//
// Created by dell on 24-9-23.
//

#include "ultrasonic_driver.h"
#include "gd32e23x.h"
#include "systick.h"

void led_config(void)
{
    rcu_periph_clock_enable(LED_RCU);

    gpio_mode_set(LED_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, LED_PIN);
    gpio_output_options_set(LED_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, LED_PIN);
    gpio_bit_write(LED_PORT, LED_PIN, SET);

    rcu_periph_clock_enable(LED_TIMER_RCU);
    timer_deinit(LED_TIMER);

    timer_parameter_struct timer_initpara;
    timer_struct_para_init(&timer_initpara);
    timer_initpara.prescaler = 7199;
    timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
    timer_initpara.counterdirection = TIMER_COUNTER_UP;
    timer_initpara.period = 999;
    timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
    timer_init(LED_TIMER, &timer_initpara);

    timer_auto_reload_shadow_enable(LED_TIMER);
    timer_interrupt_enable(LED_TIMER, TIMER_INT_UP);

    timer_enable(LED_TIMER);

    nvic_irq_enable(LED_IRQ, 0);
}

void usart_config(void)
{
    rcu_periph_clock_enable(USART_GPIO_RCU);
    rcu_periph_clock_enable(USART_RCU);

    gpio_af_set(USART_GPIO_PORT, GPIO_AF_1, GPIO_PIN_2 | GPIO_PIN_3);

    /* configure USART Tx&Rx as alternate function push-pull */
    gpio_mode_set(USART_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_PULLUP, USART_TX_PIN | USART_RX_PIN);
    gpio_output_options_set(USART_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, USART_TX_PIN | USART_RX_PIN);

    /* configure RS485 EN Pin */
    gpio_mode_set(USART_GPIO_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, USART_EN_PIN);
    gpio_output_options_set(USART_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, USART_EN_PIN);
    gpio_bit_write(USART_GPIO_PORT, USART_EN_PIN, SET);

    /* USART configure */
    usart_deinit(USART0_PHY);
    usart_baudrate_set(USART0_PHY, USART_BAUDRATE);
    usart_receive_config(USART0_PHY, USART_RECEIVE_ENABLE);
    usart_transmit_config(USART0_PHY, USART_TRANSMIT_ENABLE);

    usart_enable(USART0_PHY);

    nvic_irq_enable(USART0_IRQn, 0);
    usart_interrupt_enable(USART0_PHY, USART_INT_RBNE);
}

void UltraSonic_GPIO_Config(void)
{
    rcu_periph_clock_enable(US_TRAN_GPIO_RCU);

    gpio_mode_set(US_TRAN_GPIO_PORT, GPIO_MODE_AF, GPIO_PUPD_NONE, US_TRAN_PIN);
    gpio_output_options_set(US_TRAN_GPIO_PORT, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, US_TRAN_PIN);
    gpio_af_set(US_TRAN_GPIO_PORT, US_TRAN_AF, US_TRAN_PIN);

    timer_oc_parameter_struct timer_ocinitpara;
    timer_parameter_struct timer_initpara;

    rcu_periph_clock_enable(US_TRAN_RCU);
    timer_deinit(US_TRAN_TIMER);

    timer_struct_para_init(&timer_initpara);
    timer_initpara.prescaler = 0;
    timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
    timer_initpara.counterdirection = TIMER_COUNTER_UP;
    timer_initpara.period = 239;
    timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
    timer_init(US_TRAN_TIMER, &timer_initpara);

    timer_channel_output_struct_para_init(&timer_ocinitpara);
    timer_ocinitpara.outputstate = TIMER_CCX_ENABLE;
    timer_ocinitpara.outputnstate = TIMER_CCXN_DISABLE;
    timer_ocinitpara.ocpolarity = TIMER_OC_POLARITY_HIGH;
    timer_ocinitpara.ocnpolarity = TIMER_OCN_POLARITY_HIGH;
    timer_ocinitpara.ocidlestate = TIMER_OC_IDLE_STATE_LOW;
    timer_ocinitpara.ocnidlestate = TIMER_OCN_IDLE_STATE_LOW;
    timer_channel_output_config(US_TRAN_TIMER, US_TRAN_CH, &timer_ocinitpara);

    timer_channel_output_pulse_value_config(US_TRAN_TIMER, US_TRAN_CH, 120);
    timer_channel_output_mode_config(US_TRAN_TIMER, US_TRAN_CH, TIMER_OC_MODE_PWM0);
    timer_auto_reload_shadow_enable(US_TRAN_TIMER);

    timer_interrupt_enable(US_TRAN_TIMER, TIMER_INT_UP);
}

void UltraSonic_Transmit_Config(void)
{
    led_config();
    usart_config();
    UltraSonic_GPIO_Config();
}

void UltraSonic_PwmOut_Cycles(const uint8_t cycles)
{
    uint8_t current_cycle = 0;

    timer_channel_output_pulse_value_config(US_TRAN_TIMER, US_TRAN_CH, 120);
    timer_channel_output_mode_config(US_TRAN_TIMER, US_TRAN_CH, TIMER_OC_MODE_PWM1);
    timer_enable(US_TRAN_TIMER);

    timer_enable(TIMER15);

    while (current_cycle < cycles)
    {
        while (!timer_interrupt_flag_get(US_TRAN_TIMER, TIMER_INT_FLAG_UP));
        timer_interrupt_flag_clear(US_TRAN_TIMER, TIMER_INT_FLAG_UP);
        current_cycle++;
    }
    // delay_nop();
    timer_disable(US_TRAN_TIMER);
    // if(gpio_output_bit_get(GPIOB, GPIO_PIN_1) == SET)
    // {
    //     gpio_bit_reset(GPIOB, GPIO_PIN_1);
    // }
}

void UltraSonic_Transmit_Delay(const uint16_t micro_second)
{
    rcu_periph_clock_enable(US_TRAN_DELAY_RCU);
    timer_deinit(US_TRAN_DELAY_TIMER);

    timer_parameter_struct timer_initpara;
    timer_struct_para_init(&timer_initpara);
    timer_initpara.prescaler = 71;
    timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
    timer_initpara.counterdirection = TIMER_COUNTER_UP;
    timer_initpara.period = micro_second - 1;
    timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
    timer_initpara.repetitioncounter = 0;
    timer_init(US_TRAN_DELAY_TIMER, &timer_initpara);

    timer_auto_reload_shadow_enable(US_TRAN_DELAY_TIMER);
    timer_interrupt_enable(US_TRAN_DELAY_TIMER, TIMER_INT_UP);
    nvic_irq_enable(TIMER15_IRQn, 1U);
}

void UltraSonic_ReceExti_Config(void)
{
    rcu_periph_clock_enable(US_FB_GPIO_RCU);
    rcu_periph_clock_enable(US_FB_EXTI_RCU);

    gpio_mode_set(US_FB_GPIO_PORT, GPIO_MODE_INPUT, GPIO_PUPD_NONE, US_FB_GPIO_PIN);
    nvic_irq_enable(US_FB_EXTI_IRQ, 0U);
    syscfg_exti_line_config(EXTI_SOURCE_GPIOA, EXTI_SOURCE_PIN0);

    exti_init(US_FB_GPIO_EXTI, EXTI_INTERRUPT, EXTI_TRIG_FALLING);
    exti_flag_clear(US_FB_GPIO_EXTI);

    // exti_interrupt_enable(EXTI_0);
}

void UltraSonic_EchoTimer_Config(void)
{
    rcu_periph_clock_enable(US_ECHO_RCU);
    timer_deinit(US_ECHO_TIMER);

    timer_parameter_struct timer_initpara;
    timer_struct_para_init(&timer_initpara);
    timer_initpara.prescaler = 71;
    timer_initpara.alignedmode = TIMER_COUNTER_EDGE;
    timer_initpara.counterdirection = TIMER_COUNTER_UP;
    timer_initpara.period = 59999;
    timer_initpara.clockdivision = TIMER_CKDIV_DIV1;
    timer_initpara.repetitioncounter = 0;
    timer_init(US_ECHO_TIMER, &timer_initpara);

    timer_ic_parameter_struct timer_icinitpara;
    timer_channel_input_struct_para_init(&timer_icinitpara);
    timer_icinitpara.icpolarity = TIMER_IC_POLARITY_BOTH_EDGE;
    timer_icinitpara.icselection = TIMER_IC_SELECTION_INDIRECTTI;
    timer_icinitpara.icprescaler = TIMER_IC_PSC_DIV1;
    timer_icinitpara.icfilter = 0x03;
    timer_input_capture_config(US_ECHO_TIMER, US_ECHO_CH, &timer_icinitpara);
}

void UltraSonic_Receive_Config(void)
{
    UltraSonic_Transmit_Delay(TIME_CORRECTION_US);
    UltraSonic_ReceExti_Config();
    UltraSonic_EchoTimer_Config();
}

uint16_t UltraSonic_CalcDistance(uint32_t us_value)
{
    uint16_t distace = (TIME_CORRECTION_US + us_value) * 17;
    /*
     *  (TIME_CORRECTION_US + us_value) * 340 m/s
     *  -----------------------------------------
     *                  1000 000
     *  ----------------------------------------------
     *                          2
     */
    return distace;
}