hulk/gd32e23x_template_cmake_vscode
Template
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

commit

Browse Source
This commit is contained in:
yelvlab
2025-08-19 22:46:27 +08:00
parent 9e6333dca8
commit 552984ef2a
20 changed files with 1995 additions and 182 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
.vscode/settings.json vendored
View File

@@ -4,6 +4,10 @@
"Git Bash": {
"path": "C:\\Program Files\\Git\\bin\\bash.exe",
"icon": "terminal-bash"
},
"Git-Bash": {
"path": "D:\\Git\\bin\\bash.exe",
"icon": "terminal-bash"
}
},
"terminal.integrated.defaultProfile.windows": "Git-Bash",
@@ -15,6 +19,12 @@
"vcpkg.storageLocation": "C:\\Dev\\Tools\\vcpkg",
"files.associations": {
"*.h": "c",
"*.c": "c"
"*.c": "c",
"array": "c",
"string": "c",
"string_view": "c",
"ranges": "c",
"span": "c"
},
"cortex-debug.variableUseNaturalFormat": true,
}

22
.vscode/tasks.json vendored
View File

@@ -11,7 +11,11 @@
"Build",
"Flash MCU"
],
"dependsOrder": "sequence"
"dependsOrder": "sequence",
"icon": {
"id": "insert",
"tooltip": "Build and Flash"
}
},
{
"label": "Flash MCU",
@@ -31,6 +35,10 @@
},
"presentation": {
"clear": true
},
"icon": {
"id": "gather",
"tooltip": "Flash MCU"
}
},
{
@@ -51,6 +59,10 @@
},
"presentation": {
"clear": true
},
"icon": {
"id": "discard",
"tooltip": "Reset MCU"
}
},
{
@@ -71,6 +83,10 @@
},
"presentation": {
"clear": true
},
"icon": {
"id": "clear-all",
"tooltip": "Erase MCU"
}
},
{
@@ -119,6 +135,10 @@
},
"presentation": {
"clear": true
},
"icon": {
"id": "code",
"tooltip": "Build"
}
}
]

3
CMakeLists.txt
View File

@@ -27,6 +27,9 @@ set(TARGET_SRC
# Add new source files here
Src/uart.c
Src/led.c
Src/uart_ring_buffer.c
Src/command.c
Src/i2c.c
)
# 设置输出目录

1
CMakePresets.json
View File

@@ -12,6 +12,7 @@
"type": "FILEPATH",
"value": "${sourceDir}/cmake/arm-none-eabi-gcc.cmake"
}
,"CMAKE_EXPORT_COMPILE_COMMANDS": "ON"
},
"architecture": {
"value": "unspecified",

44
Inc/board_config.h
View File

@@ -1,6 +1,38 @@
#ifndef BOARD_CONFIG_H
#define BOARD_CONFIG_H
/* >>>>>>>>>>>>>>>>>>>>[RS485 PHY DEFINE]<<<<<<<<<<<<<<<<<<<< */
// #define RS485_MAX13487 // RS485 PHY : MAX13487 (AutoDir)
#undef RS485_MAX13487 // RS485 PHY : SP3487 (no AutoDir)
/* >>>>>>>>>>>>>>>>>>>>[IIC TYPE DEFINE]<<<<<<<<<<<<<<<<<<<< */
// #define SOFTWARE_IIC // IIC Type : Software IIC
#undef SOFTWARE_IIC // IIC Type : Hardware IIC
/* >>>>>>>>>>>>>>>>>>>>[DEBUG ASSERTIONS DEFINE]<<<<<<<<<<<<<<<<<<<< */
// #define DEBUG_VERBOSE // Debug Assertions Status : Debug Verbose Information
#undef DEBUG_VERBOSE // Debug Assertions Status : No Debug Verbose Information
/* >>>>>>>>>>>>>>>>>>>>[EDDY DRIVE CURRENT DETECTION]<<<<<<<<<<<<<<<<<<<< */
// #define EDDY_DRIVE_CURRENT_DETECTION // Eddy Drive Current Detection : Enable
#undef EDDY_DRIVE_CURRENT_DETECTION // Eddy Drive Current Detection : Disable
/******************************************************************************/
#define RCU_GPIO_I2C RCU_GPIOF
#define RCU_I2C RCU_I2C0
#define I2C_SCL_PORT GPIOF
#define I2C_SCL_PIN GPIO_PIN_1
#define I2C_SDA_PORT GPIOF
#define I2C_SDA_PIN GPIO_PIN_0
#define I2C_GPIO_AF GPIO_AF_1
#define I2C_DEBUG_UART USART0
/******************************************************************************/
#define LED_PORT GPIOA
@@ -9,4 +41,16 @@
/******************************************************************************/
#define RS485_RCU RCU_USART0
#define RS485_GPIO_RCU RCU_GPIOA
#define RS485_GPIO_PORT GPIOA
#define RS485_TX_PIN GPIO_PIN_2
#define RS485_RX_PIN GPIO_PIN_3
#define RS485_PHY USART0
#define RS485_BAUDRATE 115200U
#define RS485_EN_PIN GPIO_PIN_1
#define RS485_IRQ USART0_IRQn
/******************************************************************************/
#endif //BOARD_CONFIG_H

128
Inc/command.h Normal file
View File

@@ -0,0 +1,128 @@
/**
* @file command.h
* @brief 串口命令解析与处理模块接口声明。
* @details 提供基于环形缓冲区的串口协议解析、命令处理及状态管理功能，
* 支持格式为 D5 03 LEN [cmd] CRC 的命令帧解析与响应。
*/
#ifndef COMMAND_H
#define COMMAND_H
#include <stdint.h>
#include <stdbool.h>
/**
* @defgroup Command 命令处理模块
* @brief 串口命令解析与处理
* @{
*/
/** @brief 传感器周期上报使能标志 */
extern volatile bool g_eddy_current_sensor_report_enabled;
extern volatile bool g_temperature_sensor_report_enabled;
/**
* @section Command_Protocol 协议格式
* 接收命令帧格式：
* @code
* [0] HEADER = 0xD5 // 包头标识
* [1] BOARD_TYPE = 0x03 // 板卡类型标识
* [2] LEN = 数据区字节数 // 有效载荷长度
* [3..(3+LEN-1)] 数据 // 命令数据
* [last] CRC // 校验码（从索引1累加到len-2的低8位）
* @endcode
*
* 响应帧格式：
* @code
* [0] HEADER = 0xB5 // 响应包头
* [1] TYPE // 响应类型（0xF0=成功，0xF1..=错误类型）
* [2] LEN // 响应数据长度
* [3..(3+LEN-1)] 数据 // 响应数据
* [last] CRC // 校验码
* @endcode
*
* @section Command_Usage 使用说明
* 1) 初始化环形缓冲区：
* @code{.c}
* uart_ring_buffer_init();
* @endcode
*
* 2) 在主循环中调用命令处理：
* @code{.c}
* while(1) {
* command_process(); // 处理接收到的命令
* // 其他业务逻辑
* }
* @endcode
*
* 3) 查询传感器上报状态：
* @code{.c}
* if(get_sensor_report_enabled()) {
* // 执行传感器数据上报
* }
* @endcode
*/
/**
* @brief 获取电涡流传感器周期上报使能状态。
* @return bool 上报状态。
* @retval true 传感器周期上报已启用。
* @retval false 传感器周期上报已禁用。
* @ingroup Command
*/
bool get_eddy_sensor_report_enabled(void);
/**
* @brief 设置电涡流传感器周期上报使能状态。
* @param enabled 上报使能标志。
* @arg true 启用传感器周期上报。
* @arg false 禁用传感器周期上报。
* @note 推荐通过此函数修改状态，便于后续功能扩展。
* @ingroup Command
*/
void set_eddy_sensor_report_status(bool enabled);
/**
* @brief 获取温度传感器周期上报使能状态。
* @return bool 上报状态。
* @retval true 传感器周期上报已启用。
* @retval false 传感器周期上报已禁用。
* @ingroup Command
*/
bool get_temp_sensor_report_enabled(void);
/**
* @brief 设置温度传感器周期上报使能状态。
* @param enabled 上报使能标志。
* @arg true 启用传感器周期上报。
* @arg false 禁用传感器周期上报。
* @note 推荐通过此函数修改状态，便于后续功能扩展。
* @ingroup Command
*/
void set_temp_sensor_report_status(bool enabled);
/**
* @brief 处理串口环形缓冲区中的命令数据。
* @details 基于状态机的非阻塞协议解析器，处理完整的命令帧并自动响应。
* 每次调用处理缓冲区中所有可用数据，遇到错误时自动重置状态机。
* @note 使用静态变量维护解析状态，函数不可重入。
* @warning 依赖环形缓冲区正确实现，建议在主循环中周期调用。
* @ingroup Command
*/
void command_process(void);
/**
* @brief 解析并处理完整的命令帧。
* @param cmd 指向完整命令帧的缓冲区（从包头0xD5开始）。
* @param len 命令帧总长度（字节）。
* @note 内部函数，由 command_process() 调用，一般不直接使用。
* @ingroup Command
*/
void handle_command(const uint8_t *cmd, uint8_t len);
/** @} */ // end of Command group
void eddy_current_report(void);
void temperature_raw_value_report(void);
#endif // COMMAND_H

127
Inc/i2c.h Normal file
View File

@@ -0,0 +1,127 @@
//
// Created by dell on 24-12-20.
//
#ifndef I2C_H
#define I2C_H
#include "gd32e23x_it.h"
#include "gd32e23x.h"
#include "systick.h"
#include <stdbool.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include "board_config.h"
/******************************************************************************/
#define I2C_SPEED 100000U /* 100kHz */
#define I2C_TIME_OUT 5000U /* 5000 loops timeout */
#define I2C_MAX_RETRY 3U /* Maximum retry attempts */
#define I2C_DELAY_10US 10U /* Delay in microseconds for bus reset */
#define I2C_RECOVERY_CLOCKS 9U /* Clock pulses for bus recovery */
#define I2C_MASTER_ADDRESS 0x00U /* Master address (not used) */
/* Legacy compatibility */
#define I2C_OK 1
#define I2C_FAIL 0
#define I2C_END 1
/******************************************************************************/
/* I2C result enumeration */
typedef enum {
I2C_RESULT_SUCCESS = 0, /* Operation successful */
I2C_RESULT_TIMEOUT, /* Timeout occurred */
I2C_RESULT_NACK, /* No acknowledge received */
I2C_RESULT_BUS_BUSY, /* Bus is busy */
I2C_RESULT_ERROR, /* General error */
I2C_RESULT_INVALID_PARAM, /* Invalid parameter */
I2C_RECOVERY_OK,
I2C_RECOVERY_SDA_STUCK_LOW,
I2C_RECOVERY_SCL_STUCK_LOW
} i2c_result_t;
/* I2C state machine enumeration */
typedef enum {
I2C_STATE_IDLE = 0, /* Idle state */
I2C_STATE_START, /* Generate start condition */
I2C_STATE_SEND_ADDRESS, /* Send slave address */
I2C_STATE_CLEAR_ADDRESS, /* Clear address flag */
I2C_STATE_TRANSMIT_REG, /* Transmit register address */
I2C_STATE_TRANSMIT_DATA, /* Transmit data */
I2C_STATE_RESTART, /* Generate restart condition */
I2C_STATE_RECEIVE_DATA, /* Receive data */
I2C_STATE_STOP, /* Generate stop condition */
I2C_STATE_ERROR, /* Error state */
I2C_STATE_END
} i2c_state_t;
/******************************************************************************/
/* Function declarations */
/*!
\brief configure the I2C interface
\param[in] none
\param[out] none
\retval i2c_result_t
*/
i2c_result_t i2c_config(void);
/*!
\brief reset I2C bus with proper recovery
\param[in] none
\param[out] none
\retval i2c_result_t
*/
i2c_result_t i2c_bus_reset(void);
/*!
\brief scan I2C bus for devices
\param[in] none
\param[out] none
\retval none
*/
void i2c_scan(void);
/*!
\brief write 16-bit data to I2C device
\param[in] slave_addr: 7-bit slave address
\param[in] reg_addr: register address
\param[in] data: pointer to 2-byte data array
\param[out] none
\retval i2c_result_t
*/
i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]);
/*!
\brief read 16-bit data from I2C device
\param[in] slave_addr: 7-bit slave address
\param[in] reg_addr: register address
\param[out] data: pointer to 2-byte data buffer
\retval i2c_result_t
*/
i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data);
/*!
\brief read 16-bit data from I2C device
\param[in] slave_addr: 7-bit slave address
\param[in] reg_addr: register address
\param[out] data: pointer to 2-byte data buffer
\retval i2c_result_t
*/
i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data);
/*!
\brief get status string for debugging
\param[in] status: i2c_result_t value
\param[out] none
\retval const char* status string
*/
const char* i2c_get_status_string(i2c_result_t status);
#endif //I2C_H

1
Inc/led.h
View File

@@ -8,5 +8,6 @@ void led_init(void);
void led_on(void);
void led_off(void);
void led_toggle(void);
void led_heart_beat(void);
#endif // LED_H

61
Inc/systick.h
View File

@@ -1,47 +1,36 @@
/*!
\file systick.h
\brief the header file of systick
\version 2025-02-10, V2.4.0, demo for GD32E23x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
/**
* ************************************************************************
*
* @file systick.h
* @author GD32
* @brief
*
* ************************************************************************
* @copyright Copyright (c) 2024 GD32
* ************************************************************************
*/
#ifndef SYS_TICK_H
#define SYS_TICK_H
#include <stdint.h>
/* function declarations */
/* configure systick */
void systick_config(void);
/* delay a time in 10 microseconds */
void delay_10us(uint32_t count);
/* delay a time in milliseconds */
void delay_ms(uint32_t count);
/* delay decrement */
/* decrement delay counters */
void delay_decrement(void);
#endif /* SYS_TICK_H */
// /* delay function that doesn't interfere with SysTick interrupt */
// void delay_ms_safe(uint32_t count);
// /* delay a time in microseconds (safe version) */
// void delay_us_safe(uint32_t count);
#endif /* SYS_TICK_H */

10
Inc/uart.h
View File

@@ -3,14 +3,6 @@
#include "gd32e23x.h"
typedef enum {
UART_PRINTF_USART0 = 0,
UART_PRINTF_USART1 = 1,
UART_PRINTF_BOTH = 2
} uart_printf_port_t;
void uart0_init(uint32_t baudrate);
void uart1_init(uint32_t baudrate);
void uart_set_printf_port(uart_printf_port_t port);
void rs485_init(void);
#endif // UART_H

119
Inc/uart_ring_buffer.h Normal file
View File

@@ -0,0 +1,119 @@
/**
* @file uart_ring_buffer.h
* @brief 简单高效的环形接收缓冲区（字节队列）接口声明。
* @details 提供字节写入/读取、可读长度查询、清空与丢弃统计等 API，
* 适用于中断接收（写）与主循环解析（读）的典型嵌入式串口场景。
*/
#ifndef UART_RING_BUFFER_H
#define UART_RING_BUFFER_H
#include <stdint.h>
#include <stdbool.h>
/**
* @def UART_RX_BUFFER_SIZE
* @brief 接收环形缓冲区容量（单位：字节）。
* @note 采用“预留一格”区分空/满策略，最大可用容量为 UART_RX_BUFFER_SIZE-1。
*/
#define UART_RX_BUFFER_SIZE 64
/**
* @defgroup RingBuffer 环形缓冲区
* @brief 字节环形缓冲区（接收端）
* @{
*/
/**
* @section RingBuffer_Usage 使用说明
* 典型用法：中断接收（写入环形缓冲）、主循环解析（读取环形缓冲）。
*
* 1) 初始化
* @code{.c}
* uart_ring_buffer_init();
* @endcode
*
* 2) 使能串口接收非空中断（RBNE）并开启中断（以 USART0 为例）
* @code{.c}
* usart_interrupt_enable(USART0, USART_INT_RBNE);
* nvic_irq_enable(USART0_IRQn, 2, 0); // 根据工程需要设置优先级
* @endcode
*
* 3) 在中断服务函数中写入环形缓冲（参考你当前工程的写法）
* @code{.c}
* void USART0_IRQHandler(void) {
* if (RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE)) {
* uint8_t data = usart_data_receive(USART0);
* (void)uart_ring_buffer_put(data); // 缓冲满时丢弃并计数
* }
* }
* @endcode
*
* 4) 在主循环中读取处理
* @code{.c}
* while (uart_ring_buffer_available() > 0) {
* int b = uart_ring_buffer_get();
* if (b >= 0) {
* // 处理字节 b
* }
* }
* @endcode
*
* @note 缓冲区满时新字节会被丢弃，可用 uart_ring_buffer_drop_count() 查看累计丢弃数。
* @note 采用“预留一格”区分空/满，最大可用容量为 UART_RX_BUFFER_SIZE-1。
*/
/**
* @brief 初始化环形缓冲区。
* @details 复位读/写索引与丢弃计数，准备接收数据。
* @note 若在中断环境使用，初始化前建议关闭相关接收中断以避免并发竞争。
* @ingroup RingBuffer
*/
void uart_ring_buffer_init(void);
/**
* @brief 获取当前可读的字节数。
* @details 返回范围为 [0, UART_RX_BUFFER_SIZE-1]。
* @return 可读字节数（uint8_t）。
* @note 预留一个空槽区分“空/满”，因此满时返回 UART_RX_BUFFER_SIZE-1。
* @ingroup RingBuffer
*/
uint8_t uart_ring_buffer_available(void);
/**
* @brief 从环形缓冲区读取一个字节。
* @details 若缓冲区非空，返回队头字节并推进读指针；若为空，返回 -1。
* @return 读取到的字节（0..255），或 -1 表示缓冲区为空。
* @retval -1 缓冲区为空，无数据可读。
* @ingroup RingBuffer
*/
int uart_ring_buffer_get(void);
/**
* @brief 向环形缓冲区写入一个字节。
* @param data 待写入的字节。
* @return 是否写入成功。
* @retval true 写入成功。
* @retval false 写入失败（缓冲区已满，数据被丢弃并计数）。
* @note 如需改为“覆盖写入”策略，可在满时先推进读指针再写入。
* @ingroup RingBuffer
*/
bool uart_ring_buffer_put(uint8_t data);
/**
* @brief 清空环形缓冲区。
* @details 复位读/写索引与丢弃计数，相当于逻辑上丢弃所有已接收数据，不擦除数据区内容。
* @ingroup RingBuffer
*/
void uart_ring_buffer_clear(void);
/**
* @brief 获取因缓冲区满而被丢弃的字节累计数量。
* @details 该计数在 init/clear 时清零。
* @return 丢弃的累计字节数。
* @ingroup RingBuffer
*/
uint32_t uart_ring_buffer_drop_count(void);
/** @} */
#endif // UART_RING_BUFFER_H

487
Src/command.c Normal file
View File

@@ -0,0 +1,487 @@
/**
* @file command.c
* @brief 串口命令解析与处理模块实现
* @details 实现基于状态机的协议解析器，支持 D5 03 LEN [cmd] CRC 格式的命令处理，
* 包含命令帧解析、响应生成和传感器状态管理功能。
* @author Hulk
* @date 2025-08-13
* @version 1.0.0
* @ingroup Command
*/
#include "command.h"
#include "uart_ring_buffer.h"
#include "led.h"
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>
#include "board_config.h"
#include "gd32e23x_usart.h"
#include "ldc1612.h"
#include "tmp112.h"
/* ============================================================================
* 协议格式说明
* ============================================================================ */
/**
* @name 协议帧格式
* @{
* @details
* Host -> Device 命令帧格式：
* [0] HEADER = 0xD5 // 包头标识
* [1] BOARD_TYPE = 0x03 // 板卡类型标识
* [2] LEN = 数据区字节数 // 有效载荷长度
* [3..(3+LEN-1)] 数据 // 命令数据，如 "M1", "M2S123"
* [last] CRC = 校验码 // 从索引1到(last-1)的累加和低8位
*
* 最小协议包长度为 6 字节
* 数据示例（两字节命令）："M1" / "M2" / "M3"
*
* Device -> Host 响应帧格式：
* [0] 0xB5 // 响应包头
* [1] TYPE // 响应类型（0xF0=成功，0xF1..=错误类型）
* [2] LEN // 响应数据长度
* [3..(3+LEN-1)] 数据 // 响应数据，如 "ok", "err"
* [last] CRC // 校验码（同命令帧规则）
* @}
*/
/* ============================================================================
* 协议常量定义
* ============================================================================ */
/** @name 协议帧标识符
* @{ */
#define PROTOCOL_PACKAGE_HEADER 0xD5 /**< 命令帧包头标识 */
#define PROTOCOL_BOARD_TYPE 0x03 /**< 板卡类型标识 */
/** @} */
/** @name 命令长度限制
* @{ */
#define COMMAND_MIN_LEN 2 /**< 最小命令长度，如"M1" */
#define PROTOCOL_MIN_FRAME_LEN (3 + COMMAND_MIN_LEN + 1) /**< 最小完整帧长度：header+type+len+payload+crc = 6 */
#define PROTOCOL_MAX_FRAME_LEN 16 /**< 最大完整帧长度 */
/** @} */
/** @name 响应帧标识符
* @{ */
#define RESP_HEADER 0xB5 /**< 响应帧包头标识 */
#define RESP_TYPE_OK 0xF0 /**< 成功响应类型 */
#define RESP_TYPE_CRC_ERR 0xF1 /**< CRC校验错误 */
#define RESP_TYPE_HEADER_ERR 0xF2 /**< 包头错误 */
#define RESP_TYPE_TYPE_ERR 0xF3 /**< 类型错误 */
#define RESP_TYPE_LEN_ERR 0xF4 /**< 长度错误 */
/** @} */
/* ============================================================================
* 模块内部变量
* ============================================================================ */
/** @brief 传感器周期上报使能标志 */
volatile bool g_eddy_current_sensor_report_enabled = false;
volatile bool g_temperature_sensor_report_enabled = false;
/** @name 预设响应数据
* @{ */
static const uint8_t s_report_status_ok[] = { 'o', 'k' }; /**< 成功响应数据 */
static const uint8_t s_report_status_err[] = { 'e','r','r' }; /**< 错误响应数据 */
/** @} */
/* ============================================================================
* 公共接口函数
* ============================================================================ */
/**
* @brief 查询电涡流传感器是否启用周期性传感器上报。
* @return true 表示启用；false 表示禁用。
* @ingroup Command
*/
bool get_eddy_sensor_report_enabled(void)
{
return g_eddy_current_sensor_report_enabled;
}
/**
* @brief 设置电涡流传感器是否启用周期性传感器上报标志。
* @details 本模块内部保存的布尔状态，供其他逻辑决定是否进行周期性数据上报；
* 推荐通过本函数修改而非直接访问全局/静态变量，以便后续扩展（如加锁/回调）。
* @param status true 启用周期上报；false 禁用。
* @ingroup Command
*/
void set_eddy_sensor_report_status(bool status)
{
g_eddy_current_sensor_report_enabled = status;
}
/**
* @brief 查询温度传感器是否启用周期性传感器上报。
* @return true 表示启用；false 表示禁用。
* @ingroup Command
*/
bool get_temp_sensor_report_enabled(void)
{
return g_temperature_sensor_report_enabled;
}
/**
* @brief 设置温度传感器是否启用周期性传感器上报标志。
* @details 本模块内部保存的布尔状态，供其他逻辑决定是否进行周期性数据上报；
* 推荐通过本函数修改而非直接访问全局/静态变量，以便后续扩展（如加锁/回调）。
* @param status true 启用周期上报；false 禁用。
* @ingroup Command
*/
void set_temp_sensor_report_status(bool status)
{
g_temperature_sensor_report_enabled = status;
}
/**
* @brief 计算协议包的 8 位累加校验值（Checksum）。
* @details 对输入缓冲区逐字节累加并取低 8 位，累加范围为 data[1] 至 data[len-2]，
* 即不包含包头 HEADER（索引 0）与尾部 CRC 字节（索引 len-1）。
* 当 len 小于最小协议帧长度（PACKAGE_MIN_LENGTH）时返回 0。
* @param data 指向待校验的完整协议包缓冲区。
* @param len 缓冲区总长度（字节），应满足 header + type + len + payload + crc 的最小格式。
* @return uint8_t 计算得到的 8 位校验值。
* @note 本函数实现为简单求和校验（Checksum），非多项式 CRC；与本协议“从索引 1 累加到 len-2”的规则一致。
* @ingroup Command
*/
static uint8_t command_sum_crc_calc(const uint8_t *data, uint8_t len)
{
uint16_t crc = 0;
// 仅在满足协议最小帧长时计算（header + type + len + payload + crc）
if (len < PROTOCOL_MIN_FRAME_LEN) return 0;
// 累加从索引 1 到 len-2 的字节（不含 header 和 crc 字节）
for (uint8_t i = 1; i < (len - 1); i++)
{
crc += data[i];
}
return (uint8_t)(crc & 0xFF);
}
/**
* @brief 发送协议响应帧（使用GD32E230标准库）。
* @details 构造并发送格式为 B5 TYPE LEN [payload] CRC 的响应帧，
* 自动计算CRC校验值并通过串口输出。
* @param type 响应类型码（如 RESP_TYPE_OK, RESP_TYPE_CRC_ERR 等）。
* @param payload 指向响应数据的缓冲区，当len为0时可为NULL。
* @param len 响应数据长度（字节），为0时不复制payload数据。
* @note 内部使用固定大小缓冲区，超长响应将被丢弃。
* @warning 使用GD32E230标准库函数发送，确保串口已正确初始化。
* @ingroup Command
*/
static void send_response(uint8_t type, const uint8_t *payload, uint8_t len)
{
uint8_t buf_len = (uint8_t)(3 + len + 1);
uint8_t buf[16]; // 简单场景足够，必要时可增大
if (buf_len > sizeof(buf)) return; // 防御
buf[0] = RESP_HEADER;
buf[1] = type;
buf[2] = len;
// 简化逻辑：只有当len > 0且payload非空时才复制数据
if (len > 0 && payload != NULL) {
for (uint8_t i = 0; i < len; i++) {
buf[3 + i] = payload[i];
}
}
buf[buf_len - 1] = command_sum_crc_calc(buf, buf_len);
// 使用GD32E230标准库函数逐字节发送（标准库实现）
for (uint8_t i = 0; i < buf_len; i++) {
// 等待发送缓冲区空
while (usart_flag_get(RS485_PHY, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(RS485_PHY, buf[i]);
}
// 等待发送完成
while (usart_flag_get(RS485_PHY, USART_FLAG_TC) == RESET) {}
// // 使用printf发送（通过重定向到串口）
// for (uint8_t i = 0; i < buf_len; i++) {
// printf("%c", buf[i]);
// }
// // 刷新缓冲区
// fflush(stdout);
}
/**
* @brief 判断字符是否为十进制数字字符。
* @param c 待检查的字符（ASCII码值）。
* @return bool 判断结果。
* @retval true 字符为 '0' 到 '9' 之间的数字字符。
* @retval false 字符不是十进制数字字符。
* @ingroup Command
*/
static inline bool is_dec_digit(uint8_t c) { return (c >= '0' && c <= '9'); }
/**
* @brief 从缓冲区解析十进制无符号整数。
* @details 从指定位置开始连续读取十进制数字字符，累加构成32位无符号整数。
* 遇到非数字字符或到达长度限制时停止解析。
* @param s 指向待解析字符缓冲区的起始位置。
* @param n 允许解析的最大字符数。
* @param out 输出参数，存储解析结果，可为NULL。
* @return uint8_t 实际消耗的字符数。
* @retval 0 首字符不是数字，解析失败。
* @retval >0 成功解析的数字字符个数。
* @note 不处理符号、空白字符或进制前缀。
* @warning 不进行溢出检查，超出uint32_t范围时按无符号算术溢出处理。
* @ingroup Command
*/
static uint8_t parse_uint_dec(const uint8_t *s, uint8_t n, uint32_t *out)
{
uint8_t i = 0;
uint32_t v = 0;
while (i < n && is_dec_digit(s[i]))
{
v = v * 10u + (uint32_t)(s[i] - '0');
i++;
}
if (i == 0) return 0; // 未读到数字
if (out) *out = v; //
return i;
}
/* ============================================================================
* 命令处理函数
* ============================================================================ */
/**
* @brief 解析并处理完整的命令帧。
* @details 处理经过协议校验的完整命令帧，支持以下命令格式：
* - 无参数命令：M<数字>（如 M1、M2、M10、M201）
* - 带参数命令：M<数字>S<参数>（如 M100S123，参数为十进制）
*
* 支持的命令：
* - M1: 开启LED，启用传感器上报
* - M2: 关闭LED，禁用传感器上报
* - M100S<value>: 设置PWM值（示例）
*
* @param frame 指向完整命令帧的缓冲区（从包头0xD5开始）。
* @param len 命令帧总长度（字节）。
* @note 函数内部进行帧格式校验，格式错误时自动发送错误响应。
* @warning 假设输入帧已通过基本协议校验（包头、类型、CRC等）。
* @ingroup Command
*/
void handle_command(const uint8_t *frame, uint8_t len) {
// 帧格式：D5 03 LEN [cmd] CRC; cmd 支持变长，如 "M1"、"M10"、"M201"、"M123S400"，有最小长度限制和命令长度校验
uint8_t cmd_len = frame[2];
if (len < PROTOCOL_MIN_FRAME_LEN || (uint8_t)(3 + cmd_len + 1) != len) return; // 长度不匹配或者小于最小限制
const uint8_t *cmd = &frame[3]; // 提取命令部分
// 命令必须以 'M' 开头
if (cmd[0] != 'M'){
send_response(RESP_TYPE_TYPE_ERR, s_report_status_err, sizeof(s_report_status_err));
return;
}
// 从 'M' 后开始解析
uint8_t cmd_index = 1;
// 解析M后的十进制数，即命令本体
uint32_t base_cmd = 0;
uint8_t used_base_cmd = parse_uint_dec(&cmd[cmd_index], (cmd_len - cmd_index), &base_cmd);
if (used_base_cmd == 0)
{
// 'M' 后没有数字，格式错误
send_response(RESP_TYPE_LEN_ERR, s_report_status_err, sizeof(s_report_status_err));
return;
}
cmd_index = (uint8_t)(cmd_index + used_base_cmd); // 更新索引到命令后
// 情况A：无附加参数的基础命令
if (cmd_index == cmd_len) {
// 仅基础命令，如 M1, M2, M3
switch (base_cmd) {
case 1u: // M1: enable sensor report
set_eddy_sensor_report_status(true);
return;
case 2u: // M2: disable sensor report
set_eddy_sensor_report_status(false);
return;
case 3u:
set_temp_sensor_report_status(true);
return;
case 4u:
set_temp_sensor_report_status(false);
return;
// case 201u: // M201命令
// send_response(RESP_TYPE_OK, s_report_status_ok, sizeof(s_report_status_ok));
// return;
default:
// 其它无参数命令在此扩展（示例：M100）处理逻辑该如何待定
// send_response(RESP_TYPE_OK, s_report_status_ok, sizeof(s_report_status_ok));
// return;
break;
}
// 未在处理列表的无参数基础命令，回复错误
send_response(RESP_TYPE_TYPE_ERR, s_report_status_err, sizeof(s_report_status_err));
return;
}
// 情况B：有附加参数的命令
if (cmd[cmd_index] == 'S') {
cmd_index++;
uint32_t param_value = 0;
const uint8_t used_param_cmd = parse_uint_dec(&cmd[cmd_index], (uint8_t)(cmd_len - cmd_index), &param_value);
if (used_param_cmd == 0) {
// 'S' 后没有数字，格式错误
send_response(RESP_TYPE_LEN_ERR, s_report_status_err, sizeof(s_report_status_err));
return;
}
switch (base_cmd)
{
// case 100u:
// // set_pwm(param_value);
// printf("Set PWM to %u\n", param_value);
// return;
default:
break;
}
send_response(RESP_TYPE_TYPE_ERR, s_report_status_err, sizeof(s_report_status_err));
}
}
/**
* @brief 处理串口环形缓冲区中的命令数据，解析完整的协议帧。
* @details 本函数实现一个基于状态机的协议解析器，用于处理格式为 D5 03 LEN [cmd] CRC 的命令帧：
* - 状态1：等待包头字节 PROTOCOL_PACKAGE_HEADER (0xD5)
* - 状态2：接收板卡类型字节 PROTOCOL_BOARD_TYPE (0x03)
* - 状态3：接收长度字段并计算期望的完整帧长度
* - 状态4：继续接收剩余数据直到完整帧
* - 状态5：对完整帧进行校验（包头、板卡类型、CRC）并处理
*
* 函数采用非阻塞方式处理，每次调用处理缓冲区中所有可用数据。
* 遇到格式错误、长度异常或校验失败时自动重置状态机。
*
* @note 本函数使用静态变量维护解析状态，因此不可重入。在中断环境中使用需注意并发安全。
* 协议帧最大长度受 PROTOCOL_MAX_FRAME_LEN 限制，超出范围的帧将被丢弃。
*
* @warning 函数依赖 uart_ring_buffer_available() 和 uart_ring_buffer_get()
* 正确实现，若这些函数有缺陷可能导致死循环或数据丢失。
*
* @see handle_command() 用于处理校验通过的完整命令帧
* @see command_sum_crc_calc() 用于计算和校验 CRC 值
* @see send_response() 用于发送错误响应
*
* @ingroup Command
*/
void command_process(void) {
static uint8_t cmd_buf[PROTOCOL_MAX_FRAME_LEN];
static uint8_t cmd_len = 0;
static uint8_t expected_cmd_len = 0; // 0 表示尚未确定总长度
while (uart_ring_buffer_available() > 0) {
int byte = uart_ring_buffer_get();
if (byte < 0) break;
if (cmd_len == 0) {
if ((uint8_t)byte == PROTOCOL_PACKAGE_HEADER) {
cmd_buf[cmd_len++] = (uint8_t)byte;
expected_cmd_len = 0; // 等待进一步字段以确定长度
} else {
// 丢弃非起始字节
}
continue;
}
if (cmd_len >= PROTOCOL_MAX_FRAME_LEN) {
// 防御：缓冲溢出，复位状态机
cmd_len = 0;
expected_cmd_len = 0;
}
// 缓存后续字节
cmd_buf[cmd_len++] = (uint8_t)byte;
// 当到达长度字段（索引 2）后，确定总长度：3 + LEN + 1
if (cmd_len == 3) {
uint8_t payload_len = cmd_buf[2];
expected_cmd_len = (uint8_t)(3 + payload_len + 1);
if (expected_cmd_len > PROTOCOL_MAX_FRAME_LEN) {
// 异常：长度超界，复位状态机
cmd_len = 0;
expected_cmd_len = 0;
}
continue;
}
if (expected_cmd_len > 0 && cmd_len == expected_cmd_len) {
// 到帧尾，进行各项校验
bool verification_status = true;
#ifdef DEBUG_VERBOSE
if (cmd_buf[0] != PROTOCOL_PACKAGE_HEADER) {
send_response(RESP_TYPE_HEADER_ERR, s_report_status_err, sizeof(s_report_status_err));
verification_status = false;
}
#endif
if (verification_status && cmd_buf[1] != PROTOCOL_BOARD_TYPE) {
send_response(RESP_TYPE_TYPE_ERR, s_report_status_err, sizeof(s_report_status_err));
verification_status = false;
}
if (verification_status) {
uint8_t crc_calc = command_sum_crc_calc(cmd_buf, expected_cmd_len);
uint8_t crc_recv = cmd_buf[expected_cmd_len - 1];
if (crc_calc != crc_recv) {
send_response(RESP_TYPE_CRC_ERR, s_report_status_err, sizeof(s_report_status_err));
verification_status = false;
}
}
if (verification_status) {
handle_command(cmd_buf, expected_cmd_len);
}
// 复位，等待下一帧
cmd_len = 0;
expected_cmd_len = 0;
}
}
}
void eddy_current_report(void) {
// if (!g_eddy_current_sensor_report_enabled) return;
uint32_t raw_result = ldc1612_get_raw_channel_result(CHANNEL_0);
uint8_t sensor_data[4];
sensor_data[0] = (uint8_t)(raw_result >> 24);
sensor_data[1] = (uint8_t)(raw_result >> 16);
sensor_data[2] = (uint8_t)(raw_result >> 8);
sensor_data[3] = (uint8_t)(raw_result & 0xFF);
send_response(RESP_TYPE_OK, sensor_data, sizeof(sensor_data));
}
void temperature_raw_value_report(void) {
// if (!g_temperature_sensor_report_enabled) return;
uint8_t raw_result[4];
uint8_t value[2] = {0};
uint32_t raw_value = 0;
// i2c_read_16bits(TMP112A_ADDR, TMP112A_TEMP_REG, value);
tmp112a_get_raw_temperature_value(value);
raw_value = (uint32_t)((uint16_t) (value[0] << 4) | (value[1]>>4)) * 625;
raw_result[0] = (uint8_t)(raw_value >> 24);
raw_result[1] = (uint8_t)(raw_value >> 16);
raw_result[2] = (uint8_t)(raw_value >> 8);
raw_result[3] = (uint8_t)(raw_value & 0xFF);
send_response(RESP_TYPE_OK, raw_result, sizeof(raw_result));
}

14
Src/gd32e23x_it.c
View File

@@ -34,6 +34,9 @@ OF SUCH DAMAGE.
#include "gd32e23x_it.h"
#include "systick.h"
#include "uart.h"
#include "uart_ring_buffer.h"
#include "led.h"
/*!
\brief this function handles NMI exception
@@ -93,7 +96,14 @@ void PendSV_Handler(void)
\param[out] none
\retval none
*/
void SysTick_Handler(void)
{
void SysTick_Handler(void) {
led_heart_beat(); // LED心跳指示灯
delay_decrement();
}
void USART0_IRQHandler(void) {
if (RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE)) {
uint8_t data = usart_data_receive(USART0);
(void)uart_ring_buffer_put(data); // 缓冲满时丢弃，返回值可用于统计
}
}

677
Src/i2c.c Normal file
View File

@@ -0,0 +1,677 @@
//
// Created by dell on 24-12-20.
//
#include "i2c.h"
/*!
\brief configure the GPIO ports
\param[in] none
\param[out] none
\retval none
*/
void i2c_gpio_config(void) {
/* enable IIC GPIO clock */
rcu_periph_clock_enable(RCU_GPIO_I2C);
/* connect I2C_SCL_PIN to I2C_SCL */
gpio_af_set(I2C_SCL_PORT, I2C_GPIO_AF, I2C_SCL_PIN);
/* connect I2C_SDA_PIN to I2C_SDA */
gpio_af_set(I2C_SDA_PORT, I2C_GPIO_AF, I2C_SDA_PIN);
/* configure GPIO pins of I2C */
gpio_mode_set(I2C_SCL_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, I2C_SCL_PIN);
gpio_output_options_set(I2C_SCL_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SCL_PIN);
gpio_mode_set(I2C_SDA_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, I2C_SDA_PIN);
gpio_output_options_set(I2C_SDA_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SDA_PIN);
}
/*!
\brief configure the I2CX interface
\param[in] none
\param[out] none
\retval none
*/
i2c_result_t i2c_config(void) {
/* configure I2C GPIO */
i2c_gpio_config();
/* enable I2C clock */
rcu_periph_clock_enable(RCU_I2C);
/* configure I2C clock */
i2c_clock_config(I2C0, I2C_SPEED, I2C_DTCY_2);
/* configure I2C address */
i2c_mode_addr_config(I2C0, I2C_I2CMODE_ENABLE, I2C_ADDFORMAT_7BITS, 0xA0);
/* enable I2CX */
i2c_enable(I2C0);
/* enable acknowledge */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
return I2C_RESULT_SUCCESS;
}
/* wait for SCL to go high, return true if successful, false if timeout */
static bool i2c_wait_scl_high(uint16_t max_wait_time) {
while (max_wait_time--) {
if (gpio_input_bit_get(I2C_SCL_PORT, I2C_SCL_PIN)) {
return true;
}
delay_10us(1);
}
return false;
}
/* generate one manual SCL pulse; return true if SCL observed high (no stuck/overstretch) */
static bool i2c_generate_scl_pulse(void) {
GPIO_BC(I2C_SCL_PORT) = I2C_SCL_PIN; /* drive SCL low */
delay_10us(1);
GPIO_BOP(I2C_SCL_PORT) = I2C_SCL_PIN; /* release SCL (open-drain -> high via pull-up) */
return i2c_wait_scl_high(200); /* wait up to ~2ms for clock stretching release */
}
/*!
\brief reset I2C bus
\param[in] none
\param[out] none
\retval none
*/
i2c_result_t i2c_bus_reset(void) {
/* 1. Disable & deinit peripheral so pins can be fully controlled */
i2c_disable(I2C0);
i2c_deinit(I2C0);
#ifdef DEBUG_VERBOSE
printf("I2C bus reset\r\n");
#endif
/* 2. Configure SCL/SDA as GPIO open-drain outputs with pull-up and release them */
gpio_mode_set(I2C_SCL_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, I2C_SCL_PIN);
gpio_mode_set(I2C_SDA_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_PULLUP, I2C_SDA_PIN);
gpio_output_options_set(I2C_SCL_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SCL_PIN);
gpio_output_options_set(I2C_SDA_PORT, GPIO_OTYPE_OD, GPIO_OSPEED_50MHZ, I2C_SDA_PIN);
gpio_bit_set(I2C_SCL_PORT, I2C_SCL_PIN); /* release SCL */
gpio_bit_set(I2C_SDA_PORT, I2C_SDA_PIN); /* release SDA */
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: SCL = %d, SDA = %d\r\n", gpio_input_bit_get(I2C_SCL_PORT, I2C_SCL_PIN), gpio_input_bit_get(I2C_SDA_PORT, I2C_SDA_PIN));
#endif
/* 3. Double sample to confirm bus state */
delay_10us(1);
bool scl_value1 = gpio_input_bit_get(I2C_SCL_PORT, I2C_SCL_PIN);
bool sda_value1 = gpio_input_bit_get(I2C_SDA_PORT, I2C_SDA_PIN);
delay_10us(1);
bool scl_value2 = gpio_input_bit_get(I2C_SCL_PORT, I2C_SCL_PIN);
bool sda_value2 = gpio_input_bit_get(I2C_SDA_PORT, I2C_SDA_PIN);
/* 4. If SCL low -> stuck (cannot proceed) */
if (!scl_value2) {
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: SCL stuck low\r\n");
#endif
return I2C_RECOVERY_SCL_STUCK_LOW;
}
/* 5. Fast path: bus idle */
if (scl_value1 && sda_value1 && scl_value2 && sda_value2) {
i2c_config();
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: bus idle\r\n");
#endif
return I2C_RECOVERY_OK;
}
/* 6. SDA low: attempt to free by generating up to I2C_RECOVERY_CLOCKS pulses */
if (scl_value2 && !sda_value2) {
bool sda_released = false;
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: SCL will try to free SDA\r\n");
#endif
for (uint8_t i = 0; i < I2C_RECOVERY_CLOCKS && !sda_released; i++) {
if (!i2c_generate_scl_pulse()) {
return I2C_RECOVERY_SCL_STUCK_LOW; /* SCL failed to go high */
}
if (gpio_input_bit_get(I2C_SDA_PORT, I2C_SDA_PIN)) {
sda_released = true;
}
}
if (!sda_released) {
return I2C_RECOVERY_SDA_STUCK_LOW;
}
/* 7. Generate a STOP condition to leave bus in idle state */
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: generating STOP condition\r\n");
#endif
gpio_bit_reset(I2C_SDA_PORT, I2C_SDA_PIN); /* SDA low */
delay_10us(1);
gpio_bit_set(I2C_SCL_PORT, I2C_SCL_PIN); /* ensure SCL high */
delay_10us(1);
gpio_bit_set(I2C_SDA_PORT, I2C_SDA_PIN); /* SDA rising while SCL high -> STOP */
delay_10us(1);
}
#ifdef DEBUG_VERBOSE
printf("I2C bus reset: bus recovered\r\n");
#endif
/* 8. Reconfigure & enable peripheral */
i2c_config();
return I2C_RECOVERY_OK;
}
/**
* @brief 扫描I2C总线，查找连接的设备
*
* 该函数会扫描I2C总线上的所有地址（1到126），并尝试与每个地址进行通信。
* 如果在某个地址上发现了设备，则会打印出该设备的地址。
* 最后会打印出找到的设备总数。
*/
void i2c_scan(void) {
uint32_t timeout;
uint8_t address;
int found_devices = 0;
// printf("Scanning I2C bus...\r\n");
const char* msg1 = "Scanning I2C bus...\r\n";
for (uint8_t i = 0; msg1[i] != '\0'; i++) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, msg1[i]);
}
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TC) == RESET) {}
for (address = 1; address < 127; address++) {
timeout = 0;
// 生成起始条件
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout >= I2C_TIME_OUT) {
continue; // 超时，跳过该地址
}
i2c_start_on_bus(I2C0);
timeout = 0;
// 等待起始条件发送完成
while (!i2c_flag_get(I2C0, I2C_FLAG_SBSEND) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout >= I2C_TIME_OUT) {
continue; // 超时，跳过该地址
}
i2c_master_addressing(I2C0, (address << 1), I2C_TRANSMITTER);
timeout = 0;
// 等待地址发送完成
while (!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND) && (timeout < I2C_TIME_OUT))
timeout++;
if (timeout < I2C_TIME_OUT) {
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
// printf("Found device at 0x%02X\r\n", address);
const char* msg2_prefix = "Found device at 0x";
for (uint8_t i = 0; msg2_prefix[i] != '\0'; i++) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, msg2_prefix[i]);
}
// 发送地址的十六进制表示
uint8_t hex_chars[] = "0123456789ABCDEF";
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, hex_chars[(address >> 4) & 0x0F]);
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, hex_chars[address & 0x0F]);
const char* msg2_suffix = "\r\n";
for (uint8_t i = 0; msg2_suffix[i] != '\0'; i++) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, msg2_suffix[i]);
}
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TC) == RESET) {}
found_devices++;
}
// 生成停止条件
i2c_stop_on_bus(I2C0);
timeout = 0;
while (i2c_flag_get(I2C0, I2C_FLAG_STPDET) && (timeout < I2C_TIME_OUT))
timeout++;
}
if (found_devices == 0) {
// printf("No I2C devices found.\r\n");
const char* msg3 = "No I2C devices found.\r\n";
for (uint8_t i = 0; msg3[i] != '\0'; i++) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, msg3[i]);
}
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TC) == RESET) {}
} else {
// printf("Total %d I2C devices found.\r\n", found_devices);
const char* msg4_prefix = "Total ";
for (uint8_t i = 0; msg4_prefix[i] != '\0'; i++) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, msg4_prefix[i]);
}
// 发送设备数量
if (found_devices >= 10) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, '0' + (found_devices / 10));
}
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, '0' + (found_devices % 10));
const char* msg4_suffix = " I2C devices found.\r\n";
for (uint8_t i = 0; msg4_suffix[i] != '\0'; i++) {
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(I2C_DEBUG_UART, msg4_suffix[i]);
}
while (usart_flag_get(I2C_DEBUG_UART, USART_FLAG_TC) == RESET) {}
}
}
i2c_result_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]) {
i2c_state_t state = I2C_STATE_START;
uint16_t timeout = 0;
uint8_t retry_count = 0;
/* parameter validation */
if (data == NULL || slave_addr > 0x7F) {
return I2C_RESULT_INVALID_PARAM;
}
while (retry_count < I2C_MAX_RETRY) {
switch (state) {
case I2C_STATE_START:
timeout = 0;
/* wait for bus to be idle */
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
i2c_start_on_bus(I2C0);
timeout = 0;
state = I2C_STATE_SEND_ADDRESS;
break;
case I2C_STATE_SEND_ADDRESS:
/* wait for start condition to be sent. SBSEND flag */
while((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send slave address */
i2c_master_addressing(I2C0, slave_addr << 1, I2C_TRANSMITTER);
timeout = 0;
state = I2C_STATE_CLEAR_ADDRESS;
break;
case I2C_STATE_CLEAR_ADDRESS:
/* wait for address to be acknowledged.ADDSEND set means i2c slave sends ACK */
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (!i2c_flag_get(I2C0, I2C_FLAG_AERR)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
} else if (i2c_flag_get(I2C0, I2C_FLAG_ADDSEND))
{
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
timeout =0;
state = I2C_STATE_TRANSMIT_REG;
break;
} else {
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
timeout =0;
#ifdef DEBUG_VERBOES
printf("IIC write failed for Error Slave Address. \n");
#endif
return I2C_RESULT_NACK;
}
case I2C_STATE_TRANSMIT_REG:
/* wait until the transmit data buffer is empty */
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register address */
i2c_data_transmit(I2C0, reg_addr);
timeout = 0;
state = I2C_STATE_TRANSMIT_DATA;
break;
case I2C_STATE_TRANSMIT_DATA:
/* wait until the transmit data buffer is empty */
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register MSB value */
i2c_data_transmit(I2C0, data[0]);
timeout = 0;
/* wait until the transmit data buffer is empty */
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
i2c_stop_on_bus(I2C0);
return I2C_RESULT_NACK;
} else if (i2c_flag_get(I2C0, I2C_FLAG_BERR) || i2c_flag_get(I2C0, I2C_FLAG_LOSTARB)) {
// 可按需清标志
i2c_stop_on_bus(I2C0);
return I2C_RESULT_ERROR;
}
/* send register LSB value */
i2c_data_transmit(I2C0, data[1]);
timeout = 0;
/* wait until BTC bit is set */
while (!i2c_flag_get(I2C0, I2C_FLAG_BTC) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
state = I2C_STATE_STOP;
break;
case I2C_STATE_STOP:
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
timeout = 0;
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* i2c master sends STOP signal successfully */
/* success */
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
/* send a stop condition to I2C bus */
i2c_stop_on_bus(I2C0);
timeout = 0;
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
return I2C_RESULT_ERROR;
}
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
i2c_flag_clear(I2C0, I2C_FLAG_BERR);
i2c_flag_clear(I2C0, I2C_FLAG_LOSTARB);
retry_count ++;
if (retry_count >= I2C_MAX_RETRY)
{
#ifdef DEBUG_VERBOES
printf("IIC write failed after %d retries\n", I2C_MAX_RETRY);
#endif
return I2C_RESULT_ERROR;
}
/* reset state machine for retry */
state = I2C_STATE_START;
timeout = 0;
/* small delay before retry */
delay_10us(10);
break;
default:
state = I2C_STATE_START;
break;
}
}
return I2C_RESULT_TIMEOUT;
}
i2c_result_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data) {
i2c_state_t state = I2C_STATE_START;
uint16_t timeout = 0;
uint8_t retry_count = 0;
bool write_phase = true;
// 参数检查：防止空指针和非法地址
if (data == NULL || slave_addr > 0x7F) {
return I2C_RESULT_INVALID_PARAM;
}
/* enable acknowledge */
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
while (retry_count < (uint8_t)I2C_MAX_RETRY) {
switch (state) {
case I2C_STATE_START:
timeout = 0;
// wait for bus to be idle
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
// send start condition
i2c_start_on_bus(I2C0);
state = I2C_STATE_SEND_ADDRESS;
timeout = 0;
break;
case I2C_STATE_SEND_ADDRESS:
/* wait for start condition to be sent */
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
// send slave address
if (write_phase) {
/* write phase: send address with write bit */
i2c_master_addressing(I2C0, (slave_addr << 1), I2C_TRANSMITTER);
} else {
/* read phase: send address with read bit */
i2c_master_addressing(I2C0, (slave_addr << 1) | 0x01, I2C_RECEIVER);
}
state = I2C_STATE_CLEAR_ADDRESS;
timeout = 0;
break;
case I2C_STATE_CLEAR_ADDRESS:
/* wait for address to be acknowledged */
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
if (write_phase) {
/* clear address flag (write phase) */
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
state = I2C_STATE_TRANSMIT_DATA;
} else {
/* READ phase for 2 bytes: set POS=NEXT and disable ACK BEFORE clearing ADDR */
i2c_ackpos_config(I2C0, I2C_ACKPOS_NEXT);
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
/* now clear address flag to release SCL and enter data phase */
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
state = I2C_STATE_RECEIVE_DATA;
}
timeout = 0;
break;
case I2C_STATE_TRANSMIT_DATA:
/* wait for transmit buffer to be empty */
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send register address */
i2c_data_transmit(I2C0, reg_addr);
state = I2C_STATE_RESTART;
timeout = 0;
break;
case I2C_STATE_RESTART:
/* wait for byte transfer complete BTC: Bit Transfer Complete */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* generate repeated start condition */
i2c_start_on_bus(I2C0);
/* wait for repeated start condition to be sent */
timeout = 0;
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* send slave address with read bit (R/W bit is set by library) */
i2c_master_addressing(I2C0, (slave_addr << 1), I2C_RECEIVER);
/* switch to read phase */
write_phase = false;
state = I2C_STATE_CLEAR_ADDRESS;
timeout = 0;
break;
case I2C_STATE_RECEIVE_DATA:
/* Wait for BTC (both bytes received) */
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* Send STOP before reading the last two bytes */
i2c_stop_on_bus(I2C0);
/* Read the two bytes back-to-back */
data[0] = i2c_data_receive(I2C0);
data[1] = i2c_data_receive(I2C0);
state = I2C_STATE_STOP;
break;
case I2C_STATE_STOP:
/* wait for stop condition to complete */
while ((I2C_CTL0(I2C0) & I2C_CTL0_STOP) && (timeout < I2C_TIME_OUT)) {
timeout++;
}
if (timeout >= I2C_TIME_OUT) {
state = I2C_STATE_ERROR;
break;
}
/* i2c master sends STOP signal successfully */
/* success */
return I2C_RESULT_SUCCESS;
case I2C_STATE_ERROR:
/* send stop condition to release bus */
i2c_stop_on_bus(I2C0);
retry_count++;
if (retry_count >= I2C_MAX_RETRY) {
#ifdef DEBUG_VERBOES
printf("IIC read failed after %d retries\n", I2C_RETRY_MAX);
#endif
return I2C_RESULT_ERROR;
}
/* reset state machine for retry */
state = I2C_STATE_START;
write_phase = true;
timeout = 0;
/* small delay before retry */
delay_10us(10);
break;
default:
state = I2C_STATE_START;
break;
}
}
return I2C_RESULT_TIMEOUT;
}
#ifdef DEBUG_VERBOSE
/*!
\brief get status string for debugging
\param[in] status: i2c_status_t value
\param[out] none
\retval const char* status string
*/
const char* i2c_get_status_string(i2c_result_t status) {
switch (status) {
case I2C_RESULT_SUCCESS:
return "SUCCESS";
case I2C_RESULT_TIMEOUT:
return "TIMEOUT";
case I2C_RESULT_NACK:
return "NACK";
case I2C_RESULT_BUS_BUSY:
return "BUS_BUSY";
case I2C_RESULT_ERROR:
return "ERROR";
case I2C_RESULT_INVALID_PARAM:
return "INVALID_PARAM";
default:
return "UNKNOWN";
}
}
#endif

47
Src/led.c
View File

@@ -1,20 +1,57 @@
#include "led.h"
/**
* @brief LED心跳指示灯功能
* @details 实现类似心跳的LED闪烁模式：快闪两次然后暂停
* 适合在SysTick中断中调用，通过计数器控制闪烁节拍
* @note 假设SysTick中断频率为1ms，心跳周期约为2秒
* 心跳模式：亮200ms->灭200ms->亮200ms->灭1400ms（循环）
*/
void led_heart_beat(void)
{
static uint16_t heart_beat_counter = 0;
// 心跳周期：2000ms (假设SysTick为1ms中断)
// 模式：亮200ms -> 灭200ms -> 亮200ms -> 灭1400ms
heart_beat_counter++;
if (heart_beat_counter <= 200) {
// 第一次亮：0-200ms
led_on();
}
else if (heart_beat_counter <= 400) {
// 第一次灭：200-400ms
led_off();
}
else if (heart_beat_counter <= 600) {
// 第二次亮：400-600ms
led_on();
}
else if (heart_beat_counter <= 2000) {
// 长时间灭：600-2000ms
led_off();
}
else {
// 重置计数器，开始新的心跳周期
heart_beat_counter = 0;
}
}
void led_init(void) {
rcu_periph_clock_enable(LED_RCU);
gpio_mode_set(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_PIN);
gpio_output_options_set(LED_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, LED_PIN);
gpio_bit_reset(LED_PORT, LED_PIN);
}
void led_on(void) {
gpio_bit_set(LED_PORT, LED_PIN);
}
void led_off(void) {
void led_on(void) {
gpio_bit_reset(LED_PORT, LED_PIN);
}
void led_off(void) {
gpio_bit_set(LED_PORT, LED_PIN);
}
void led_toggle(void) {
gpio_bit_toggle(LED_PORT, LED_PIN);
}

39
Src/main.c
View File

@@ -36,7 +36,12 @@ OF SUCH DAMAGE.
#include "systick.h"
#include "uart.h"
#include "led.h"
#include "command.h"
#include <stdio.h>
#include "i2c.h"
#include "board_config.h"
#include "ldc1612.h"
#include "tmp112.h"
/*!
\brief main function
@@ -46,17 +51,35 @@ OF SUCH DAMAGE.
*/
int main(void)
{
systick_config();
uart0_init(115200);
// uart1_init(115200); // 如需使用USART1请初始化
// printf("Hello USART0!\r\n");
// uart_set_printf_port(UART_PRINTF_USART1); // 切换printf到USART1
// uart_set_printf_port(UART_PRINTF_BOTH); // 同时输出到USART0和USART1
setbuf(stdout, NULL);
systick_config();
rs485_init();
led_init();
#ifdef DEBUG_VERBOSE
char hello_world[] = {"Hello World!\r\n"};
for (uint8_t i = 0; i < sizeof(hello_world); i++)
{
while (usart_flag_get(RS485_PHY, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(RS485_PHY, hello_world[i]);
}
while (usart_flag_get(RS485_PHY, USART_FLAG_TC) == RESET) {}
#endif
i2c_config();
#ifdef DEBUG_VERBOSE
i2c_scan();
i2c_bus_reset();
#endif
while(1){
led_toggle();
delay_ms(200);
command_process();
delay_ms(10);
}
}

167
Src/systick.c
View File

@@ -1,83 +1,118 @@
/*!
\file systick.c
\brief the systick configuration file
\version 2025-02-10, V2.4.0, demo for GD32E23x
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
/**
* ************************************************************************
*
* @file systick.c
* @author GD32
* @brief 通过 SysTick 定时器进行微秒级别和毫秒级别的延时函数
*
* ************************************************************************
* @copyright Copyright (c) 2024 GD32
* ************************************************************************
*/
#include "gd32e23x.h"
#include "systick.h"
volatile static uint32_t delay;
volatile static uint32_t delay_count = 0;
/*!
\brief configure systick
\param[in] none
\param[out] none
\retval none
*/
/**
* ************************************************************************
* @brief 配置 SysTick 定时器
*
*
* ************************************************************************
*/
void systick_config(void)
{
/* setup systick timer for 1000Hz interrupts */
if (SysTick_Config(SystemCoreClock / 1000U)){
/* capture error */
while (1){
}
}
/* configure the systick handler priority */
//设置了 SysTick 定时器的时钟源为 HCLK
systick_clksource_set(SYSTICK_CLKSOURCE_HCLK);
// 配置SysTick为1ms周期中断
// 注意：SysTick_Config会自动设置时钟源为HCLK，所以需要使用SystemCoreClock/1000
SysTick_Config(SystemCoreClock / 1000U); // 1ms中断
NVIC_SetPriority(SysTick_IRQn, 0x00U);
}
/*!
\brief delay a time in milliseconds
\param[in] count: count in milliseconds
\param[out] none
\retval none
*/
/**
* ************************************************************************
* @brief delay_ms 毫秒延时函数
*
* @param[in] count 毫秒值
*
* ************************************************************************
*/
void delay_10us(uint32_t count)
{
// 基于系统时钟的简单循环延时
// 这是一个粗略的估计，实际延时可能有偏差 实测10.2us
uint32_t loops_per_10us = SystemCoreClock / 1700000; // 粗略估计，每10微秒的循环次数
for(uint32_t i = 0; i < count; i++) {
for(volatile uint32_t j = 0; j < loops_per_10us; j++);
}
}
/**
* ************************************************************************
* @brief delay_ms 毫秒延时函数
*
* @param[in] count 毫秒值
*
* ************************************************************************
*/
void delay_ms(uint32_t count)
{
delay = count;
while(0U != delay){
}
delay_count = count; // 设置延时计数
while (delay_count != 0U);
}
/*!
\brief delay decrement
\param[in] none
\param[out] none
\retval none
*/
/**
* ************************************************************************
* @brief 每个 SysTick 中断调用时，减少延时计数
*
* @param[in] void
*
* ************************************************************************
*/
void delay_decrement(void)
{
if (0U != delay){
delay--;
if (delay_count != 0U)
{
delay_count--;
}
}
// /**
// * ************************************************************************
// * @brief delay_ms_safe 毫秒延时函数（不干扰SysTick中断）
// * @details 使用简单循环实现延时，不会重新配置SysTick
// * @param[in] count 毫秒值
// * ************************************************************************
// */
// void delay_ms_safe(uint32_t count)
// {
// // 基于系统时钟的简单循环延时
// // 这是一个粗略的估计，实际延时可能有偏差
// uint32_t loops_per_ms = SystemCoreClock / 14000; // 粗略估计
// for(uint32_t i = 0; i < count; i++) {
// for(volatile uint32_t j = 0; j < loops_per_ms; j++);
// }
// }
// /**
// * ************************************************************************
// * @brief delay_us_safe 微秒延时函数（不干扰SysTick中断）
// * @details 使用简单循环实现延时，不会重新配置SysTick
// * @param[in] count 微秒值
// * ************************************************************************
// */
// void delay_us_safe(uint32_t count)
// {
// // 基于系统时钟的简单循环延时
// // 这是一个粗略的估计，实际延时可能有偏差
// uint32_t loops_per_us = SystemCoreClock / 22000000; // 粗略估计，每微秒的循环次数
// for(uint32_t i = 0; i < count; i++) {
// for(volatile uint32_t j = 0; j < loops_per_us; j++);
// }
// }

108
Src/uart.c
View File

@@ -2,65 +2,71 @@
#include "gd32e23x_usart.h"
#include "gd32e23x_rcu.h"
#include "gd32e23x_gpio.h"
#include "board_config.h"
void uart0_init(uint32_t baudrate) {
void rs485_init(void) {
#ifndef RS485_MAX13487
/* 使能 GPIOA 和 USART0 时钟 */
rcu_periph_clock_enable(RCU_GPIOA);
rcu_periph_clock_enable(RCU_USART0);
rcu_periph_clock_enable(RS485_GPIO_RCU);
rcu_periph_clock_enable(RS485_RCU);
/* 配置 PA9 为 USART0_TX，PA10 为 USART0_RX */
gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_9 | GPIO_PIN_10);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_9 | GPIO_PIN_10);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_9 | GPIO_PIN_10);
/* 配置 PA2 为 USART0_TX，PA3 为 USART0_RX */
gpio_af_set(RS485_GPIO_PORT, GPIO_AF_1, RS485_TX_PIN | RS485_RX_PIN | RS485_EN_PIN);
gpio_mode_set(RS485_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, RS485_TX_PIN | RS485_RX_PIN);
gpio_output_options_set(RS485_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, RS485_TX_PIN | RS485_RX_PIN);
gpio_mode_set(RS485_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_NONE, RS485_EN_PIN);
gpio_output_options_set(RS485_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, RS485_EN_PIN);
/* 配置波特率、数据位、停止位等 */
usart_deinit(USART0);
usart_baudrate_set(USART0, baudrate);
usart_receive_config(USART0, USART_RECEIVE_ENABLE);
usart_transmit_config(USART0, USART_TRANSMIT_ENABLE);
usart_enable(USART0);
}
usart_deinit(RS485_PHY);
usart_word_length_set(RS485_PHY, USART_WL_8BIT);
usart_stop_bit_set(RS485_PHY, USART_STB_1BIT);
usart_parity_config(RS485_PHY, USART_PM_NONE);
usart_baudrate_set(RS485_PHY, RS485_BAUDRATE);
usart_receive_config(RS485_PHY, USART_RECEIVE_ENABLE);
usart_transmit_config(RS485_PHY, USART_TRANSMIT_ENABLE);
void uart1_init(uint32_t baudrate) {
rcu_periph_clock_enable(RCU_GPIOA);
rcu_periph_clock_enable(RCU_USART1);
// USART1 默认引脚为 PA2 (TX), PA3 (RX)
gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);
gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_2 | GPIO_PIN_3);
gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, GPIO_PIN_2 | GPIO_PIN_3);
usart_deinit(USART1);
usart_baudrate_set(USART1, baudrate);
usart_receive_config(USART1, USART_RECEIVE_ENABLE);
usart_transmit_config(USART1, USART_TRANSMIT_ENABLE);
usart_enable(USART1);
}
usart_driver_assertime_config(RS485_PHY, 0x01);
usart_driver_deassertime_config(RS485_PHY, 0x10);
static uart_printf_port_t g_printf_port = UART_PRINTF_USART0;
usart_rs485_driver_enable(RS485_PHY);
void uart_set_printf_port(uart_printf_port_t port) {
g_printf_port = port;
}
usart_enable(RS485_PHY);
// printf 重定向，支持多串口
int __io_putchar(int ch) {
switch (g_printf_port) {
case UART_PRINTF_USART0:
while (usart_flag_get(USART0, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(USART0, (uint8_t)ch);
break;
case UART_PRINTF_USART1:
while (usart_flag_get(USART1, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(USART1, (uint8_t)ch);
break;
case UART_PRINTF_BOTH:
while (usart_flag_get(USART0, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(USART0, (uint8_t)ch);
while (usart_flag_get(USART1, USART_FLAG_TBE) == RESET) {}
usart_data_transmit(USART1, (uint8_t)ch);
break;
default:
break;
nvic_irq_enable(USART0_IRQn, 0);
usart_interrupt_enable(RS485_PHY, USART_INT_RBNE);
// usart_interrupt_enable(RS485_PHY, USART_INT_IDLE);
#else
rcu_periph_clock_enable(RS485_GPIO_RCU);
rcu_periph_clock_enable(RS485_RCU);
gpio_af_set(RS485_GPIO_PORT, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);
/* configure USART Tx&Rx as alternate function push-pull */
gpio_mode_set(RS485_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, RS485_TX_PIN | RS485_RX_PIN);
gpio_output_options_set(RS485_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, RS485_TX_PIN | RS485_RX_PIN);
/* configure RS485 EN Pin */
gpio_mode_set(RS485_GPIO_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, RS485_EN_PIN);
gpio_output_options_set(RS485_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, RS485_EN_PIN);
gpio_bit_write(RS485_GPIO_PORT, RS485_EN_PIN, SET);
/* USART configure */
usart_deinit(RS485_PHY);
usart_baudrate_set(RS485_PHY, RS485_BAUDRATE);
usart_receive_config(RS485_PHY, USART_RECEIVE_ENABLE);
usart_transmit_config(RS485_PHY, USART_TRANSMIT_ENABLE);
usart_enable(RS485_PHY);
nvic_irq_enable(USART0_IRQn, 0);
usart_interrupt_enable(RS485_PHY, USART_INT_RBNE);
usart_interrupt_enable(RS485_PHY, USART_INT_IDLE);
#endif // RS485_MAX13487
}
return ch;
}

104
Src/uart_ring_buffer.c Normal file
View File

@@ -0,0 +1,104 @@
/**
* @file uart_ring_buffer.c
* @brief 字节环形接收缓冲区的实现。
* @details 适用于中断接收（写）与主循环解析（读）的典型串口场景；
* 采用“预留一格”区分空/满，最大可用容量为 UART_RX_BUFFER_SIZE-1。
* @ingroup RingBuffer
*/
#include "uart_ring_buffer.h"
static volatile uint8_t uart_rx_buffer[UART_RX_BUFFER_SIZE];
static volatile uint8_t write_index = 0;
static volatile uint8_t read_index = 0;
static volatile uint32_t dropped_bytes = 0;
/**
* @brief 重置环形缓冲区状态。
* @details 将读指针、写指针与丢弃计数清零，不清空数据区内容。
* @note 内部工具函数；对外请优先使用 uart_ring_buffer_init()/uart_ring_buffer_clear()。
* @ingroup RingBuffer
*/
static void uart_ring_buffer_reset_state(void) {
write_index = 0;
read_index = 0;
dropped_bytes = 0;
}
/**
* @brief 初始化环形缓冲区。
* @details 调用内部重置逻辑，复位读写索引与丢弃计数，准备接收数据。
* @note 若在中断环境使用，初始化前建议关闭相关接收中断以避免并发竞争。
* @ingroup RingBuffer
*/
void uart_ring_buffer_init(void) {
uart_ring_buffer_reset_state();
}
/**
* @brief 获取当前可读的字节数。
* @details 通过读/写指针的快照计算可读长度，范围为 [0, UART_RX_BUFFER_SIZE-1]。
* @return uint8_t 可读字节数。
* @note 预留一个空槽区分“空/满”，因此满时返回 UART_RX_BUFFER_SIZE-1。
* @ingroup RingBuffer
*/
uint8_t uart_ring_buffer_available(void) {
/* 使用快照减少并发不一致窗口 */
uint8_t w = write_index;
uint8_t r = read_index;
return (uint8_t)((w + UART_RX_BUFFER_SIZE - r) % UART_RX_BUFFER_SIZE);
}
/**
* @brief 从环形缓冲区读取一个字节。
* @details 若缓冲区非空，返回队头字节并推进读指针；若为空，返回 -1。
* @return int 读取到的字节（0..255），或 -1 表示缓冲区为空。
* @ingroup RingBuffer
*/
int uart_ring_buffer_get(void) {
if (read_index == write_index) return -1; // 空
uint8_t data = uart_rx_buffer[read_index];
read_index = (read_index + 1) % UART_RX_BUFFER_SIZE;
return data;
}
/**
* @brief 向环形缓冲区写入一个字节。
* @details 尝试写入一个新字节；若缓冲区已满则丢弃并计数。
* @param data 待写入的字节。
* @return bool 是否写入成功。
* @retval true 写入成功。
* @retval false 写入失败（缓冲区已满，数据被丢弃并计数）。
* @note 如需“覆盖写入”策略，可在满时先推进读指针再写入。
* @ingroup RingBuffer
*/
bool uart_ring_buffer_put(uint8_t data) {
uint8_t next = (write_index + 1) % UART_RX_BUFFER_SIZE;
if (next != read_index) { // 缓冲区未满
uart_rx_buffer[write_index] = data;
write_index = next;
return true;
} else {
/* 缓冲区已满，丢弃新字节并计数 */
dropped_bytes++;
return false;
}
}
/**
* @brief 清空环形缓冲区。
* @details 复位读写索引与丢弃计数，相当于逻辑上丢弃所有已接收数据，不擦除数据区内容。
* @ingroup RingBuffer
*/
void uart_ring_buffer_clear(void) {
uart_ring_buffer_reset_state();
}
/**
* @brief 获取因满而被丢弃的字节累计数量。
* @details 写入时缓冲区满会丢弃新字节并累加计数；该计数在 init/clear 时清零。
* @return uint32_t 丢弃的累计字节数。
* @ingroup RingBuffer
*/
uint32_t uart_ring_buffer_drop_count(void) {
return dropped_bytes;
}

6
cmake/project_config.cmake
View File

@@ -1,5 +1,5 @@
# Project basic info
set(PROJECT_NAME "LDC1612")
set(PROJECT_NAME "gd32e23x")
set(VERSION_MAJOR 1)
set(VERSION_MINOR 0)
set(VERSION_PATCH 0)
@@ -7,8 +7,8 @@ set(VERSION "V${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_PATCH}")
string(TIMESTAMP BUILD_DATE "%Y-%m-%d")
# 编译条件（如IIC类型等）
set(IIC_TYPE "AutoDetectDriveCurrent")
# set(IIC_TYPE "HW-IIC")
# set(IIC_TYPE "AutoDetectDriveCurrent")
set(IIC_TYPE "HW-IIC")
# 其它自定义宏
add_definitions(-DIIC_TYPE=${IIC_TYPE})