hulk/ldc1612_cmake_vscode
1
0
Fork 0
generated from hulk/gd32e23x_template_cmake_vscode
Code Issues Pull Requests Actions Packages Projects Releases 3 Wiki Activity

release(golden): 托底线整体替换为生产实装版原样复制（v26.1.0.3）并重编 B 槽固件

Browse Source 
- 生产仓库（GitLab ceramixnano_eddy_cmake_vscode dev@151828f，已在机器上实装）原样复制 8 文件：Src/command.c、i2c.c、ldc1612.c、tmp112.c；Inc/command.h、i2c.h、ldc1612.h；CommunicationProtocol.md（copy 后 fc 逐字节核验一致）
- 保留 B 槽专属构建（LD 0x0800B000/0x4BF8、VTOR 0xB000、gap-fill 0xFF、BUILD_VARIANT=golden），仅 VERSION_PATCH 2→3 对齐生产
- 与 dev 线从此的功能差异属预期（勿"修复"）：LDC1612 驱动电流 GEN(8)（生产 2026-03-23 调参，dev 线仍 GEN(18)）、命令集 M1~M4+M999/M9999（无 M5/M6）、M4 无符号温度算法、旧 8 位寄存器地址 i2c 驱动（配套 tmp112/ldc1612 整组生效）；IIC 新驱动留待后续 A 线版本
- 保底判定值 v26.1.0.2 → v26.1.0.3；两个版本号均永不再用于 OTA 升级包；dev 线后续 A 版本必须 > V1.0.3（当前 dev 同为 V1.0.3，正式发布前须升版）
- 重编译：text+data = 12,036B；向量表校验通过（复位向量 0x0800CC2C 落 B 槽）
- FACTORY 工厂镜像（BL EDDY V0.1.0 + B 满槽 + flag，A 擦除态）已打包：Build\golden\CeramixNano-EDDY_FACTORY_B-V1.0.3_2026-10-25.bin，12 项字节校验全过
This commit is contained in:
hulk
2026-10-25 13:13:41 +08:00
parent 722b02e755
commit c7433a8df7
11 changed files with 321 additions and 560 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Src/i2c.c
+223 -396
View File
@@ -34,7 +34,6 @@ void i2c_gpio_config(void) {
i2c_result_t i2c_config(void) {
/* configure I2C GPIO */
i2c_gpio_config();
/* enable I2C clock */
rcu_periph_clock_enable(RCU_I2C);
/* configure I2C clock */
@@ -150,7 +149,7 @@ i2c_result_t i2c_bus_reset(void) {
}
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: bus recovered\r\n");
printf("I2C bus reset: bus recovered\r\n");
#endif
/* 8. Reconfigure & enable peripheral */
i2c_config();
@@ -198,12 +197,10 @@ void i2c_scan(void) {
i2c_master_addressing(I2C0, (address << 1), I2C_TRANSMITTER);
timeout = 0;
// 等待地址发送完成或错误
while (!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND) && !i2c_flag_get(I2C0, I2C_FLAG_AERR) && (timeout < I2C_TIME_OUT))
// 等待地址发送完成
while (!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout < I2C_TIME_OUT && i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) {
// 设备响应 - 清除地址标志
if (timeout < I2C_TIME_OUT) {
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
// printf("Found device at 0x%02X\r\n", address);
const char* msg2_prefix = "Found device at 0x";
@@ -224,9 +221,6 @@ void i2c_scan(void) {
}
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TC) == RESET) {}
found_devices++;
} else if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
// 设备无响应 - 清除错误标志
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
}
// 生成停止条件
@@ -269,53 +263,6 @@ void i2c_scan(void) {
}
}
/**
* @brief 内部辅助函数：等待指定的I2C标志位被设置，带有超时。
* @param[in] flag: 要等待的I2C事件标志。
* @retval i2c_result_t: I2C_RESULT_SUCCESS 或 I2C_RESULT_TIMEOUT。
*/
static i2c_result_t _i2c_wait_flag_timeout(uint32_t flag)
{
uint16_t timeout = 0;
while(!i2c_flag_get(I2C0, flag)){
if(timeout++ > I2C_TIME_OUT){
#ifdef DEBUG_VERBOSE
const char* fname = "UNKNOWN";
switch (flag) {
case I2C_FLAG_SBSEND: fname = "SBSEND"; break;
case I2C_FLAG_ADDSEND: fname = "ADDSEND"; break;
case I2C_FLAG_TBE: fname = "TBE"; break;
case I2C_FLAG_RBNE: fname = "RBNE"; break;
case I2C_FLAG_BTC: fname = "BTC"; break;
case I2C_FLAG_AERR: fname = "AERR"; break;
case I2C_FLAG_BERR: fname = "BERR"; break;
case I2C_FLAG_LOSTARB: fname = "LOSTARB"; break;
case I2C_FLAG_I2CBSY: fname = "I2CBSY"; break;
}
printf("I2C wait flag timeout: flag=0x%08X (%s)\r\n", (unsigned int)flag, fname);
#endif
return I2C_RESULT_TIMEOUT;
}
}
return I2C_RESULT_SUCCESS;
}
/**
* @brief 内部辅助函数：等待指定的I2C标志位被清除，带有超时。
* @param[in] flag: 要等待的I2C事件标志。
* @retval i2c_result_t: I2C_RESULT_SUCCESS 或 I2C_RESULT_TIMEOUT。
*/
static i2c_result_t _i2c_wait_flag_clear_timeout(uint32_t flag)
{
uint16_t timeout = 0;
while(i2c_flag_get(I2C0, flag)){
if(timeout++ > I2C_TIME_OUT){
return I2C_RESULT_TIMEOUT;
}
}
return I2C_RESULT_SUCCESS;
}
i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]) {
i2c_state_t state = I2C_STATE_START;
uint16_t timeout = 0;
@@ -378,7 +325,7 @@ i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data
} else {
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
timeout =0;
#ifdef DEBUG_VERBOSE
#ifdef DEBUG_VERBOES
printf("IIC write failed for Error Slave Address. \n");
#endif
return I2C_RESULT_NACK;
@@ -386,28 +333,39 @@ i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data
case I2C_STATE_TRANSMIT_REG:
/* wait until the transmit data buffer is empty */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register address */
i2c_data_transmit(I2C0, reg_addr);
timeout = 0;
state = I2C_STATE_TRANSMIT_DATA;
break;
case I2C_STATE_TRANSMIT_DATA:
/* wait until the transmit data buffer is empty */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register MSB value */
i2c_data_transmit(I2C0, data[0]);
timeout = 0;
/* wait until the transmit data buffer is empty */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -423,9 +381,13 @@ i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data
/* send register LSB value */
i2c_data_transmit(I2C0, data[1]);
timeout = 0;
/* wait until BTC bit is set */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
while (!i2c_flag_get(I2C0, I2C_FLAG_BTC) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -451,13 +413,25 @@ i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
/* I2C bus error, try to reset the bus and retry */
i2c_bus_reset();
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
timeout = 0;
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
return I2C_RESULT_ERROR;
}
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
i2c_flag_clear(I2C0, I2C_FLAG_BERR);
i2c_flag_clear(I2C0, I2C_FLAG_LOSTARB);
retry_count ++;
if (retry_count >= I2C_MAX_RETRY)
{
#ifdef DEBUG_VERBOSE
#ifdef DEBUG_VERBOES
printf("IIC write failed after %d retries\n", I2C_MAX_RETRY);
#endif
return I2C_RESULT_ERROR;
@@ -470,7 +444,7 @@ i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data
/* small delay before retry */
delay_10us(10);
break;
default:
state = I2C_STATE_START;
break;
@@ -498,8 +472,11 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
case I2C_STATE_START:
timeout = 0;
/* wait for bus to be idle */
if(_i2c_wait_flag_clear_timeout(I2C_FLAG_I2CBSY) != I2C_RESULT_SUCCESS) {
// wait for bus to be idle
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -507,11 +484,15 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
// send start condition
i2c_start_on_bus(I2C0);
state = I2C_STATE_SEND_ADDRESS;
timeout = 0;
break;
case I2C_STATE_SEND_ADDRESS:
/* wait for start condition to be sent */
if(_i2c_wait_flag_timeout(I2C_FLAG_SBSEND) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -559,7 +540,10 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
case I2C_STATE_TRANSMIT_DATA:
/* wait for transmit buffer to be empty */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -567,20 +551,28 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
/* send register address */
i2c_data_transmit(I2C0, reg_addr);
state = I2C_STATE_RESTART;
timeout = 0;
break;
case I2C_STATE_RESTART:
/* wait for byte transfer complete BTC: Bit Transfer Complete */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* generate repeated start condition */
i2c_start_on_bus(I2C0);
/* wait for repeated start condition to be sent */
if(_i2c_wait_flag_timeout(I2C_FLAG_SBSEND) != I2C_RESULT_SUCCESS) {
timeout = 0;
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -596,7 +588,10 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
case I2C_STATE_RECEIVE_DATA:
/* Wait for BTC (both bytes received) */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -626,13 +621,13 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
/* I2C bus error, try to reset the bus and retry */
i2c_bus_reset();
/* send stop condition to release bus */
i2c_stop_on_bus(I2C0);
retry_count++;
if (retry_count >= I2C_MAX_RETRY) {
#ifdef DEBUG_VERBOSE
printf("IIC read failed after %d retries\n", I2C_MAX_RETRY);
#ifdef DEBUG_VERBOES
printf("IIC read failed after %d retries\n", I2C_RETRY_MAX);
#endif
return I2C_RESULT_ERROR;
}
@@ -657,13 +652,13 @@ i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data
/*!
\brief write data to I2C device with configurable length
\param[in] slave_addr: slave device address (7-bit)
\param[in] reg_addr: register address (16-bit, high byte first)
\param[in] reg_addr: register address
\param[in] data: pointer to data buffer
\param[in] length: number of bytes to write (1-255)
\param[out] none
\retval i2c_result_t: operation result
*/
i2c_result_t i2c_write(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint8_t length) {
i2c_result_t i2c_write(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data, uint8_t length) {
i2c_state_t state = I2C_STATE_START;
uint16_t timeout = 0;
uint8_t retry_count = 0;
@@ -671,9 +666,6 @@ i2c_result_t i2c_write(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uin
/* parameter validation */
if (data == NULL || slave_addr > 0x7F || length == 0) {
#ifdef DEBUG_VERBOSE
printf("I2C write invalid param: slave=0x%02X, len=%u, data=%p\r\n", slave_addr, length, data);
#endif
return I2C_RESULT_INVALID_PARAM;
}
@@ -727,71 +719,67 @@ i2c_result_t i2c_write(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uin
state = I2C_STATE_TRANSMIT_REG;
break;
} else {
/* NACK received - address not acknowledged */
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
i2c_stop_on_bus(I2C0);
timeout = 0;
#ifdef DEBUG_VERBOSE
printf("I2C write failed for Error Slave Address. \n");
printf("IIC write failed for Error Slave Address. \n");
#endif
return I2C_RESULT_NACK;
}
case I2C_STATE_TRANSMIT_REG:
/* wait until the transmit data buffer is empty */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register address, high byte first */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_data_transmit(I2C0, (uint8_t)(reg_addr >> 8));
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_data_transmit(I2C0, (uint8_t)(reg_addr & 0xFF));
/* send register address */
i2c_data_transmit(I2C0, reg_addr);
timeout = 0;
state = I2C_STATE_TRANSMIT_DATA;
break;
case I2C_STATE_TRANSMIT_DATA:
/* wait until the transmit data buffer is empty */
while (data_index < length) {
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
/* send data byte */
i2c_data_transmit(I2C0, data[data_index]);
data_index++;
/* check for errors */
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
i2c_stop_on_bus(I2C0);
return I2C_RESULT_NACK;
} else if (i2c_flag_get(I2C0, I2C_FLAG_BERR) || i2c_flag_get(I2C0, I2C_FLAG_LOSTARB)) {
i2c_stop_on_bus(I2C0);
return I2C_RESULT_ERROR;
}
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
if(state == I2C_STATE_ERROR) break;
/* send data byte */
i2c_data_transmit(I2C0, data[data_index]);
data_index++;
/* check for errors */
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
i2c_stop_on_bus(I2C0);
return I2C_RESULT_NACK;
} else if (i2c_flag_get(I2C0, I2C_FLAG_BERR) || i2c_flag_get(I2C0, I2C_FLAG_LOSTARB)) {
i2c_stop_on_bus(I2C0);
return I2C_RESULT_ERROR;
}
/* check if all data has been sent */
if (data_index >= length) {
/* wait until BTC bit is set for last byte */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
timeout = 0;
while (!i2c_flag_get(I2C0, I2C_FLAG_BTC) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
state = I2C_STATE_STOP;
}
timeout = 0;
break;
case I2C_STATE_STOP:
@@ -811,8 +799,17 @@ i2c_result_t i2c_write(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uin
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
/* I2C bus error, try to reset the bus and retry */
i2c_bus_reset();
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
timeout = 0;
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
i2c_flag_clear(I2C0, I2C_FLAG_BERR);
i2c_flag_clear(I2C0, I2C_FLAG_LOSTARB);
retry_count++;
if (retry_count >= I2C_MAX_RETRY) {
@@ -829,7 +826,7 @@ i2c_result_t i2c_write(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uin
/* small delay before retry */
delay_10us(10);
break;
default:
state = I2C_STATE_START;
break;
@@ -841,12 +838,12 @@ i2c_result_t i2c_write(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uin
/*!
\brief read data from I2C device with configurable length
\param[in] slave_addr: slave device address (7-bit)
\param[in] reg_addr: register address (16-bit, high byte first)
\param[in] reg_addr: register address
\param[out] data: pointer to data buffer
\param[in] length: number of bytes to read (1-255)
\retval i2c_result_t: operation result
*/
i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint8_t length) {
i2c_result_t i2c_read(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data, uint8_t length) {
i2c_state_t state = I2C_STATE_START;
uint16_t timeout = 0;
uint8_t retry_count = 0;
@@ -861,10 +858,6 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
/* enable acknowledge */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
#ifdef DEBUG_VERBOSE
printf("I2C read start: slave=0x%02X reg=0x%02X len=%u\r\n", slave_addr, reg_addr, length);
#endif
while (retry_count < (uint8_t)I2C_MAX_RETRY) {
switch (state) {
case I2C_STATE_START:
@@ -872,7 +865,10 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
data_index = 0;
/* wait for bus to be idle */
if(_i2c_wait_flag_clear_timeout(I2C_FLAG_I2CBSY) != I2C_RESULT_SUCCESS) {
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -880,11 +876,15 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
/* send start condition */
i2c_start_on_bus(I2C0);
state = I2C_STATE_SEND_ADDRESS;
timeout = 0;
break;
case I2C_STATE_SEND_ADDRESS:
/* wait for start condition to be sent */
if(_i2c_wait_flag_timeout(I2C_FLAG_SBSEND) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -912,92 +912,67 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
break;
}
/* debug: show address ack and error flags */
#ifdef DEBUG_VERBOSE
printf("I2C CLEAR_ADDRESS: write_phase=%d ADDSEND=%d AERR=%d\r\n",
(int)write_phase,
(int)i2c_flag_get(I2C0, I2C_FLAG_ADDSEND),
(int)i2c_flag_get(I2C0, I2C_FLAG_AERR));
#endif
if (write_phase) {
/* clear address flag (write phase) */
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
state = I2C_STATE_TRANSMIT_DATA;
} else {
/* READ phase: handle ACK/ACKPOS based on requested length
- length == 1: disable ACK before clearing ADDR
- length == 2: set ACKPOS_NEXT and disable ACK before clearing ADDR
- length > 2: keep ACK enabled and clear ADDR; we'll handle N-2/BTF sequence later */
/* read phase setup based on length */
if (length == 1) {
/* single byte read: disable ACK before clearing ADDR */
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
#ifdef DEBUG_VERBOSE
printf("I2C READ phase: length=1, disabling ACK before clearing ADDSEND\r\n");
#endif
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
/* send STOP immediately after clearing ADDR for single byte */
i2c_stop_on_bus(I2C0);
} else if (length == 2) {
/* two bytes read: set POS=NEXT and disable ACK before clearing ADDR */
i2c_ackpos_config(I2C0, I2C_ACKPOS_NEXT);
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
#ifdef DEBUG_VERBOSE
printf("I2C READ phase: length=2, set ACKPOS_NEXT and disabling ACK before clearing ADDSEND\r\n");
#endif
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
} else {
/* length > 2: keep ACK enabled so slave will clock out data */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
#ifdef DEBUG_VERBOSE
printf("I2C READ phase: length=%u (>2), keeping ACK enabled\r\n", length);
#endif
/* multi-byte read: clear ADDR with ACK enabled */
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
}
/* now clear address flag to release SCL and enter data phase */
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
state = I2C_STATE_RECEIVE_DATA;
}
timeout = 0;
break;
case I2C_STATE_TRANSMIT_DATA:
/* wait for transmit buffer to be empty */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register address, high byte first */
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_data_transmit(I2C0, (uint8_t)(reg_addr >> 8));
if(_i2c_wait_flag_timeout(I2C_FLAG_TBE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_data_transmit(I2C0, (uint8_t)(reg_addr & 0xFF));
/* send register address */
i2c_data_transmit(I2C0, reg_addr);
state = I2C_STATE_RESTART;
timeout = 0;
break;
case I2C_STATE_RESTART:
/* wait for byte transfer complete */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
#ifdef DEBUG_VERBOSE
printf("I2C RESTART: after BTC, delay 5ms and issuing repeated START\r\n");
#endif
/* small delay to allow slave device to prepare multi-byte data before repeated start */
/* increased to 5ms to improve reliability for DLPC multi-byte reads */
delay_ms(5);
/* generate repeated start condition */
i2c_start_on_bus(I2C0);
/* wait for repeated start condition to be sent */
if(_i2c_wait_flag_timeout(I2C_FLAG_SBSEND) != I2C_RESULT_SUCCESS) {
timeout = 0;
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -1009,18 +984,15 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
write_phase = false;
state = I2C_STATE_CLEAR_ADDRESS;
timeout = 0;
#ifdef DEBUG_VERBOSE
printf("I2C addressing sent for read (slave=0x%02X)\r\n", slave_addr);
#endif
break;
case I2C_STATE_RECEIVE_DATA:
#ifdef DEBUG_VERBOSE
printf("I2C RECEIVE_DATA: expecting %u bytes\r\n", length);
#endif
if (length == 1) {
/* single byte read */
if(_i2c_wait_flag_timeout(I2C_FLAG_RBNE) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_RBNE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -1028,7 +1000,10 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
state = I2C_STATE_STOP;
} else if (length == 2) {
/* two bytes read */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
@@ -1041,39 +1016,40 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
} else {
/* multi-byte read (length > 2) */
while (data_index < length) {
if (data_index < length - 2) {
/* normal bytes: wait for RBNE and read with ACK */
if(_i2c_wait_flag_timeout(I2C_FLAG_RBNE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
data[data_index] = i2c_data_receive(I2C0);
data_index++;
} else if (data_index == length - 2) {
/* second to last byte: wait for BTF, then disable ACK and read */
if(_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
/* disable ACK before reading N-1 byte */
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
/* send STOP before reading N-1 byte */
i2c_stop_on_bus(I2C0);
/* read N-1 byte */
data[data_index] = i2c_data_receive(I2C0);
data_index++;
} else {
/* last byte: wait for RBNE and read */
if(_i2c_wait_flag_timeout(I2C_FLAG_RBNE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
/* read last byte */
data[data_index] = i2c_data_receive(I2C0);
data_index++;
/* wait for RBNE (receive buffer not empty) */
while ((!i2c_flag_get(I2C0, I2C_FLAG_RBNE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* special handling for last 3 bytes */
if (data_index == length - 3) {
/* wait for BTF (byte transfer finished) before reading N-2 */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* disable ACK for last 2 bytes */
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
}
/* read data byte */
data[data_index] = i2c_data_receive(I2C0);
data_index++;
/* send STOP after reading N-1 byte */
if (data_index == length - 1) {
i2c_stop_on_bus(I2C0);
}
timeout = 0;
}
if(state == I2C_STATE_ERROR) break;
state = I2C_STATE_STOP;
}
break;
@@ -1096,11 +1072,8 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
/* I2C bus error, try to reset the bus and retry */
#ifdef DEBUG_VERBOSE
printf("I2C_STATE_ERROR: resetting bus and retrying (retry_count=%u)\r\n", retry_count);
#endif
i2c_bus_reset();
/* send stop condition to release bus */
i2c_stop_on_bus(I2C0);
/* reset ACK configuration */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
@@ -1109,13 +1082,7 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
retry_count++;
if (retry_count >= I2C_MAX_RETRY) {
#ifdef DEBUG_VERBOSE
/* Print diagnostic flags to help root-cause analysis */
printf("I2C read final failure after %d retries, last_state=%d\r\n", I2C_MAX_RETRY, state);
printf(" FLAGS: AERR=%d BERR=%d LOSTARB=%d I2CBSY=%d\r\n",
(int)i2c_flag_get(I2C0, I2C_FLAG_AERR),
(int)i2c_flag_get(I2C0, I2C_FLAG_BERR),
(int)i2c_flag_get(I2C0, I2C_FLAG_LOSTARB),
(int)i2c_flag_get(I2C0, I2C_FLAG_I2CBSY));
printf("I2C read failed after %d retries\n", I2C_MAX_RETRY);
#endif
return I2C_RESULT_ERROR;
}
@@ -1134,179 +1101,39 @@ i2c_result_t i2c_read(uint8_t slave_addr, uint16_t reg_addr, uint8_t *data, uint
break;
}
}
/* timeout path: provide debug info */
#ifdef DEBUG_VERBOSE
printf("I2C read timeout (end state). slave=0x%02X, len=%u\r\n", slave_addr, length);
printf(" FLAGS: AERR=%d BERR=%d LOSTARB=%d I2CBSY=%d\r\n",
(int)i2c_flag_get(I2C0, I2C_FLAG_AERR),
(int)i2c_flag_get(I2C0, I2C_FLAG_BERR),
(int)i2c_flag_get(I2C0, I2C_FLAG_LOSTARB),
(int)i2c_flag_get(I2C0, I2C_FLAG_I2CBSY));
#endif
return I2C_RESULT_TIMEOUT;
}
/*!
\brief read data from I2C device without register/sub-address phase
\param[in] slave_addr: slave device address (7-bit)
\param[out] data: pointer to data buffer
\param[in] length: number of bytes to read (1-255)
\retval i2c_result_t: operation result
*/
i2c_result_t i2c_read_raw(uint8_t slave_addr, uint8_t *data, uint8_t length)
{
i2c_state_t state = I2C_STATE_START;
uint16_t timeout = 0;
uint8_t retry_count = 0;
uint8_t data_index = 0;
/* convenience functions for common operations */
i2c_result_t i2c_write_8bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data) {
return i2c_write(slave_addr, reg_addr, &data, 1);
}
if (data == NULL || slave_addr > 0x7F || length == 0) {
i2c_result_t i2c_read_8bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data) {
return i2c_read(slave_addr, reg_addr, data, 1);
}
i2c_result_t i2c_write_32bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[4]) {
return i2c_write(slave_addr, reg_addr, data, 4);
}
i2c_result_t i2c_read_32bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data) {
return i2c_read(slave_addr, reg_addr, data, 4);
}
/* 显示面板专用函数 - 支持读取显示界面参数 */
i2c_result_t i2c_read_display_params(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data, uint8_t length) {
/* 针对显示面板的多字节读取，支持13字节的完整参数读取 */
if (length > 13) {
return I2C_RESULT_INVALID_PARAM;
}
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
while (retry_count < (uint8_t)I2C_MAX_RETRY) {
switch (state) {
case I2C_STATE_START:
timeout = 0;
data_index = 0;
if (_i2c_wait_flag_clear_timeout(I2C_FLAG_I2CBSY) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_start_on_bus(I2C0);
state = I2C_STATE_SEND_ADDRESS;
break;
case I2C_STATE_SEND_ADDRESS:
if (_i2c_wait_flag_timeout(I2C_FLAG_SBSEND) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_master_addressing(I2C0, (slave_addr << 1), I2C_RECEIVER);
state = I2C_STATE_CLEAR_ADDRESS;
timeout = 0;
break;
case I2C_STATE_CLEAR_ADDRESS:
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (!i2c_flag_get(I2C0, I2C_FLAG_AERR)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
i2c_stop_on_bus(I2C0);
return I2C_RESULT_NACK;
}
if (length == 1) {
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
} else if (length == 2) {
i2c_ackpos_config(I2C0, I2C_ACKPOS_NEXT);
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
} else {
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
}
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
state = I2C_STATE_RECEIVE_DATA;
timeout = 0;
break;
case I2C_STATE_RECEIVE_DATA:
if (length == 1) {
if (_i2c_wait_flag_timeout(I2C_FLAG_RBNE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
data[0] = i2c_data_receive(I2C0);
state = I2C_STATE_STOP;
} else if (length == 2) {
if (_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_stop_on_bus(I2C0);
data[0] = i2c_data_receive(I2C0);
data[1] = i2c_data_receive(I2C0);
state = I2C_STATE_STOP;
} else {
while (data_index < length) {
if (data_index < length - 2) {
if (_i2c_wait_flag_timeout(I2C_FLAG_RBNE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
data[data_index++] = i2c_data_receive(I2C0);
} else if (data_index == length - 2) {
if (_i2c_wait_flag_timeout(I2C_FLAG_BTC) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
i2c_stop_on_bus(I2C0);
data[data_index++] = i2c_data_receive(I2C0);
} else {
if (_i2c_wait_flag_timeout(I2C_FLAG_RBNE) != I2C_RESULT_SUCCESS) {
state = I2C_STATE_ERROR;
break;
}
data[data_index++] = i2c_data_receive(I2C0);
}
}
if (state == I2C_STATE_ERROR) break;
state = I2C_STATE_STOP;
}
break;
case I2C_STATE_STOP:
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
i2c_ackpos_config(I2C0, I2C_ACKPOS_CURRENT);
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
i2c_bus_reset();
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
i2c_ackpos_config(I2C0, I2C_ACKPOS_CURRENT);
retry_count++;
if (retry_count >= I2C_MAX_RETRY) {
return I2C_RESULT_ERROR;
}
state = I2C_STATE_START;
timeout = 0;
delay_10us(10);
break;
default:
state = I2C_STATE_START;
break;
}
}
return I2C_RESULT_TIMEOUT;
return i2c_read(slave_addr, reg_addr, data, length);
}
#ifdef DEBUG_VERBOSE
/*!
\brief get status string for debugging
\param[in] status: i2c_result_t value
\param[in] status: i2c_status_t value
\param[out] none
\retval const char* status string
*/