ultrasonic_cmake_vscode/Src/gd32e23x_it.c

/*!
    \file    gd32e23x_it.c
    \brief   interrupt service routines
    
    \version 2025-02-10, V2.4.0, demo for GD32E23x
*/

/*
    Copyright (c) 2025, GigaDevice Semiconductor Inc.

    Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:

    1. Redistributions of source code must retain the above copyright notice, this 
       list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright notice, 
       this list of conditions and the following disclaimer in the documentation 
       and/or other materials provided with the distribution.
    3. Neither the name of the copyright holder nor the names of its contributors 
       may be used to endorse or promote products derived from this software without 
       specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGE.
*/

#include "gd32e23x_it.h"
#include "systick.h"
#include "uart.h"
#include "uart_ring_buffer.h"
#include "led.h"
#include "ultrasonic_analog.h"

/*!
    \brief      this function handles NMI exception
    \param[in]  none
    \param[out] none
    \retval     none
*/
void NMI_Handler(void)
{
    /* if NMI exception occurs, go to infinite loop */
    while(1) {
    }
}

/*!
    \brief      this function handles HardFault exception
    \param[in]  none
    \param[out] none
    \retval     none
*/
void HardFault_Handler(void)
{
    /* if Hard Fault exception occurs, go to infinite loop */
    while(1) {
    }
}

/*!
    \brief      this function handles SVC exception
    \param[in]  none
    \param[out] none
    \retval     none
*/
void SVC_Handler(void)
{
    /* if SVC exception occurs, go to infinite loop */
    while(1) {
    }
}

/*!
    \brief      this function handles PendSV exception
    \param[in]  none
    \param[out] none
    \retval     none
*/
void PendSV_Handler(void)
{
    /* if PendSV exception occurs, go to infinite loop */
    while(1) {
    }
}

/*!
    \brief      this function handles SysTick exception
    \param[in]  none
    \param[out] none
    \retval     none
*/
void SysTick_Handler(void) {
    led_heart_beat();  // LED心跳指示灯
    delay_decrement();
}

void TIMER16_IRQHandler(void) {
    // 处理通道0比较中断（240us时触发）
    if (timer_interrupt_flag_get(TIMER16, TIMER_INT_FLAG_CH0)) {
        timer_interrupt_flag_clear(TIMER16, TIMER_INT_FLAG_CH0);
        
        // 在240us时执行的操作
        g_ultrasonic_measure_done = true; // 设置测量完成标志
        
        // TODO: 在这里可以执行其他240us时需要的操作
        // 例如：启动其他定时器、设置GPIO、记录时间戳等
    }

    // 处理重装载中断（1000us时触发，即超时）
    if (timer_interrupt_flag_get(TIMER16, TIMER_INT_FLAG_UP)) {
        timer_interrupt_flag_clear(TIMER16, TIMER_INT_FLAG_UP);
        
        // 达到最大时间（1ms），自动关闭定时器
        timer_disable(TIMER16);
        
        // TODO: 超时处理逻辑
        // 如果需要，可以在这里设置超时标志或执行其他清理操作
    }
}

/**
  * @brief  This function handles external lines 0 to 1 interrupt request
  * @param[in]  none
  * @param[out] none
  * @retval None
  */
void EXTI0_1_IRQHandler(void) {
    if (exti_interrupt_flag_get(US_RX_GPIO_EXTI) == SET)
    {
        exti_interrupt_flag_clear(US_RX_GPIO_EXTI);
        // g_capture_value = timer_channel_capture_value_register_read(US_ECHO_TIMER, US_ECHO_CH);
        
        timer_disable(US_ECHO_TIMER);
        exti_interrupt_disable(US_RX_GPIO_EXTI);
    }
}


/* PWM周期计数器 - 使用ULTRASONIC_TX_CYCLES宏 */
volatile uint8_t pwm_cycle_count = 0;

void TIMER13_IRQHandler(void)
{
    if(SET == timer_interrupt_flag_get(TIMER13, TIMER_INT_FLAG_UP)) {
        timer_interrupt_flag_clear(TIMER13, TIMER_INT_FLAG_UP);
        pwm_cycle_count++;

        if(pwm_cycle_count >= (ULTRASONIC_TX_CYCLES)) {
            timer_disable(TIMER13);
            pwm_cycle_count = 0;
            // g_ultrasonic_measure_done = true; // 注释掉，现在由TIMER16在240us时设置
        }
        
    }
}

void USART0_IRQHandler(void) {
    if (RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE)) {
        uint8_t data = usart_data_receive(USART0);
        (void)uart_ring_buffer_put(data); // 缓冲满时丢弃，返回值可用于统计
    }
}