//
// Created by dell on 24-12-3.
//

#ifndef LDC1612_H
#define LDC1612_H

#include "gd32e23x_it.h"
#include "gd32e23x.h"
#include "systick.h"
#include <stdbool.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <math.h>

#define LDC1612_ADDR         (0x2B << 1)

/*Register Rddr*/
/***************************************************************************/
#define CONVERTION_RESULT_REG_START             0X00
#define SET_CONVERSION_TIME_REG_START           0X08
#define SET_CONVERSION_OFFSET_REG_START         0X0C
#define SET_LC_STABILIZE_REG_START              0X10
#define SET_FREQ_REG_START                      0X14

#define SENSOR_STATUS_REG                       0X18
#define ERROR_CONFIG_REG                        0X19
#define SENSOR_CONFIG_REG                       0X1A
#define MUL_CONFIG_REG                          0X1B
#define SENSOR_RESET_REG                        0X1C
#define SET_DRIVER_CURRENT_REG                  0X1E

#define READ_MANUFACTURER_ID                    0X7E
#define READ_DEVICE_ID                          0X7F

/******************************************************************************/

#define CHANNEL_0  0
#define CHANNEL_1  1

/******************************************************************************/

#define LDC1612_CONVERSION_TIME_CH0        0X0546  //0536
#define LDC1612_DRIVE_CURRENT              0X9000  //A000
#define LDC1612_MUX_CONFIG                 0X020C  // no auto scan and filter bandwidth 3.3MHz
#define LDC1612_SENSOR_CONFIG              0X1601
#define LDC1612_ERROR_CONFIG               0x0000
#define LC_STABILIZE_TIME_CH0              0X001E //30

/******************************************************************************/

#define COIL_RP_KOM  15.727
#define COIL_L_UH    33
#define COIL_C_PF    150
#define COIL_Q_FACTOR  35.97

typedef enum {
    I2C_START = 0,
    I2C_SEND_ADDRESS,
    I2C_CLEAR_ADDRESS_FLAG,
    I2C_TRANSMIT_DATA,
    I2C_STOP
} i2c_process_enum;

#define I2C_TIME_OUT    (uint16_t)(10000)
#define I2C_OK          1
#define I2C_FAIL        0
#define I2C_END         1

#define I2C_SPEED 20000
#define RCU_GPIO_I2C RCU_GPIOF
#define RCU_I2C RCU_I2C0
#define I2C_SCL_PORT GPIOF
#define I2C_SCL_PIN GPIO_PIN_1
#define I2C_SDA_PORT GPIOF
#define I2C_SDA_PIN GPIO_PIN_0
#define I2C_GPIO_AF GPIO_AF_1

void i2c_gpio_config(void);

void i2c_config(void);

void i2c_bus_reset(void);

void i2c_scan(void);

void ldc1612_set_conversion_time(uint8_t channel, uint16_t result);

void ldc1612_set_conversion_offset(uint8_t channel, uint16_t result);

void ldc1612_set_LC_stabilize_time(uint8_t channel, uint16_t result);

void ldc1612_set_freq_divide(uint8_t channel);

void ldc1612_set_error_config(uint16_t value);

void ldc1612_set_mux_config(uint16_t value);

void ldc1612_reset_sensor(void);

void ldc1612_set_drive_current(uint8_t channel, uint16_t value);

void ldc1612_set_sensor_config(uint16_t value);

void ldc1612_single_ch0_config(void);

void ldc1612_iic_get_sensor_infomation(void);

uint16_t ldc1612_get_manufacturer_id(void);

uint16_t ldc1612_get_deveice_id(void);

uint32_t ldc1612_get_raw_channel_result(uint8_t channel);

uint32_t ldc1612_parse_raw_result(uint32_t raw_result);

uint8_t ldc1612_iic_read_16bits(uint8_t reg_addr, uint8_t *data);

uint8_t ldc1612_iic_write_16bits(uint8_t reg_addr, uint8_t data[2]);

#endif //LDC1612_H