//
// Created by dell on 24-12-3.
//

#ifndef LDC1612_H
#define LDC1612_H

#include "gd32e23x_it.h"
#include "gd32e23x.h"
#include "systick.h"
#include <stdbool.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>

#define LDC1612_ADDR         (0x2B << 1)

/*Register Rddr*/
/***************************************************************************/
#define CONVERTION_RESULT_REG_START             0X00
#define SET_CONVERSION_TIME_REG_START           0X08
#define SET_CONVERSION_OFFSET_REG_START         0X0C
#define SET_LC_STABILIZE_REG_START              0X10
#define SET_FREQ_REG_START                      0X14

#define SENSOR_STATUS_REG                       0X18
#define ERROR_CONFIG_REG                        0X19
#define SENSOR_CONFIG_REG                       0X1A
#define MUL_CONFIG_REG                          0X1B
#define SENSOR_RESET_REG                        0X1C
#define SET_DRIVER_CURRENT_REG                  0X1E

#define READ_MANUFACTURER_ID                    0X7E
#define READ_DEVICE_ID                          0X7F

/******************************************************************************/


typedef enum {
    I2C_START = 0,
    I2C_SEND_ADDRESS,
    I2C_CLEAR_ADDRESS_FLAG,
    I2C_TRANSMIT_DATA,
    I2C_STOP
} i2c_process_enum;

#define I2C_SPEED 100000
#define RCU_IR_GPIO RCU_GPIOF
#define RCU_I2C RCU_I2C0
#define I2C_SCL_PORT GPIOF
#define I2C_SCL_PIN GPIO_PIN_1
#define I2C_SDA_PORT GPIOF
#define I2C_SDA_PIN GPIO_PIN_0
#define I2C_GPIO_AF GPIO_AF_1

#define I2C_TIME_OUT    (uint16_t)(10000)

void I2C_config(void);
void I2C_scan(void);

int LDC1612_IIC_read_16bits(uint8_t reg, uint16_t *data);



#endif //LDC1612_H