feat(flash-gui): 单列布局重构 — 日志上移至操作上方, 补齐/拼接改顶栏弹窗

FlashTool/README.md

@@ -9,7 +9,7 @@
 >   （Windows 10/11 x64，免安装、无需 Python，**内置 OpenOCD 工具链**）。
 > - **要改代码/重新打包**：见 §5、§6。
 >
-> 界面与构建方式对齐 DLPilot 项目（CustomTkinter 深色双栏仪表盘 +
+> 界面与构建方式对齐 DLPilot 项目（CustomTkinter 深色卡片仪表盘 +
 > PyInstaller onefile + Gitea Release 发布）。更新：2026-09-14
 
 ## 1. 功能总览
@@ -46,13 +46,15 @@ DAPLinkFlash/
 
 ## 3. GUI 使用
 
-主窗口为双栏仪表盘：
+主窗口为单列仪表盘，补齐/拼接经顶栏按钮弹出独立窗口：
 
 ```
-左列                                      右列
-┌ 探针与工具链 [自动定位] ┐              ┌ 补齐 (Pad) — Y-Modem 对齐   ┐
-├ 芯片与固件（型号/固件/基地址）┤        ├ 拼接 (Merge) — BL+APP+标志  ┤
-└ 操作: 检测/烧录/擦除/读取/复位/停止 ┘   └ 运行日志 — OpenOCD 输出     ┘
+顶栏  DAPLink Flash [补齐 (Pad)] [拼接 (Merge)]     关于  Dark/Light/System
+┌ 探针与工具链 [自动定位]                     ┐
+├ 芯片与固件（型号/固件/基地址）               ┤
+├ 运行日志 — OpenOCD 输出                     ┤
+└ 操作: 检测/烧录/擦除/读取/复位/停止          ┘
+弹窗  补齐 (Pad) / 拼接 (Merge) — 非模态, 配置与主窗口共享
 ```
 
 1. **选工具链**：默认自动定位（内置 → 本机 `D:/toolchain` → PATH），左卡右上
@@ -62,7 +64,7 @@ DAPLinkFlash/
 3. **选固件**：点"浏览"选 BIN/HEX/ELF；BIN 确认基地址（完整镜像 `0x08000000`，
    单独 APP `0x08002000`）；
 4. **点"检测设备"**确认链路通 → **点"烧录固件"**；输出实时显示在右下日志区；
-5. **固件工具**（右列）：
+5. **固件工具**（顶栏按钮弹出的独立窗口，非模态）：
    - 补齐：选输入 BIN 后输出名自动带出（`*_pad.bin`），对齐默认 1K，点"执行补齐"；
    - 拼接：选 Bootloader 与 APP 后输出名自动带出（`*_BL.bin`），地址按典型布局
      预填，点"执行拼接"。

FlashTool/src/app_gui.py

@@ -33,7 +33,7 @@ BOLD = ('Microsoft YaHei UI', 13, 'bold')
 TITLE_FONT = ('Microsoft YaHei UI', 18, 'bold')
 
 APP_NAME = 'DAPLink Flash'
-APP_VERSION = '2.0.0'
+APP_VERSION = '2.1.0'
 REPO_URL = 'https://gitea.hulk.wang/hulk/gd32e230f8_firmware_merge_tool'
 
 OK_BLUE = '#3B8ED0'
@@ -73,8 +73,8 @@ class App(ctk.CTk):
                 'hulk.DAPLinkFlash')
         except Exception:
             pass
-        self.geometry('1360x880')
-        self.minsize(1200, 780)
+        self.geometry('960x950')
+        self.minsize(860, 800)
         ic = get_icon_path()
         if ic:
             try:
@@ -99,6 +99,8 @@ class App(ctk.CTk):
         self.proc = None
         self._poll_job = None
         self._op_buttons = []
+        self.v_pad_result = tk.StringVar(value='')
+        self.v_merge_result = tk.StringVar(value='')
 
         self._build()
         self._log(f'{APP_NAME} v{APP_VERSION} — OpenOCD 烧录 · 固件补齐 · 镜像拼接')
@@ -138,8 +140,13 @@ class App(ctk.CTk):
         top = ctk.CTkFrame(self, fg_color='transparent')
         top.pack(fill='x', padx=12, pady=(10, 2))
         ctk.CTkLabel(top, text=APP_NAME, font=TITLE_FONT).pack(side='left')
-        ctk.CTkLabel(top, text='GD32 固件烧录 · 补齐 · 镜像拼接',
+        ctk.CTkLabel(top, text='GD32 固件烧录',
                      text_color='gray60').pack(side='left', padx=10, pady=(6, 0))
+        ctk.CTkButton(top, text='补齐 (Pad)', width=88, height=26,
+                      command=self._open_pad_dialog).pack(side='left', padx=(16, 6),
+                                                          pady=(4, 0))
+        ctk.CTkButton(top, text='拼接 (Merge)', width=100, height=26,
+                      command=self._open_merge_dialog).pack(side='left', pady=(4, 0))
         seg = ctk.CTkSegmentedButton(top, values=['Dark', 'Light', 'System'],
                                      command=self._set_appearance)
         seg.set('System')
@@ -152,15 +159,9 @@ class App(ctk.CTk):
 
         body = ctk.CTkFrame(self, fg_color='transparent')
         body.pack(fill='both', expand=True, padx=12, pady=(4, 12))
-        body.grid_columnconfigure(0, weight=1, uniform='col')
-        body.grid_columnconfigure(1, weight=1, uniform='col')
-        body.grid_rowconfigure(0, weight=1)
-        left = ctk.CTkFrame(body, fg_color='transparent')
-        left.grid(row=0, column=0, sticky='nsew')
-        right = ctk.CTkFrame(body, fg_color='transparent')
-        right.grid(row=0, column=1, sticky='nsew', padx=(10, 0))
-        self._build_left(left)
-        self._build_right(right)
+        body.grid_rowconfigure(2, weight=1)   # 运行日志吃掉剩余高度
+        body.grid_columnconfigure(0, weight=1)
+        self._build_main(body)
 
         status = ctk.CTkFrame(self, fg_color='transparent')
         status.pack(fill='x', padx=14, pady=(0, 8))
@@ -169,9 +170,9 @@ class App(ctk.CTk):
         ctk.CTkLabel(status, text=f'v{APP_VERSION}',
                      text_color='gray60').pack(side='right')
 
-    # -- 左列: 探针与工具链 / 芯片与固件 / 操作 --
-    def _build_left(self, col):
-        col.grid_rowconfigure(2, weight=1)   # 操作卡片吸底
+    # -- 主列: 探针与工具链 / 芯片与固件 / 运行日志 / 操作 --
+    def _build_main(self, col):
+        col.grid_rowconfigure(2, weight=1)   # 日志卡片吃掉剩余高度
         col.grid_columnconfigure(0, weight=1)
 
         self.v_toolchain = tk.StringVar(
@@ -218,8 +219,15 @@ class App(ctk.CTk):
                             checkbox_width=18, checkbox_height=18).pack(
                 side='left', padx=(0, 14))
 
+        card, c = self._card(col, '运行日志 — OpenOCD 输出与固件工具结果',
+                             button='清空', command=self._clear_log)
+        card.grid(row=2, column=0, sticky='nsew', pady=(10, 0))
+        self.txt_log = ctk.CTkTextbox(c, font=MONO)
+        self.txt_log.pack(fill='both', expand=True)
+        self.txt_log.configure(state='disabled')
+
         card, c = self._card(col, '操作')
-        card.grid(row=2, column=0, sticky='sew', pady=(10, 0))
+        card.grid(row=3, column=0, sticky='ew', pady=(10, 0))
         grid = ctk.CTkFrame(c, fg_color='transparent')
         grid.pack(fill='x')
         grid.grid_columnconfigure((0, 1, 2), weight=1, uniform='op')
@@ -235,18 +243,30 @@ class App(ctk.CTk):
                                       command=self._on_stop, state='disabled')
         self.btn_stop.grid(row=1, column=2, sticky='ew', padx=3, pady=3)
 
-    # -- 右列: 补齐 / 拼接 / 日志 --
-    def _build_right(self, col):
-        col.grid_rowconfigure(2, weight=1)   # 日志卡片吃掉剩余高度
-        col.grid_columnconfigure(0, weight=1)
+    # ============================================================
+    #  固件工具弹窗: 补齐 / 拼接
+    # ============================================================
+    def _center_dialog(self, dlg, w, h):
+        """弹窗叠在主窗口中上部"""
+        dlg.update_idletasks()
+        x = self.winfo_rootx() + max(0, (self.winfo_width() - w) // 2)
+        y = self.winfo_rooty() + max(0, (self.winfo_height() - h) // 4)
+        dlg.geometry(f'{w}x{h}+{x}+{y}')
 
-        card, c = self._card(col, '补齐 (Pad) — 尾部补 0xFF 到页边界, '
-                                     '适配 Bootloader Y-Modem 整包接收')
-        card.grid(row=0, column=0, sticky='ew')
-        self._field(c, '输入 BIN', self.v['pad_in'], self._browse_pad_in)
-        self._field(c, '输出 BIN', self.v['pad_out'], self._browse_pad_out)
-        row = ctk.CTkFrame(c, fg_color='transparent')
-        row.pack(fill='x', pady=(6, 0))
+    def _open_pad_dialog(self):
+        dlg = ctk.CTkToplevel(self)
+        dlg.title('固件工具 — 补齐 (Pad)')
+        dlg.resizable(False, False)
+        dlg.transient(self)
+        box = ctk.CTkFrame(dlg, fg_color='transparent')
+        box.pack(fill='both', expand=True, padx=18, pady=(14, 12))
+        ctk.CTkLabel(box, text='补齐 (Pad)', font=BOLD, anchor='w').pack(fill='x')
+        ctk.CTkLabel(box, text='尾部补 0xFF 到页边界, 适配 Bootloader Y-Modem 整包接收',
+                     text_color='gray60', anchor='w').pack(fill='x', pady=(0, 6))
+        self._field(box, '输入 BIN', self.v['pad_in'], self._browse_pad_in)
+        self._field(box, '输出 BIN', self.v['pad_out'], self._browse_pad_out)
+        row = ctk.CTkFrame(box, fg_color='transparent')
+        row.pack(fill='x', pady=(8, 0))
         ctk.CTkLabel(row, text='对齐:', width=40, anchor='e').pack(side='left')
         ctk.CTkComboBox(row, width=86, state='readonly',
                         values=['1024', '2048', '4096'],
@@ -256,17 +276,27 @@ class App(ctk.CTk):
                      ).pack(side='left', padx=(4, 12))
         ctk.CTkButton(row, text='执行补齐', width=96,
                       command=self._on_pad).pack(side='left')
-        self.v_pad_result = tk.StringVar(value='')
-        ctk.CTkLabel(c, textvariable=self.v_pad_result, text_color=OK_BLUE,
-                     justify='left', anchor='w').pack(fill='x', pady=(4, 0))
+        ctk.CTkLabel(box, textvariable=self.v_pad_result, text_color=OK_BLUE,
+                     justify='left', anchor='w').pack(fill='x', pady=(8, 0))
+        ctk.CTkLabel(box, text='Bootloader 的 Y-Modem 按 1K 整包接收, OTA 升级包发送前先补齐',
+                     text_color='gray50', anchor='w').pack(fill='x', pady=(2, 0))
+        self._center_dialog(dlg, 680, 300)
 
-        card, c = self._card(col, '拼接 (Merge) — Bootloader + APP + 有效标志 → 整片镜像')
-        card.grid(row=1, column=0, sticky='ew', pady=(10, 0))
-        self._field(c, 'Bootloader', self.v['bootloader'], self._browse_bl)
-        self._field(c, 'Application', self.v['app'], self._browse_app)
-        self._field(c, '输出文件', self.v['merge_out'], self._browse_merge_out)
-        row = ctk.CTkFrame(c, fg_color='transparent')
-        row.pack(fill='x', pady=(6, 0))
+    def _open_merge_dialog(self):
+        dlg = ctk.CTkToplevel(self)
+        dlg.title('固件工具 — 拼接 (Merge)')
+        dlg.resizable(False, False)
+        dlg.transient(self)
+        box = ctk.CTkFrame(dlg, fg_color='transparent')
+        box.pack(fill='both', expand=True, padx=18, pady=(14, 12))
+        ctk.CTkLabel(box, text='拼接 (Merge)', font=BOLD, anchor='w').pack(fill='x')
+        ctk.CTkLabel(box, text='Bootloader + APP + 有效标志 → 整片 Flash 镜像',
+                     text_color='gray60', anchor='w').pack(fill='x', pady=(0, 6))
+        self._field(box, 'Bootloader', self.v['bootloader'], self._browse_bl)
+        self._field(box, 'Application', self.v['app'], self._browse_app)
+        self._field(box, '输出文件', self.v['merge_out'], self._browse_merge_out)
+        row = ctk.CTkFrame(box, fg_color='transparent')
+        row.pack(fill='x', pady=(8, 0))
         for label, key, w in (('APP 地址', 'app_addr', 104),
                               ('标志地址', 'flag_addr', 104),
                               ('Flash', 'merge_flash', 84),
@@ -274,22 +304,14 @@ class App(ctk.CTk):
             ctk.CTkLabel(row, text=label + ':', anchor='e').pack(side='left')
             ctk.CTkEntry(row, width=w, textvariable=self.v[key]
                          ).pack(side='left', padx=(4, 10))
-        ctk.CTkButton(row, text='执行拼接', width=96,
-                      command=self._on_merge).pack(side='left')
-        self.v_merge_result = tk.StringVar(value='')
-        ctk.CTkLabel(c, textvariable=self.v_merge_result, text_color=OK_BLUE,
-                     justify='left', anchor='w').pack(fill='x', pady=(4, 0))
-        ctk.CTkLabel(c, text='典型布局: 0x08000000 Bootloader 8KB | 0x08002000 APP | '
-                             '0x0800FFFC 有效标志 0xEEEEEEEE | Flash 64KB',
-                     text_color='gray50', justify='left', anchor='w',
-                     ).pack(fill='x', pady=(2, 0))
-
-        card, c = self._card(col, '运行日志 — OpenOCD 输出与固件工具结果',
-                             button='清空', command=self._clear_log)
-        card.grid(row=2, column=0, sticky='nsew', pady=(10, 0))
-        self.txt_log = ctk.CTkTextbox(c, font=MONO)
-        self.txt_log.pack(fill='both', expand=True)
-        self.txt_log.configure(state='disabled')
+        ctk.CTkButton(box, text='执行拼接', width=96,
+                      command=self._on_merge).pack(anchor='w', pady=(8, 0))
+        ctk.CTkLabel(box, textvariable=self.v_merge_result, text_color=OK_BLUE,
+                     justify='left', anchor='w').pack(fill='x', pady=(2, 0))
+        ctk.CTkLabel(box, text='典型布局: 0x08000000 Bootloader 8KB | 0x08002000 APP | '
+                               '0x0800FFFC 有效标志 0xEEEEEEEE | Flash 64KB',
+                     text_color='gray50', anchor='w').pack(fill='x', pady=(2, 0))
+        self._center_dialog(dlg, 720, 420)
 
     # ============================================================
     #  输入行辅助
@@ -515,6 +537,7 @@ class App(ctk.CTk):
                     else:
                         self._log('[失败] %s (退出码 %d)' % (title, code))
                         self._set_status('%s 失败' % title)
+                    self.proc = None            # 释放占用, 允许下一次操作
                     self._busy(False)
                     self._save()
         except queue.Empty:

FlashTool/src/publish_gitea.py

@@ -58,11 +58,13 @@ def git_remote_info():
 class Api:
     def __init__(self, base, owner, repo, token, insecure):
         self.api = f'{base}/api/v1/repos/{owner}/{repo}'
+        self.token = token
         self.headers = {'Authorization': f'token {token}'}
         self.ctx = ssl._create_unverified_context() if insecure else None
 
     def request(self, method, path, data=None, headers=None, retries=4):
-        """发请求; 实例 TLS 间歇性抽风(SSL UNEXPECTED_EOF), 连接级错误自动重试"""
+        """发请求; 实例 TLS 间歇性抽风(SSL UNEXPECTED_EOF), 连接级错误自动重试,
+        并改用 curl -k 兜底(urllib 的握手在该实例上可能持续失败)"""
         last = None
         for attempt in range(retries):
             req = urllib.request.Request(self.api + path, data=data, method=method,
@@ -75,9 +77,39 @@ class Api:
                 return e.code, json.loads(e.read() or b'{}')
             except (urllib.error.URLError, ssl.SSLError, OSError) as e:
                 last = e
+                try:
+                    status, body = self._curl(method, path, data, headers)
+                    if status > 0:
+                        return status, body
+                except Exception as ce:
+                    last = ce
                 time.sleep(1.0 + attempt)
         raise RuntimeError(f'Gitea 请求连续 {retries} 次失败: {last}')
 
+    def _curl(self, method, path, data=None, headers=None):
+        """curl 兜底: 返回 (status, json/None); 解析失败返回 (0, None) 交回上层重试"""
+        cmd = ['curl', '-k', '-s', '-X', method, '-w', '\n%{http_code}']
+        if data is not None:
+            cmd += ['--data-binary', '@-']
+        for key, value in self.headers.items():
+            cmd += ['-H', f'{key}: {value}']
+        for key, value in (headers or {}).items():
+            cmd += ['-H', f'{key}: {value}']
+        cmd.append(self.api + path)
+        proc = subprocess.run(cmd, input=data, capture_output=True, timeout=600)
+        out = proc.stdout.decode('utf-8', 'replace')
+        body, _, code = out.rpartition('\n')
+        try:
+            status = int(code.strip())
+        except ValueError:
+            return 0, None
+        if not body.strip():
+            return status, None
+        try:
+            return status, json.loads(body)
+        except ValueError:
+            return status, {'raw': body}
+
     def get_json(self, path):
         status, data = self.request('GET', path)
         return data if status == 200 else None