test

inc/board_config.h

@@ -0,0 +1,44 @@
+//
+// Created by dell on 24-12-28.
+//
+
+#ifndef BOARD_CONFIG_H
+#define BOARD_CONFIG_H
+
+#define SOFTWARE_IIC
+
+// #define DEBUG_VERBOES
+
+/******************************************************************************/
+
+#define RCU_GPIO_I2C         RCU_GPIOF
+#define RCU_I2C              RCU_I2C0
+#define I2C_SCL_PORT         GPIOF
+#define I2C_SCL_PIN          GPIO_PIN_1
+#define I2C_SDA_PORT         GPIOF
+#define I2C_SDA_PIN          GPIO_PIN_0
+#define I2C_GPIO_AF          GPIO_AF_1
+
+/******************************************************************************/
+
+#define RS485_RCU            RCU_USART0
+#define RS485_GPIO_RCU       RCU_GPIOA
+#define RS485_GPIO_PORT      GPIOA
+#define RS485_TX_PIN         GPIO_PIN_2
+#define RS485_RX_PIN         GPIO_PIN_3
+#define RS485_PHY            USART0
+#define RS485_BAUDRATE       115200U
+#define RS485_EN_PIN         GPIO_PIN_1
+
+/******************************************************************************/
+
+#define LED_PORT             GPIOA
+#define LED_PIN              GPIO_PIN_7
+#define LED_RCU              RCU_GPIOA
+#define LED_BLINK_TIMER_RCU  RCU_TIMER16
+#define LED_BLINK_TIMER      TIMER16
+#define LED_BLINK_IRQ        TIMER16_IRQn
+
+/******************************************************************************/
+
+#endif //BOARD_CONFIG_H

inc/fwdgt.h

@@ -0,0 +1,15 @@
+//
+// Created by yelv1 on 24-12-29.
+//
+
+#ifndef FWDGT_H
+#define FWDGT_H
+
+#include "gd32e23x.h"
+#include "board_config.h"
+
+void watchdog_init(void);
+
+void fwdgt_reset_mcu(void);
+
+#endif //FWDGT_H

inc/i2c.h

@@ -0,0 +1,48 @@
+//
+// Created by dell on 24-12-20.
+//
+
+#ifndef I2C_H
+#define I2C_H
+
+#include "gd32e23x_it.h"
+#include "gd32e23x.h"
+#include "systick.h"
+#include "main.h"
+
+#include "board_config.h"
+
+/******************************************************************************/
+
+#define I2C_SPEED       20000
+
+#define I2C_TIME_OUT    (uint16_t)(5000)
+#define I2C_OK          1
+#define I2C_FAIL        0
+#define I2C_END         1
+
+/******************************************************************************/
+
+typedef enum {
+    I2C_START = 0,
+    I2C_SEND_ADDRESS,
+    I2C_CLEAR_ADDRESS_FLAG,
+    I2C_TRANSMIT_DATA,
+    I2C_STOP
+} i2c_process_enum;
+
+/******************************************************************************/
+
+void i2c_gpio_config(void);
+
+void i2c_config(void);
+
+void i2c_bus_reset(void);
+
+void i2c_scan(void);
+
+uint8_t i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]);
+
+uint8_t i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data);
+
+#endif //I2C_H

inc/led.h

@@ -0,0 +1,13 @@
+//
+// Created by dell on 24-12-20.
+//
+
+#ifndef LED_H
+#define LED_H
+
+#include "gd32e23x_it.h"
+#include "board_config.h"
+
+void led_config(void);
+
+#endif //LED_H

inc/main.h

@@ -35,4 +35,20 @@ OF SUCH DAMAGE.
 #ifndef MAIN_H
 #define MAIN_H
 
+#include <stdio.h>
+#include "gd32e23x.h"
+#include "systick.h"
+#include "gd32e23x_libopt.h"
+#include "rs485.h"
+#include "led.h"
+#include "fwdgt.h"
+#include "board_config.h"
+
+#ifdef SOFTWARE_IIC
+#include "soft_i2c.h"
+#else
+#include "i2c.h"
+#endif
+
+
 #endif /* MAIN_H */

inc/peripheral.h

@@ -1,11 +0,0 @@
-//
-// Created by yelv1 on 24-9-22.
-//
-
-#ifndef PERIPHERAL_H
-#define PERIPHERAL_H
-
-void usart_config(void);
-void led_blink_config(void);
-
-#endif //PERIPHERAL_H

inc/rs485.h

@@ -0,0 +1,22 @@
+//
+// Created by dell on 24-12-3.
+//
+
+#ifndef RS485_H
+#define RS485_H
+
+#include "gd32e23x_it.h"
+#include "gd32e23x.h"
+#include "board_config.h"
+
+/******************************************************************************/
+
+#define RX_BUFFER_SIZE            32
+
+/******************************************************************************/
+
+void usart_config(void);
+
+void rs485_config(void);
+
+#endif //RS485_H

inc/soft_i2c.h

@@ -0,0 +1,53 @@
+//
+// Created by dell on 24-12-28.
+//
+
+#ifndef SOFT_I2C_H
+#define SOFT_I2C_H
+
+#include "gd32e23x_it.h"
+#include "gd32e23x.h"
+#include "systick.h"
+#include "main.h"
+
+#include "board_config.h"
+
+/******************************************************************************/
+
+#define I2C_SCL_HIGH()      gpio_bit_set(I2C_SCL_PORT, I2C_SCL_PIN)
+#define I2C_SCL_LOW()       gpio_bit_reset(I2C_SCL_PORT, I2C_SCL_PIN)
+#define I2C_SDA_HIGH()      gpio_bit_set(I2C_SDA_PORT, I2C_SDA_PIN)
+#define I2C_SDA_LOW()       gpio_bit_reset(I2C_SDA_PORT, I2C_SDA_PIN)
+#define I2C_SDA_READ()      gpio_input_bit_get(I2C_SDA_PORT, I2C_SDA_PIN)
+
+/******************************************************************************/
+
+#define SOFT_I2C_OK          1
+#define SOFT_I2C_FAIL        0
+#define SOFT_I2C_END         1
+
+/******************************************************************************/
+
+void soft_i2c_delay(void);
+
+void soft_i2c_config(void);
+
+void soft_i2c_start(void);
+
+void soft_i2c_stop(void);
+
+void soft_i2c_send_ack(void);
+
+void soft_i2c_send_nack(void);
+
+uint8_t soft_i2c_wait_ack(void);
+
+void soft_i2c_send_byte(uint8_t data);
+
+uint8_t soft_i2c_receive_byte(uint8_t ack);
+
+uint8_t soft_i2c_write_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t data[2]);
+
+uint8_t soft_i2c_read_16bits(uint8_t slave_addr, uint8_t reg_addr, uint8_t *data);
+
+#endif //SOFT_I2C_H