)
+{
+    SCB->VTOR = nvic_vict_tab | (offset & NVIC_VECTTAB_OFFSET_MASK);
+    __DSB();
+}
+
+/*!
+    \brief      set the state of the low power mode
+    \param[in]  lowpower_mode: the low power mode state
+      \arg        SCB_LPM_SLEEP_EXIT_ISR: if chose this para, the system always enter low power 
+                    mode by exiting from ISR
+      \arg        SCB_LPM_DEEPSLEEP: if chose this para, the system will enter the DEEPSLEEP mode
+      \arg        SCB_LPM_WAKE_BY_ALL_INT: if chose this para, the lowpower mode can be woke up 
+                    by all the enable and disable interrupts
+    \param[out] none
+    \retval     none
+*/
+void system_lowpower_set(uint8_t lowpower_mode)
+{
+    SCB->SCR |= (uint32_t)lowpower_mode;
+}
+
+/*!
+    \brief      reset the state of the low power mode
+    \param[in]  lowpower_mode: the low power mode state
+      \arg        SCB_LPM_SLEEP_EXIT_ISR: if chose this para, the system will exit low power 
+                    mode by exiting from ISR
+      \arg        SCB_LPM_DEEPSLEEP: if chose this para, the system will enter the SLEEP mode
+      \arg        SCB_LPM_WAKE_BY_ALL_INT: if chose this para, the lowpower mode only can be 
+                    woke up by the enable interrupts
+    \param[out] none
+    \retval     none
+*/
+void system_lowpower_reset(uint8_t lowpower_mode)
+{
+    SCB->SCR &= (~(uint32_t)lowpower_mode);
+}
+
+/*!
+    \brief      set the systick clock source
+    \param[in]  systick_clksource: the systick clock source needed to choose
+      \arg        SYSTICK_CLKSOURCE_HCLK: systick clock source is from HCLK
+      \arg        SYSTICK_CLKSOURCE_HCLK_DIV8: systick clock source is from HCLK/8
+    \param[out] none
+    \retval     none
+*/
+
+void systick_clksource_set(uint32_t systick_clksource)
+{
+    if(SYSTICK_CLKSOURCE_HCLK == systick_clksource ){
+        /* set the systick clock source from HCLK */
+        SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+    }else{
+        /* set the systick clock source from HCLK/8 */
+        SysTick->CTRL &= SYSTICK_CLKSOURCE_HCLK_DIV8;
+    }
+}