fix(command):修复一些规范性问题，无实质修改。

Src/actuator.c

@@ -111,17 +111,17 @@ void actuator_stop(actuator_channel_t channel) {
     if(channel == ACTUATOR_CH1) {
         SEGGER_RTT_printf(0, "[ACTUATOR] Stopping Actuator CH1\n");
         timer_channel_output_pulse_value_config(ACTUATOR_PWM_TIMER, ACTUATOR_CH1_PWM_TIMER_CH, 999);    // Ensure CH1 is off
-        gpio_bit_set(ACTUATOR_CH1_GPIO_PORT, ACTUATOR_CH1_GPIO_PIN); // Set CH1 direction LOW
+        gpio_bit_set(ACTUATOR_CH1_GPIO_PORT, ACTUATOR_CH1_GPIO_PIN); // Set CH1 direction High
     } else if(channel == ACTUATOR_CH2) {
         SEGGER_RTT_printf(0, "[ACTUATOR] Stopping Actuator CH2\n");
         timer_channel_output_pulse_value_config(ACTUATOR_PWM_TIMER, ACTUATOR_CH2_PWM_TIMER_CH, 999);    // Ensure CH2 is off
-        gpio_bit_set(ACTUATOR_CH2_GPIO_PORT, ACTUATOR_CH2_GPIO_PIN); // Set CH2 direction LOW
+        gpio_bit_set(ACTUATOR_CH2_GPIO_PORT, ACTUATOR_CH2_GPIO_PIN); // Set CH2 direction High
     } else {
         // Invalid channel, handle error if necessary
         SEGGER_RTT_printf(0, "[ACTUATOR] Invalid channel specified for stop: %d\n", channel);
         timer_channel_output_pulse_value_config(ACTUATOR_PWM_TIMER, ACTUATOR_CH1_PWM_TIMER_CH, 999);    // Ensure CH1 is off
         timer_channel_output_pulse_value_config(ACTUATOR_PWM_TIMER, ACTUATOR_CH2_PWM_TIMER_CH, 999);    // Ensure CH2 is off
-        gpio_bit_set(ACTUATOR_CH1_GPIO_PORT, ACTUATOR_CH1_GPIO_PIN); // Set CH1 direction LOW
+        gpio_bit_set(ACTUATOR_CH1_GPIO_PORT, ACTUATOR_CH1_GPIO_PIN); // Set CH1 direction High
-        gpio_bit_set(ACTUATOR_CH2_GPIO_PORT, ACTUATOR_CH2_GPIO_PIN); // Set CH2 direction LOW
+        gpio_bit_set(ACTUATOR_CH2_GPIO_PORT, ACTUATOR_CH2_GPIO_PIN); // Set CH2 direction High
     }
 }

Src/command.c

@@ -491,6 +491,7 @@ void handle_command(const uint8_t *frame, uint8_t len) {
                 return;
 
             case 5u: // M5 stop actuator output
+            {
                 uint32_t p_val = 0;
                 bool has_p = find_parameter_value(cmd, cmd_len, 'P', &p_val);
                 if (!has_p || p_val > (uint32_t)ACTUATOR_CH2) {
@@ -500,6 +501,7 @@ void handle_command(const uint8_t *frame, uint8_t len) {
                 SEGGER_RTT_printf(0, "[COMMAND] M5 Command(STOP): Actuator Channel=%u \n", p_val);
                 actuator_stop((actuator_channel_t)p_val);
                 send_response(RESP_TYPE_OK, s_report_status_ok, sizeof(s_report_status_ok));
+            }
             return;
 
         /* ==========================================