generated from hulk/gd32e23x_template
Initial commit
This commit is contained in:
251
sdk/GD32E23x_standard_peripheral/Src/gd32e23x_exti.c
Normal file
251
sdk/GD32E23x_standard_peripheral/Src/gd32e23x_exti.c
Normal file
@@ -0,0 +1,251 @@
|
||||
/*!
|
||||
\file gd32e23x_exti.c
|
||||
\brief EXTI driver
|
||||
|
||||
\version 2024-02-22, V2.1.0, firmware for GD32E23x
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright (c) 2024, GigaDevice Semiconductor Inc.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
1. Redistributions of source code must retain the above copyright notice, this
|
||||
list of conditions and the following disclaimer.
|
||||
2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
this list of conditions and the following disclaimer in the documentation
|
||||
and/or other materials provided with the distribution.
|
||||
3. Neither the name of the copyright holder nor the names of its contributors
|
||||
may be used to endorse or promote products derived from this software without
|
||||
specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
||||
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
||||
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
||||
OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include "gd32e23x_exti.h"
|
||||
|
||||
#define EXTI_INTEN_RESET_VAL ((uint32_t)0x0F900000U)
|
||||
#define EXTI_REG_RESET_VAL ((uint32_t)0x00000000U)
|
||||
|
||||
|
||||
/*!
|
||||
\brief reset the value of all EXTI registers with initial values
|
||||
\param[in] none
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_deinit(void)
|
||||
{
|
||||
/* reset the value of the EXTI registers */
|
||||
EXTI_INTEN = EXTI_INTEN_RESET_VAL;
|
||||
EXTI_EVEN = EXTI_REG_RESET_VAL;
|
||||
EXTI_RTEN = EXTI_REG_RESET_VAL;
|
||||
EXTI_FTEN = EXTI_REG_RESET_VAL;
|
||||
EXTI_SWIEV = EXTI_REG_RESET_VAL;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief initialize the EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[in] mode: interrupt or event mode, refer to exti_mode_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_INTERRUPT: interrupt mode
|
||||
\arg EXTI_EVENT: event mode
|
||||
\param[in] trig_type: interrupt trigger type, refer to exti_trig_type_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_TRIG_RISING: rising edge trigger
|
||||
\arg EXTI_TRIG_FALLING: falling trigger
|
||||
\arg EXTI_TRIG_BOTH: rising and falling trigger
|
||||
\arg EXTI_TRIG_NONE: without rising edge or falling edge trigger
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_init(exti_line_enum linex, exti_mode_enum mode, exti_trig_type_enum trig_type)
|
||||
{
|
||||
/* reset the EXTI line x */
|
||||
EXTI_INTEN &= ~(uint32_t)linex;
|
||||
EXTI_EVEN &= ~(uint32_t)linex;
|
||||
EXTI_RTEN &= ~(uint32_t)linex;
|
||||
EXTI_FTEN &= ~(uint32_t)linex;
|
||||
|
||||
/* set the EXTI mode and enable the interrupts or events from EXTI line x */
|
||||
switch(mode) {
|
||||
case EXTI_INTERRUPT:
|
||||
EXTI_INTEN |= (uint32_t)linex;
|
||||
break;
|
||||
case EXTI_EVENT:
|
||||
EXTI_EVEN |= (uint32_t)linex;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
/* set the EXTI trigger type */
|
||||
switch(trig_type) {
|
||||
case EXTI_TRIG_RISING:
|
||||
EXTI_RTEN |= (uint32_t)linex;
|
||||
EXTI_FTEN &= ~(uint32_t)linex;
|
||||
break;
|
||||
case EXTI_TRIG_FALLING:
|
||||
EXTI_RTEN &= ~(uint32_t)linex;
|
||||
EXTI_FTEN |= (uint32_t)linex;
|
||||
break;
|
||||
case EXTI_TRIG_BOTH:
|
||||
EXTI_RTEN |= (uint32_t)linex;
|
||||
EXTI_FTEN |= (uint32_t)linex;
|
||||
break;
|
||||
case EXTI_TRIG_NONE:
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief enable the interrupts from EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..27): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_interrupt_enable(exti_line_enum linex)
|
||||
{
|
||||
EXTI_INTEN |= (uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief disable the interrupts from EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..27): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_interrupt_disable(exti_line_enum linex)
|
||||
{
|
||||
EXTI_INTEN &= ~(uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief enable the events from EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..27): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_event_enable(exti_line_enum linex)
|
||||
{
|
||||
EXTI_EVEN |= (uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief disable the events from EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..27): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_event_disable(exti_line_enum linex)
|
||||
{
|
||||
EXTI_EVEN &= ~(uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief enable the software interrupt event from EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_software_interrupt_enable(exti_line_enum linex)
|
||||
{
|
||||
EXTI_SWIEV |= (uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief disable the software interrupt event from EXTI line x
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_software_interrupt_disable(exti_line_enum linex)
|
||||
{
|
||||
EXTI_SWIEV &= ~(uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief get EXTI line x interrupt pending flag
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[out] none
|
||||
\retval FlagStatus: status of flag (RESET or SET)
|
||||
*/
|
||||
FlagStatus exti_flag_get(exti_line_enum linex)
|
||||
{
|
||||
if(RESET != (EXTI_PD & (uint32_t)linex)) {
|
||||
return SET;
|
||||
} else {
|
||||
return RESET;
|
||||
}
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief clear EXTI line x interrupt pending flag
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_flag_clear(exti_line_enum linex)
|
||||
{
|
||||
EXTI_PD = (uint32_t)linex;
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief get EXTI line x interrupt pending flag
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[out] none
|
||||
\retval FlagStatus: status of flag (RESET or SET)
|
||||
*/
|
||||
FlagStatus exti_interrupt_flag_get(exti_line_enum linex)
|
||||
{
|
||||
if(RESET != (EXTI_PD & (uint32_t)linex)) {
|
||||
return SET;
|
||||
} else {
|
||||
return RESET;
|
||||
}
|
||||
}
|
||||
|
||||
/*!
|
||||
\brief clear EXTI line x interrupt pending flag
|
||||
\param[in] linex: EXTI line number, refer to exti_line_enum
|
||||
only one parameter can be selected which is shown as below:
|
||||
\arg EXTI_x (x=0..17,19,21): EXTI line x
|
||||
\param[out] none
|
||||
\retval none
|
||||
*/
|
||||
void exti_interrupt_flag_clear(exti_line_enum linex)
|
||||
{
|
||||
EXTI_PD = (uint32_t)linex;
|
||||
}
|
||||
Reference in New Issue
Block a user