Initial commit

2026-03-02 21:24:12 +08:00
commit 4c93905128
98 changed files with 54745 additions and 0 deletions
--- a/Inc/board_config.h
+++ b/Inc/board_config.h
@@ -0,0 +1,111 @@
+#ifndef BOARD_CONFIG_H
+#define BOARD_CONFIG_H
+
+#define GD32E23XF4          0x10
+#define GD32E23XF6          0x20
+#define GD32E23XF8          0x40
+
+#define PROTOCOL_BOARD_TYPE       0x01  /**< 板卡类型标识 */
+
+#include "version.h"
+
+/* >>>>>>>>>>>>>>>>>>>>[IIC TYPE DEFINE]<<<<<<<<<<<<<<<<<<<< */
+
+// #define SOFTWARE_IIC // IIC Type : Software IIC
+#undef  SOFTWARE_IIC // IIC Type : Hardware IIC
+
+/* >>>>>>>>>>>>>>>>>>>>[DEBUG MODE]<<<<<<<<<<<<<<<<<<<< */
+
+// #define DEBUG_MODE // Operating Mode : Debug Mode
+#undef  DEBUG_MODE // Operating Mode : Release Mode
+
+/* >>>>>>>>>>>>>>>>>>>>[COMMAND DEBUG]<<<<<<<<<<<<<<<<<<<< */
+
+// #define COM_DEBUG // Enable Command Debug Information
+#undef  COM_DEBUG // Disable Command Debug Information
+
+/* >>>>>>>>>>>>>>>>>>>>[DEBUG ASSERTIONS DEFINE]<<<<<<<<<<<<<<<<<<<< */
+
+// #define DEBUG_VERBOSE // Debug Assertions Status : Debug Verbose Information
+#undef  DEBUG_VERBOSE // Debug Assertions Status : No Debug Verbose Information
+
+/******************************************************************************/
+
+/* Dynamic USART Configuration Structure */
+typedef struct {
+    uint32_t rcu_usart;
+    uint32_t usart_periph;
+    IRQn_Type irq_type;
+    void (*irq_handler)(void);  // 函数指针：指向中断处理函数
+} usart_config_t;
+
+extern usart_config_t g_usart_config;
+extern uint8_t g_mcu_flash_size;
+
+/* USART中断处理函数声明 */
+void usart0_irq_handler(void);
+void usart1_irq_handler(void);
+
+/******************************************************************************/
+
+#define RCU_GPIO_I2C         RCU_GPIOF
+#define RCU_I2C              RCU_I2C0
+#define I2C_SCL_PORT         GPIOF
+#define I2C_SCL_PIN          GPIO_PIN_1
+#define I2C_SDA_PORT         GPIOF
+#define I2C_SDA_PIN          GPIO_PIN_0
+#define I2C_GPIO_AF          GPIO_AF_1
+
+/******************************************************************************/
+
+#define LED_RCU              RCU_GPIOA
+#define LED_PORT             GPIOA
+#define LED_PIN              GPIO_PIN_7
+
+/******************************************************************************/
+
+#define UART_RCU             (g_usart_config.rcu_usart)
+#define UART_PHY             (g_usart_config.usart_periph)
+#define UART_IRQ             (g_usart_config.irq_type)
+#define UART_GPIO_RCU        RCU_GPIOA
+#define UART_GPIO_PORT       GPIOA
+#define UART_TX_PIN          GPIO_PIN_2
+#define UART_RX_PIN          GPIO_PIN_3
+#define UART_BAUDRATE        115200U
+
+/******************************************************************************/
+
+#define FAN_T_GPIO_PORT_RCU  RCU_GPIOA
+#define FAN_T_GPIO_PORT      GPIOA
+#define FAN_T_PWR_EN         GPIO_PIN_5
+#define FAN_T_PWM            GPIO_PIN_6
+#define FAN_T_DETECT         GPIO_PIN_4
+
+#define FAN_A_GPIO_PORT_RCU  RCU_GPIOA
+#define FAN_A_PWR_PORT_RCU   RCU_GPIOB
+#define FAN_A_GPIO_PORT      GPIOA
+#define FAN_A_PWR_PORT       GPIOB
+#define FAN_A_PWR_EN         GPIO_PIN_1
+#define FAN_A_PWM            GPIO_PIN_9
+#define FAN_A_DETECT         GPIO_PIN_10
+
+/******************************************************************************/
+
+// UV-LED NTC Temperature Sensor Definitions AD_CHANNEL_0
+#define LAMP_TEMP_GPIO_PORT_RCU  RCU_GPIOA
+#define LAMP_TEMP_GPIO_PORT      GPIOA
+#define LAMP_TEMP_AD_PIN         GPIO_PIN_0
+
+// DMD NTC Temperature Sensor Definitions AD_CHANNEL_1
+#define DMD_TEMP_GPIO_PORT_RCU RCU_GPIOA
+#define DMD_TEMP_GPIO_PORT     GPIOA
+#define DMD_TEMP_AD_PIN        GPIO_PIN_1
+
+/******************************************************************************/
+
+#define DEBUG_UART              USART0
+
+void mcu_detect_and_config(void);
+uint8_t get_flash_size(void);
+
+#endif //BOARD_CONFIG_H